User Panel
Originally Posted By stormhammer: Picked up a Geiselle upper today It has an interesting story behind it - supposedly, this is a true "near clone" URG-I, but it being black was only offered to employees. Guy I purchased it from bought it from someone in PA who lived near the Geissele factory and claimed to be an employee. Regardless, I like my tuning fork - and I pulled the REBCG to throw in the Ape Defense one to go with the lower ( the upper hasnt even seen any lube at all whatsoever. ) https://i.imgur.com/AWYrVy9.jpeg https://i.imgur.com/iqy3GeR.jpeg https://i.imgur.com/BPayb7y.jpeg https://i.imgur.com/ePnkni4.jpeg Was torn between what optics to throw on top ( between an LPVO, Aimpoint PRO, Sig Romeo 4 - or this ) decided to go with this since it also has the integrated laser and IR View Quote Attached File |
|
|
Originally Posted By Marksman14: /media/mediaFiles/sharedAlbum/952F8AAB-D023-4D6C-9DCA-877969C60675-474.gif View Quote I'll eventually source a Colt lower. |
|
|
|
|
Originally Posted By Marksman14: /media/mediaFiles/sharedAlbum/952F8AAB-D023-4D6C-9DCA-877969C60675-474.gif View Quote View All Quotes View All Quotes Originally Posted By Marksman14: Originally Posted By stormhammer: Picked up a Geiselle upper today It has an interesting story behind it - supposedly, this is a true "near clone" URG-I, but it being black was only offered to employees. Guy I purchased it from bought it from someone in PA who lived near the Geissele factory and claimed to be an employee. Regardless, I like my tuning fork - and I pulled the REBCG to throw in the Ape Defense one to go with the lower ( the upper hasnt even seen any lube at all whatsoever. ) https://i.imgur.com/AWYrVy9.jpeg https://i.imgur.com/iqy3GeR.jpeg https://i.imgur.com/BPayb7y.jpeg https://i.imgur.com/ePnkni4.jpeg Was torn between what optics to throw on top ( between an LPVO, Aimpoint PRO, Sig Romeo 4 - or this ) decided to go with this since it also has the integrated laser and IR /media/mediaFiles/sharedAlbum/952F8AAB-D023-4D6C-9DCA-877969C60675-474.gif |
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
|
IG @bayou_bengal-rifles
|
|
"A Mk18 is a handgun with a stock"/"10.3 is a 50 yard and in gun" - From SHTF AR Thread
|
|
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
View Quote This sir, is amazing |
|
|
View Quote Sir, that is an American Classic! That is probably more Clone correct that half the shit posted in this thread! |
|
|
I went AWOL long enough to see funnier sh!ts than I expected. Here I am, my inferiority complex flaring like my anemia whenever I reminded myself my URG-I is sitting atop an Aero clone lower.
|
|
|
|
Originally Posted By Roadblock: A. Wait and eventually build clone correct 14.5" upper for lower? B. Trade now for G Near Clone 14.5"? I have an 11.5" with an M4-A1 SBR'ed lower too so I'd just share that lower with both uppers if I trade. If I trade, the money saved would go towards some LVPO for my new Spear 308. https://lh3.googleusercontent.com/pw/AP1GczMB5-bMBMVdmc1faEAXFx_eWKY_Y0pf84j1JAhygajgzTk81B65wu35C_lDcOBvMdXbLViAZDJCrwY3AYUCou5Ht1MsGvr_LCStXkcSjoVEoIUcmp_E=w600 View Quote Really depends if care about clone correctness. The G will have their BCG, uppper and barrel/gasblock. Rail, charging handle and four prong will be correct. I built a correct 14.5 and its great. I also bought a G 10.3 URGI and I really like it. I wouldn't trade the colt lower if it were me. |
|
Free men do not ask for permission.
|
Originally Posted By -MainDisconnect-: Really depends if care about clone correctness. The G will have their BCG, uppper and barrel/gasblock. Rail, charging handle and four prong will be correct. I built a correct 14.5 and its great. I also bought a G 10.3 URGI and I really like it. I wouldn't trade the colt lower if it were me. View Quote That or a DD RIS III. Are those a clone yet? Actually had a 14.5" Near Clone upper for a bit but sold it when built my 11.5" clone correct upper. I was running my Razor on that for a bit but just recently bought a T2/Unity and much prefer it for the length. The plan was to just build a clone correct 14.5" at some point because I have this spare M4-A1 lower, and now a spare Razor LPVO. Looking at parts, looking at the cost of having D.Wilson p/w, shit maybe I shoulda just kept the G Near Clone! Someone offered me a G 14.5" upper they had bought during the Black Friday sale for the lower, but I can't decide. |
|
|
Originally Posted By Roadblock: A. Wait and eventually build clone correct 14.5" upper for lower? B. Trade now for G Near Clone 14.5"? I have an 11.5" with an M4-A1 SBR'ed lower too so I'd just share that lower with both uppers if I trade. If I trade, the money saved would go towards some LVPO for my new Spear 308. https://lh3.googleusercontent.com/pw/AP1GczMB5-bMBMVdmc1faEAXFx_eWKY_Y0pf84j1JAhygajgzTk81B65wu35C_lDcOBvMdXbLViAZDJCrwY3AYUCou5Ht1MsGvr_LCStXkcSjoVEoIUcmp_E=w600 View Quote If you’re anything like me, you’ll instantly regret parting with that and try to re-find one only to be shocked how hard or expensive it will be. Especially for something that is easy to source/build yourself. |
|
|
Originally Posted By -MainDisconnect-: Really depends if care about clone correctness. The G will have their BCG, uppper and barrel/gasblock. Rail, charging handle and four prong will be correct. I built a correct 14.5 and its great. I also bought a G 10.3 URGI and I really like it. I wouldn't trade the colt lower if it were me. View Quote |
|
IG @bayou_bengal-rifles
|
There's no way I would trade that lower.
|
|
I now have a ban button. Want to see me use it? Keep it up. - Lancelot
You do not fight out of hate, but rather out of the love and compassion you have for those you are trying to protect. |
Originally Posted By Roadblock: A. Wait and eventually build clone correct 14.5" upper for lower? B. Trade now for G Near Clone 14.5"? I have an 11.5" with an M4-A1 SBR'ed lower too so I'd just share that lower with both uppers if I trade. If I trade, the money saved would go towards some LVPO for my new Spear 308. https://lh3.googleusercontent.com/pw/AP1GczMB5-bMBMVdmc1faEAXFx_eWKY_Y0pf84j1JAhygajgzTk81B65wu35C_lDcOBvMdXbLViAZDJCrwY3AYUCou5Ht1MsGvr_LCStXkcSjoVEoIUcmp_E=w600 View Quote Keep that lower, collect parts, and build a 14.5. You might as well, since that lower is already the hardest part. |
|
|
Originally Posted By suitnboots: I went AWOL long enough to see funnier sh!ts than I expected. Here I am, my inferiority complex flaring like my anemia whenever I reminded myself my URG-I is sitting atop an Aero clone lower. View Quote Lower is going to be 99.9% NOT correct. Even if 80% and correctly marked. No third pin auto sear. As long as correct A2 lower style you're GTG. Just no fixed bowed/enlarged trigger guards. |
|
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22,23,24' Afghanistan: 09,10,11',14',17',18',19',20'&21' |
Originally Posted By Combat_Diver: Lower is going to be 99.9% NOT correct. Even if 80% and correctly marked. No third pin auto sear. As long as correct A2 lower style you're GTG. Just no fixed bowed/enlarged trigger guards. View Quote I know, CD, but at the same time, my stubbornness cause my inferiority complex to flame like nothing else. But, you know, thanks to you telling me that it's my rifle, and I could have it my way, that I was confident enough to post my rifle back then. Also, declassification - my pivot and take down pins are titanium, and my trigger guard is polymer. Kept to GI profile and look, of course. LOL! |
|
|
Originally Posted By Combat_Diver: Current big Army issue in black and coyote https://www.ar15.com/media/mediaFiles/32677/IMG_0136_jpeg-3191876.JPGhttps://www.ar15.com/media/mediaFiles/32677/IMG_0135_jpeg-3191877.JPG View Quote I've seen VTAC multicam coyote slings and some unknown (Vickers?) coyote slings in some of your pics I think. The VTAC and Vickers web sling both seem decent, but the Vickers padded slings don't seem to hold up well, but the VTAC padded slings seem to hold up much better, as far as padded slings go. I see these4 sling sell with optional "upgraded" or "heavy duty" adjusters, that are metal instead of polymer. Some people claim the metal adjusters scratch up their rifles and gear. Do the military purchased slings have metal or polymer adjusters? It looks like VTAC is the way to go if a padded sling is desired and VTAC or Vickers will do for web slings. |
|
|
Originally Posted By Combat_Diver: Current big Army issue in black and coyote https://www.ar15.com/media/mediaFiles/32677/IMG_0136_jpeg-3191876.JPGhttps://www.ar15.com/media/mediaFiles/32677/IMG_0135_jpeg-3191877.JPG View Quote I've seen VTAC multicam coyote slings and some unknown (Vickers?) coyote slings in some of your pics I think. The VTAC and Vickers web sling both seem decent, but the Vickers padded slings don't seem to hold up well, but the VTAC padded slings seem to hold up much better, as far as padded slings go. I see these4 sling sell with optional "upgraded" or "heavy duty" adjusters, that are metal instead of polymer. Some people claim the metal adjusters scratch up their rifles and gear. Do the military purchased slings have metal or polymer adjusters? It looks like VTAC is the way to go if a padded sling is desired and VTAC or Vickers will do for web slings. |
|
|
Originally Posted By The_Hammer: There's no way I would trade that lower. View Quote View All Quotes View All Quotes Originally Posted By suitnboots: Keep that lower, collect parts, and build a 14.5. You might as well, since that lower is already the hardest part. Yeah, I think you guys are right. I already got rid of the 14.5" G upper I had with the plans to build a clone correct one after I finished my 11.5" clone correct build. I'd be going backwards to get rid of my spare COLT lower just to get another G upper. I guess there is no rush, I can piece it together as sales happen. Maybe I can track down a 7000 series, nsn marked, no qd socketed blem rail and save a few dollars. What is the most correct stripped upper for a clone correct 14.5"? Cage code or just whatever has been seen on COLT rifles? |
|
|
|
Originally Posted By Roadblock: Yeah, I think you guys are right. I already got rid of the 14.5" G upper I had with the plans to build a clone correct one after I finished my 11.5" clone correct build. I'd be going backwards to get rid of my spare COLT lower just to get another G upper. I guess there is no rush, I can piece it together as sales happen. Maybe I can track down a 7000 series, nsn marked, no qd socketed blem rail and save a few dollars. What is the most correct stripped upper for a clone correct 14.5"? Cage code or just whatever has been seen on COLT rifles? View Quote Hell, save yourself some time and get the upper from Thoroughbred, which, the only thing that sucks is that they don't put muzzle devices on them beforehand anymore these days. There are FF556 out there that runs at $152 before tax and potentially shipping, so that doesn't take up much, except the last part is pin and weld. I think G will still fish out a non-QD socket rail for you, if you negotiate with them by phone, that is. Upper receiver wise, unless you rat yourself out, even an FN will do, or anything milspec without any branding or out-of-the-norm markings, to be honest. |
|
|
Originally Posted By Air_Soft_Contractor: I've seen VTAC multicam coyote slings and some unknown (Vickers?) coyote slings in some of your pics I think. The VTAC and Vickers web sling both seem decent, but the Vickers padded slings don't seem to hold up well, but the VTAC padded slings seem to hold up much better, as far as padded slings go. I see these4 sling sell with optional "upgraded" or "heavy duty" adjusters, that are metal instead of polymer. Some people claim the metal adjusters scratch up their rifles and gear. Do the military purchased slings have metal or polymer adjusters? It looks like VTAC is the way to go if a padded sling is desired and VTAC or Vickers will do for web slings. View Quote View All Quotes View All Quotes Originally Posted By Air_Soft_Contractor: Originally Posted By Combat_Diver: Current big Army issue in black and coyote https://www.ar15.com/media/mediaFiles/32677/IMG_0136_jpeg-3191876.JPGhttps://www.ar15.com/media/mediaFiles/32677/IMG_0135_jpeg-3191877.JPG I've seen VTAC multicam coyote slings and some unknown (Vickers?) coyote slings in some of your pics I think. The VTAC and Vickers web sling both seem decent, but the Vickers padded slings don't seem to hold up well, but the VTAC padded slings seem to hold up much better, as far as padded slings go. I see these4 sling sell with optional "upgraded" or "heavy duty" adjusters, that are metal instead of polymer. Some people claim the metal adjusters scratch up their rifles and gear. Do the military purchased slings have metal or polymer adjusters? It looks like VTAC is the way to go if a padded sling is desired and VTAC or Vickers will do for web slings. My padded Vickers held up really well through 3 deployments. The issue I had was always having to adjust the slider as it would slowly loosen while walking around. I like the locking feature of the adjuster on the VTAC. |
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Any HRF magwells observed? Also, does the MK8 barrel nut work with the MK16/URG-I rail?
|
|
Why is the sky blue?
What makes the green grass grow? |
Originally Posted By SecretSquirell: My padded Vickers held up really well through 3 deployments. The issue I had was always having to adjust the slider as it would slowly loosen while walking around. I like the locking feature of the adjuster on the VTAC. View Quote View All Quotes View All Quotes Originally Posted By SecretSquirell: Originally Posted By Air_Soft_Contractor: Originally Posted By Combat_Diver: Current big Army issue in black and coyote https://www.ar15.com/media/mediaFiles/32677/IMG_0136_jpeg-3191876.JPGhttps://www.ar15.com/media/mediaFiles/32677/IMG_0135_jpeg-3191877.JPG I've seen VTAC multicam coyote slings and some unknown (Vickers?) coyote slings in some of your pics I think. The VTAC and Vickers web sling both seem decent, but the Vickers padded slings don't seem to hold up well, but the VTAC padded slings seem to hold up much better, as far as padded slings go. I see these4 sling sell with optional "upgraded" or "heavy duty" adjusters, that are metal instead of polymer. Some people claim the metal adjusters scratch up their rifles and gear. Do the military purchased slings have metal or polymer adjusters? It looks like VTAC is the way to go if a padded sling is desired and VTAC or Vickers will do for web slings. My padded Vickers held up really well through 3 deployments. The issue I had was always having to adjust the slider as it would slowly loosen while walking around. I like the locking feature of the adjuster on the VTAC. Thanks for the info. I was going by the reviews I've seen on the Internet. The only complaints I've seen about the VTAC slings are that they are exceedingly long. One place had them on sale for half price. I wanted both coyote and multicam slings, but they had sold out of coyote. So far I've bought one padded multicam VTAC for my 14.5" URG-I and one multicam web VTAC for my 11.5" URG-I. I haven't assembled the URG-I's yet, but I think I've got all of the pieces now. |
|
|
|
Originally Posted By Air_Soft_Contractor: Thanks for the info. I was going by the reviews I've seen on the Internet. The only complaints I've seen about the VTAC slings are that they are exceedingly long. One place had them on sale for half price. I wanted both coyote and multicam slings, but they had sold out of coyote. So far I've bought one padded multicam VTAC for my 14.5" URG-I and one multicam web VTAC for my 11.5" URG-I. I haven't assembled the URG-I's yet, but I think I've got all of the pieces now. View Quote View All Quotes View All Quotes Originally Posted By Air_Soft_Contractor: Originally Posted By SecretSquirell: Originally Posted By Air_Soft_Contractor: Originally Posted By Combat_Diver: Current big Army issue in black and coyote https://www.ar15.com/media/mediaFiles/32677/IMG_0136_jpeg-3191876.JPGhttps://www.ar15.com/media/mediaFiles/32677/IMG_0135_jpeg-3191877.JPG I've seen VTAC multicam coyote slings and some unknown (Vickers?) coyote slings in some of your pics I think. The VTAC and Vickers web sling both seem decent, but the Vickers padded slings don't seem to hold up well, but the VTAC padded slings seem to hold up much better, as far as padded slings go. I see these4 sling sell with optional "upgraded" or "heavy duty" adjusters, that are metal instead of polymer. Some people claim the metal adjusters scratch up their rifles and gear. Do the military purchased slings have metal or polymer adjusters? It looks like VTAC is the way to go if a padded sling is desired and VTAC or Vickers will do for web slings. My padded Vickers held up really well through 3 deployments. The issue I had was always having to adjust the slider as it would slowly loosen while walking around. I like the locking feature of the adjuster on the VTAC. Thanks for the info. I was going by the reviews I've seen on the Internet. The only complaints I've seen about the VTAC slings are that they are exceedingly long. One place had them on sale for half price. I wanted both coyote and multicam slings, but they had sold out of coyote. So far I've bought one padded multicam VTAC for my 14.5" URG-I and one multicam web VTAC for my 11.5" URG-I. I haven't assembled the URG-I's yet, but I think I've got all of the pieces now. Yeah, they can be a bit long but when you're covered in body armor, mags, radios, day pack, and all of the other fun stuff it can be beneficial. |
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By SecretSquirell: Yeah, they can be a bit long but when you're covered in body armor, mags, radios, day pack, and all of the other fun stuff it can be beneficial. View Quote View All Quotes View All Quotes Originally Posted By SecretSquirell: Originally Posted By Air_Soft_Contractor: Originally Posted By SecretSquirell: Originally Posted By Air_Soft_Contractor: Originally Posted By Combat_Diver: Current big Army issue in black and coyote https://www.ar15.com/media/mediaFiles/32677/IMG_0136_jpeg-3191876.JPGhttps://www.ar15.com/media/mediaFiles/32677/IMG_0135_jpeg-3191877.JPG I've seen VTAC multicam coyote slings and some unknown (Vickers?) coyote slings in some of your pics I think. The VTAC and Vickers web sling both seem decent, but the Vickers padded slings don't seem to hold up well, but the VTAC padded slings seem to hold up much better, as far as padded slings go. I see these4 sling sell with optional "upgraded" or "heavy duty" adjusters, that are metal instead of polymer. Some people claim the metal adjusters scratch up their rifles and gear. Do the military purchased slings have metal or polymer adjusters? It looks like VTAC is the way to go if a padded sling is desired and VTAC or Vickers will do for web slings. My padded Vickers held up really well through 3 deployments. The issue I had was always having to adjust the slider as it would slowly loosen while walking around. I like the locking feature of the adjuster on the VTAC. Thanks for the info. I was going by the reviews I've seen on the Internet. The only complaints I've seen about the VTAC slings are that they are exceedingly long. One place had them on sale for half price. I wanted both coyote and multicam slings, but they had sold out of coyote. So far I've bought one padded multicam VTAC for my 14.5" URG-I and one multicam web VTAC for my 11.5" URG-I. I haven't assembled the URG-I's yet, but I think I've got all of the pieces now. Yeah, they can be a bit long but when you're covered in body armor, mags, radios, day pack, and all of the other fun stuff it can be beneficial. Long? Lol. You adjust them and cut the excess off. |
|
|
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22,23,24' Afghanistan: 09,10,11',14',17',18',19',20'&21' |
Originally Posted By suitnboots: HRF mag well has been seen in the wild. FDE. The Mk. 8 nut doesn't work with Mk. 16. Hell, I don't even know if the Mk. 14 would. View Quote View All Quotes View All Quotes Originally Posted By suitnboots: Originally Posted By 11boomboom: Any HRF magwells observed? Also, does the MK8 barrel nut work with the MK16/URG-I rail? HRF mag well has been seen in the wild. FDE. The Mk. 8 nut doesn't work with Mk. 16. Hell, I don't even know if the Mk. 14 would. Why do you say that? |
|
|
Originally Posted By Combat_Diver: Don't cut, "S" fold or run under keepers. Once its gone, its gone forever. View Quote View All Quotes View All Quotes Originally Posted By Combat_Diver: Originally Posted By M4A1SOPMOD: Long? Lol. You adjust them and cut the excess off. Don't cut, "S" fold or run under keepers. Once its gone, its gone forever. Yup. I wanted to keep as much material as possible just in case I'll need it longer at a later time. |
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
|
Originally Posted By suitnboots: Which do you mean, the mag well or the barrel nut? I remembered some random thread on a random forum, many moons ago, asking a similar question, leading me into some rabbit tunnel I don't want to come back to. View Quote View All Quotes View All Quotes Originally Posted By suitnboots: Originally Posted By pezboytate: Why do you say that? Which do you mean, the mag well or the barrel nut? I remembered some random thread on a random forum, many moons ago, asking a similar question, leading me into some rabbit tunnel I don't want to come back to. The barrel nut stuff. As far as I know, the only difference is the 2nd groove. If that's the case, a 2 groove handguard won't work on a 1 groove barrel nut but a 1 groove handguard will work on a 2 groove barrel nut. |
|
|
Originally Posted By suitnboots: HRF mag well has been seen in the wild. FDE. The Mk. 8 nut doesn't work with Mk. 16. Hell, I don't even know if the Mk. 14 would. View Quote My friend in group uses black ones. Attached File |
|
|
Originally Posted By brodband8: My friend in group uses black ones. https://www.ar15.com/media/mediaFiles/283538/438312494_971028954072155_55852412009108-3199473.JPG View Quote Thanks for sharing. I only saw the FDE something like two years back, and that was the first time one was posted (I think). |
|
|
Originally Posted By brodband8: My friend in group uses black ones. https://www.ar15.com/media/mediaFiles/283538/438312494_971028954072155_55852412009108-3199473.JPG View Quote |
|
IG @bayou_bengal-rifles
|
|
IG @bayou_bengal-rifles
|
Originally Posted By suitnboots: HRF mag well has been seen in the wild. FDE. The Mk. 8 nut doesn't work with Mk. 16. Hell, I don't even know if the Mk. 14 would. View Quote View All Quotes View All Quotes Originally Posted By suitnboots: HRF mag well has been seen in the wild. FDE. The Mk. 8 nut doesn't work with Mk. 16. Hell, I don't even know if the Mk. 14 would. Originally Posted By brodband8: My friend in group uses black ones. https://www.ar15.com/media/mediaFiles/283538/438312494_971028954072155_55852412009108-3199473.JPG |
|
Why is the sky blue?
What makes the green grass grow? |
Originally Posted By pezboytate: The barrel nut stuff. As far as I know, the only difference is the 2nd groove. If that's the case, a 2 groove handguard won't work on a 1 groove barrel nut but a 1 groove handguard will work on a 2 groove barrel nut. View Quote Would it affect torque, zeroing, or such? Genuinely asking, since I have never really attempted to tinker with handguards. BCG and everything else would be open season, but even within the same company, I'm wary of tinkering with different barrel nuts and handguards if they're not meant to be the same set. |
|
|
Originally Posted By LsuJon: Gonna need a ref pic View Quote View All Quotes View All Quotes Originally Posted By LsuJon: Originally Posted By brodband8: He said you can clone his cock and balls lol Casting couch be busy. Oh and, don't forget to at least hang the rifle nearby. |
|
|
Originally Posted By suitnboots: Would it affect torque, zeroing, or such? Genuinely asking, since I have never really attempted to tinker with handguards. BCG and everything else would be open season, but even within the same company, I'm wary of tinkering with different barrel nuts and handguards if they're not meant to be the same set. View Quote Geissele has openly come out in the past and said mk14/mk16 barrel nut are exactly the same, but that the mk8/4 barrel nut doesn’t achieve the same lock up. They’ve never actually explained why. Weirdly, I’ve done it and it works so I’m not sure what they actually mean but rest assured according to them, the 14 and 16 are at least absolutely interchangeable. |
|
|
Originally Posted By india13c: Geissele has openly come out in the past and said mk14/mk16 barrel nut are exactly the same, but that the mk8/4 barrel nut doesn’t achieve the same lock up. They’ve never actually explained why. Weirdly, I’ve done it and it works so I’m not sure what they actually mean but rest assured according to them, the 14 and 16 are at least absolutely interchangeable. View Quote Tango Mike. Looks like one more thing to know for me. I think, for the Mk. 4 and 8, must be due to how their barrel nuts handle the extra materials differently to how the Mk. 14 and 16 handles it, i.e. 4 and 8 is bulkier, while 14 and 16 are, generally, slimmer, and on similar profiles for the latter two. |
|
|
Originally Posted By suitnboots: Tango Mike. Looks like one more thing to know for me. I think, for the Mk. 4 and 8, must be due to how their barrel nuts handle the extra materials differently to how the Mk. 14 and 16 handles it, i.e. 4 and 8 is bulkier, while 14 and 16 are, generally, slimmer, and on similar profiles for the latter two. View Quote No idea, but I can tell you I’ve put a mk16 on a mk8 barrel nut with no issue and it locks up perfectly fine. Will it have problems long term? Idk, but Geissele says it’s not as secure but I don’t see why that would be true. The only thing I did seem to notice is that the mk8 barrel nut groove seems to allow more forward and backward movement to the mk16 than the mk16 nut but lateral movement or how tight it slides on seems to be no different. |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.