User Panel
Posted: 6/26/2005 8:18:00 PM EDT
|
|
I received my shipment of Enidine buffer and ran about 100rds through it. While I didn't find a lot of reduction in recoil I did find that recoil was smoothe (if that makes sense). I seemed to get back on target faster as well. C4 www.gandrtactical.com |
|
|
the mgi in my .223/5.56 makes if feel like a hot .22lr
no noticable movement in muzzle rise with a phantom 5c1, stays on paper |
|
I put an MGI buffer in my midlength RRA and there was a noticable difference. However, the big news was when I put it in my issue Colt M4A1 last drill weekend and tried full auto. WOW! what a difference. I had one guy try it and didn't tell him I changed anything. his response, "There's no recoil!" While not entirely true, it is definitely much more controllable. They've been threatening us with deployment for years, and when it finally happens, I'm taking my MGI buffer, and several other guys, in fact all who tried it, said they will buy them, too.
|
|
Do any you guys who own either one see any possible reliability issues down the road due to problems with the moving parts in these buffers?
|
|
I would like to know what these actually do to the cyclic rate of hte M-16?
Do they really slow them down? |
|
The MGI RRB will slow the rate by approximately 15%-20%, depending on the gun.
A gun that cycles at 750rpm, will go to about 625rpm with the MGI RRB in it. A gun that is overcycling at about 900rpm will drop to about 725rpm. Controllability is increased to the level that full 30 round mag dumps in full auto are possible, while still retaining sight picture the entire time. We've dumped full mags in a single burst that were in a 6" circle at 50 yds. I don't know what the Enidine will do. |
|
what about single shots on the AR...will the MGI help reduce muzzle flip at all for precision shooting?
|
|
yes it will! shooting prone there is more recoil felt, while standing there is an amazing reduce in muzzle rise. like shooting a hot .22lr!! |
|
|
you felt recoil is still there though slight. works like a real good muzzle brake imo! there is still a slight jump but not as much as it was without the mgi rrb |
|
|
An ARFCOM member who has one of these MGI buffers has volunteered to lend me his; I will take it to the NORCAL shoot at the end of the month, try it myself, and let whoever else is there try it. I will report back with my impressions.
It will be used in a Bushmaster 16" HBAR with telestock. I will compare it with the standard buffer that came with my VLTOR, and a DPMS two-piece 9mm heavy buffer. We are scientists after all. |
|
I have a feeling that you are going to like it.
This is one of the most popular items that we manufacture. Literally hundreds were recently sold in the Group Buy to Arfcom members, and I haven't got any negative comments from anybody about it. They all love it. I'l be very interested to hear your impressions. |
|
Look forward to your report- I'm getting more and more interested in one of these buffers (along with other stuff that twl sells!) |
|
|
i can tell you that it cut "felt recoil" on my .50beowulf by about 30-40% compared to the rifle buffer.
|
|
Is there any obvious difference with the MGI buffer in a semi-auto ar? Or is the buffer really benificial in a full-auto?
|
|
It keeps the muzzle on target for faster follow-up shots. |
|
|
i noticed it considerably in my semi-auto ar! nearly cancelled muzzle rise and cut whatever recoil there is on the .223/5.56 drastically! i would recommend it to anyone. |
|
|
Just returned home from the range...
We tested the Enidine hydraulic buffer, the MGI rate-reducing buffer, and a standard carbine buffer in a test rig equipped as follows. A3 Bushmaster Superlight with A2 FH 511 Eotech, GG&G A2 BUIS RRA 6 position stock. Our test ammo was new manufacture Federal XM193. We chose a basic lightweight rifle to amplify any changes in felt recoil and muzzle rise. Comparing both enhanced buffers using the standard carbine buffer as the baseline, recoil was definately smoother and not as much of the sharp all-at-once hit characteristic of the carbine buffer. Muzzle climb and movement off of target was substantially reduced with either of the enhanced buffers. However, the Enidine buffer did have a noticable, however slight, advantage compared to MGI. It simply shot smoother, and the front sight simply stayed closer to the target area, whereas the MGI tended to drift to one side more. That could possibly be do to the MGIs increased weight. The Enidine has the edge here. The price advantage also goes to the Enidine. MGI selling for $140-150, the Enidine is at $100. As far as for durability, Enidine has done testing to 1.5 million simulated firing cycles without failure. Enidine is a very large hydraulic company that manufactures hydraulics for aerospace, industry, defense, and more. Enidine manufactures the soft mount for the .50 cal machine gun, and the hydraulic buffer in the M249 SAW. They have plenty of experience and success with hydraulics in weapon applications. Enidine Defense Products Testing has shown that Enidine buffer reduces the rate of fire 200 rounds per minute on an M4. PK Firearms |
|
Paul - Thanks for the range report!
I'm starting to really like the idea of the recoil/rate reducing buffers. I've never really considered them because I've always thought the AR was light recoiling rifle but it's really all about controlling your weapon and and getting fast hits where it counts. Currently I'm using H-buffers and Tungsten H-buffers. If these buffers do what they claim, and it sounds like they do, then they would be a good addition to a fighting gun. I would imagine having one of these would improve the shot to shot speed of my NSR's and that can only be a good thing. A concern I have with these buffers is reliability. I'm paranoid that introducing more moving parts into my carbine would possibly decrease the reliability. I have no experience with these buffers so please educate me. Also, will these buffers work with a mid-length gas system and what effect will they have on underpowered ammo like Wolf? I use Wolf for short range (0-50 yard) practice and drills cheap to shoot and my carbine eats it like candy. |
|
I'd like to echo/amplify some of the things Yojimbo said...
I too overlooked the enhanced buffers, but now that the benefits are clear, the first question is "WHY NOT?" WHY DOESN'T the military use these if they work? Conservatism and Cost, IMHO. The hydraulic unit, however, is standard in Diemaco's LMG variant of the M-16, and was also standard in the Colt ACR rifle. On the "reliability issue"...this seems to be a non-issue to me. If the recoil dampening functionality goes tits up, what are you left with? Something EXACTLY THE SAME as a "standard" buffer! So, in the event that one of these fails down the road...your rifle will STILL FUNCTION, and you will have enjoyed the benefits while it lasted...unless civilization has collapsed, trash the broken buffer and buy another one... Using "underpowered" ammo shold not be an issue either...the round either has enough energy to cycle the action or it doesn't...all an enhanced buffer will do is dampen the recoil by stretching out its duration in time...the bleed gas shoves the bolt group back, and the recoil spring drives it forward. The buffer plays no part in either operation. Mine will also go in a Midlength upper also...improving the performance of an item itself an improvement (midlength gas system) of a PROVEN (carbine gas system) weapon. I see no reason why one of these buffers would be DETRIMENTAL... As for the choice between the two enhanced buffers...I too am skeptical of complex systems; the edge here would seem to go to the MGI, as its a simple concept. But the Endine folks seem to have a hard knowlege of military requirements, so... In the absence of hard data from the manufacturers (time/force curves, accelerometer readings, etc. which I'm sure exist, but are not given out perhaps because they think the public are not interested and/or knowlegable enough to understand them) I will prolly have to [arfcom]BUY BOTH[/arfcom] and base my conclusions on sensed/percieved feedback (slaps to the shoulder)... |
|
Actually, the MGI RRB has been in limited use by certain groups of active duty U.S. military operators for a number of years now.
It is just not in general issue, nor is it probably likely to become general issue. Since the design resulted from a partnership between Mack Gwinn and Jim Sullivan, with Sullivan being one of the most significant parties in the original design of the AR15, along with Gene Stoner, this RRB buffer has been very closely matched to the characteristics and needs of the AR15 carbine as assessed by one of the members of the original design team for the weapon. I haven't tried the Enidine, but if it is doing as well as PK Firearms says, then it must be a nice unit. At this time, the RRB is the benchmark to beat. |
|
unbias opinion- teh mgi is less busy looking and less to it, which in turn less problems
though im sure both have been fully tested the hydro one would render weapon useless if it were to ever fail. that being said i was told that the Enidine Hydraulic buffer has only a 1yr warranty to mgi/twl lifetime replacement warranty. hard to not believe the dealers that are offering the products to be un-bias about the other. though the dealers here are honest there still would be in favor of their own product. just my .02 that reviews and opinions of end users are unbias |
|
Except that the MGI weighs 2 1/2 times more than the standard CAR buffer. If something should happen to the plunger assembly, you still have a heavy buffer (7 ounces or so, IIRC). And like eklikwhoa mentioned above, it has a lifetime warranty. |
|
|
Colt's did try to sell their hydraulic buffer to the Big Army (along with allot of other things), and they declined. Now that there is a shooting war on maybe Big Army will take another look? |
|
|
Okay then, how much is too much when it comes to buffer weight? It seems that past a certain weight, a heavy buffer would tend to exacerbate the recoil and rduce controllability, due to the greater mass sliding back and forth in the buttstock... |
||
|
I am not a MGI dealer, but I have a MGI buffer in my SPR, oh, my God. Smooth, lighter recoil and made it more controllable. My Crane stock SPR was so impressive, a local PD ask me to build five for their perimeter team. Storm, don't you go to Burro Canyon shoot?? Make sure i bring the SPR next time. |
|
|
These glowing reports on the MGI buffer make me wish that my credit card hadn't expired over here.
|
|
i let some guys at the range shoot my ar once and they thought either theirs or mines had something wrong with it. they asked why mine had such light recoil and theres much more. told them about the buffer and they still didnt believe that the buffer did all that |
||
|
I've got 7.1oz for the MGI RRB. Anyone know the weight of the Enidine unit? Thanks.
|
|
The Enidine weighes 4.2 oz Brett |
|
|
I hope to shoot both at the ARFCOM NORCAL meet at the end of the month.
I tried to order the Enidine from PKFirearms today but no one answered the phone |
|
We were in and out of the gun shop today. Some of was when we were at our range with a customer who was testing his new Enidine buffer. He was very pleasedh Brett Walker |
|
|
I just tried out my new Endine buffer, It is smoooooth to say the least, I use my M-4 at work and quick and accurate follow up shots are paramount, If needed. This unit works very well, and is well made, A buddy of mine overseas wants one for his duty weapon, and I will be getting it from PK Firearms as well, thanks for the great service! Sorry you did not catch them today it was my fault !
|
|
What about the AAC buffer? How does it compare to these other two? It's the only one that I've seen that mentions that it improves functioning in a 9mm (I'm sure the others do too), and it's cheaper than the others at $75. Anyone have any experience them?
|
|
Don't know about the hydraulic one, but my MGI heavy is fantastic. In the M4 it smoothes it out, in the Midlength it makes the whole deal velvet.
|
|
Enidine had their buffers for sale at the SHOT Show for $75. I wish I would have grabbed a couple.hinking.gif
|
|
thats a good price! mgi/twl had a group buy and the mgi rrb was going for $100+shipping,, wished i would have picked up a few extras. |
|
|
i would pick either buffers in this thread over the aac, the aac takes place of the spring and buffer so when it goes the rifle is rendered useless. with the two discussed in this thread they would keep going and act as a std heavy/heavier buffer |
|
|
I recently got a MGI RRB for my new RRA carbine. I took it to the range with my Colt CAR for comparison. The MGI buffer was fantastic!! A mind boggling difference in recoil and muzzle climb. I'm sold 150%.
I just wish there was another group buy so I can pick up 3 more to tame the Colts! |
|
The MGI buffer has been very helpful. I have a Colt M16 RR. When I first set up a Colt 9mm subgun upper on my RR, I had buffer problems. I had used Colt carbine parts to set up the upper. The info from the "Rimfire and Pistol Calibers" forum was that I needed the extra heavy buffer for the 9mm set up. The upper worked fine. The problem was the 16 lower with the extra heavy 9mm buffer wouldn't run the .223 upper in full auto. It would work in semi. But in full auto it would fire one round, the gun would cycle, there would be a round in the chamber but the hammer wouldn't be cocked. So I would have to switch buffers when I switched calibers. What a pain.
After seeing the artical in Small Arms Review about the MGI buffer, I tried one. It is smooth, reduces muzzle rise, and slows FA cyclic rate. Also another great thing is I can run either 9mm or .223 and don't have to switch buffers. I was so impressed I bought a second MGI RR buffer for my semi. Great product. I would buy another. Scott |
|
First of all let me say hello to all. I'm new to the board and AR15 rifles in general but just recieved my first (RRA Varmint). This might sound like a stupid question from a rookie but what is the advantage of these hydralic buffers over the pneumatic ones I have read about. Great board by the way and I'm proud to part of it and the whole AR15 addiction.......
|
|
the mgi is neither, works with some sort of spring the advantage would be less recoil, faster follow up shots, less muzzle rise, all in all a more controlable rifle. but i would just shoot the rifle as is and then add to it later, that way you dont create problems. |
|
|
just to add
i shot my recon/reece midlength this weekend with the mgi buffer in it and was really amazed at the difference! i could hear the bolt cycle! recoil was like nothing!!! if i were to have a suppressor on this thing i probably wouldnt have known that it fired other than the hammer dropping. |
|
Do either of these work w/ an A2 buttstock? Are either needed w/ an A2 buttstock?
|
|
i know that the mgi comes with a spacer that would allow their buffer to work in an a2/a1 length stock. i have one in an a2 stock but its for my beowulf. |
|
|
Jmart,
The MGI RRB buffer is available with an optional delrin spacer which is inserted into the A1 of A2 rifle buffer stock to take up the added space at the back end of the rifle length buffer tube. This makes the RRB buffer useful in a carbine by just using the buffer alone, and in a rifle by using the buffer/spacer combination. Very versatile and effective in either the rifle or carbine system, and will just about any caliber that I can think of that fits in an AR15 platform. Yes, the rifle length systems will benefit from this buffer. |
|
I bought a Enidine from PK monday and if I get it in by this weekend Ill have a range report by monday.
Remman |
|
thanks for info. |
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.