User Panel
Posted: 5/16/2016 12:49:02 PM EDT
I dove head first into Keymod, but I'm finding M Lok looks pretty good too, maybe even a bit better.
Anyone have any thoughts about one being superior to the other? |
|
I had MLOK, now I have Keymod. MLOK was easier to work with to me and seems a lot more secure (I could imagine a keymod accessory taking a hard but from the front and shifting back to the round section and popping out).
But for most people's use, I really doubt it matters. I would base the decision on what handguard you want. (I.e., some only come in one system or the other). |
|
MLOK camp here. I prefer it's lockup method. It looks better as well. Also, most new handguards are MLOK. BCM is really keeping keymod alive IMO?
|
|
When one or the other becomes standardized, I'll switch from rails.
M Loc seems better, but I'll give it a few years and see what develops. KeyMod was still a relatively new thing when M Loc came out, so maybe there will be a "Cross Loc" before long that makes them both obsolete. Until something has been around for 10+ years, and is considered the "standard", it's still a fad IMO. |
|
I've had both and consider them equal as far as functionality and capability are concerned. I sold the Keymod rail because I bought a MK8. If I had to choose I'd go with M-Lok just because I think it has a cleaner look.
|
|
Quoted:
I had MLOK, now I have Keymod. MLOK was easier to work with to me and seems a lot more secure (I could imagine a keymod accessory taking a hard but from the front and shifting back to the round section and popping out). But for most people's use, I really doubt it matters. I would base the decision on what handguard you want. (I.e., some only come in one system or the other). View Quote This is impossible if the Keymod accessory is designed to spec. |
|
Mlok seems more secure and less easy to screw up to me. The Keymod fanboys are quick to defend every failure as either an out of spec part or an incorrect installation. However, I've not seen such issues even come up with Mlok.
|
|
|
I'm still trying to figure out why "quad" rails are now bad and these are now "good".
|
|
|
I just bought a middy MLok direct from Magpul. I think they look better.
|
|
I chose m-lok because I moved from MOE grips and already had m-lok. Key mod bothers me from an appearance stand point because of the penis shape.
|
|
M-Lok.
The flexibility in mounting at different lengths is good for fine-tuning how far away you mount rail accessories. |
|
I like keymod. Easy, light, durable, comfortable...and I went with SLR Rifleworks
|
|
I went with mlok. I think it has greater staying power than keymod due to Magpul's backing. Yep, I know KAC, BCM, and Noveske are keymod, but Magpul's become an industry goliath.
|
|
I have a couple Keymod handguards and one M-LOK. To me, it is just personal preference. There are several accessories out for each platform. If you are going just on looks alone, the M-LOK platform is cleaner looking.
|
|
Quoted:
Key mod bothers me from an appearance stand point because of the penis shape. View Quote I'm surprised it took as long as it did in this thread for someone to mention this. Lol Real talk though. I prefer Keymod over MLOK and let me tell you why. I have a rifle with a Keymod handguard. That's about it. The guys that designed it (at BCM if I am not mistaken) and the designers at Magpul (innovators if there ever was any) are smart enough not to make stupid stuff that doesn't work for crap. Both will work, both will save you weight, both with prove to be durable, reliable, and will work for as long as you take care of them as with anything. Use which one you like best. |
|
Keymod left a bad taste in my mouth after an IWC sling mount kept coming loose from a BCM KMR a couple years ago. I'm not sure if something was out of spec or what but after having my rifle hit the ground after the properly torqued and thread locked sling mount came off I was done with Keymod. I'm not knocking BCM or IWC, I'm just stating my experience.
|
|
Quoted:
I went with mlok. I think it has greater staying power than keymod due to Magpul's backing. Yep, I know KAC, BCM, and Noveske are keymod, but Magpul's become an industry goliath. View Quote KAC has switched over to M-LOK (at SHOT, they didn't even show Keymod in their MIL/LE conference room), and Noveske offers an M-LOK hand guard as well. As you can tell my the avatar, I'm obviously biased as to which system I prefer. I think the marked increase in M-LOK adoptions by professional users will speak for itself in the near future. I really like the BCM hand guard's profile and attachment system and would love to see it in M-LOK in the future. One can hope... |
|
This has been done alot. Pure preference. I've owned both and as long as your using quality parts you won't have issues with either. It's mostly personal preference. I prefer keymod. Never had anything come loose on either option and I've tried on purpose to make sure they were solid
|
|
|
The proper answer is get both! lol
Seriously though, they both work great and it it nice to not have all that extra wasted rail and weight of a quad rail. Really just depends on which look you like better. I have one of each style and havent had problems with either. I do think M lok will prob take over market share due to Magpul's backing. |
|
|
|
|
I prefer to use BCM accessories so Keymod was the path I chose.
|
|
I don't like warehouse shelving slots on my guns. They also look like a part of the male anatomy. Both make it look tacky so I stay away. And I really like M-LOK mounts as they seem just as good as a 1913. If someone else likes keymod, good for them. It still doesn't mean I should be forced to like what they like.
Keymod has kept me from purchasing the Sig MPX, Ruger RPR, and the CMMG Mk47 Mutant. Oh well. |
|
i really want a BCM KMR.
BBut Im not a fan of keymod. Right now I have 2 mlok rails (aero 308, Geissele MK4) and one Keymod (seekins MCSR) |
|
I have both, but prefer m-lok. I like the looks both seem to lock things up fine.
|
|
Since I'm an old "get off my lawn" person I haven't rushed out to change all my rails, and I don't foresee me doing it in the future.
|
|
I went keymod because I wanted the lightweight of the KMR so i could get a heavier barrel and still have a balanced rifle. I'm happy with my choice and have not had any problems with mounts or panels.
|
|
You can pry my KAC URX 2 rail from my cold dead hands
Although of the two, I'd prefer M lok based on aesthetics. They both supposedly function equally well, so I guess that's all it boils down to. I saw the Smos GFY M lok rail recently and it looks pretty sweet, and for 150 bucks I may pick one up and give one of these new fangled modular things a try. That or one of the URX 4's in M lok. |
|
I have several of both. I like the "idea" of MLOK better than the actual execution. Also, no one makes a half-assed decent set of MLOK covers that don't cost an arm and leg, IMO. The BCM keymod covers are perfection...
Buy what suits you. There is no shortage of quality offerings for both designs, including rails and accessories. |
|
The best solution might be "none of the above". Full cheese grater quad rail is bulky and has slots everywhere that no one will use. Yet, 1913 remains universal, effective and requires no special purchases or risk of trendy obsolescence. KeyMod and MLok are variations on a theme.
Ultimately, the ability to put a few accessories only where needed while leaving the remainder of the hand guard slim and smooth is a big improvement over cheese grater. Why not keep the tried and true 1913 but place securely fastened 3" mini 1913 rail strips only where needed, even at 45 degrees? The method of attachment is secondary, as long as they are secure. The accessory remains 1913 compliant, so nothing to buy or replace. Several manufacturers did this before the KeyMod and MLok fads, but gave way to the novelty to meet the artificially created demand for something new. New is always better, right? Humm. One good example was Daniel Defense's Modular Float Rail (MFR). I have one and still think its pure 1913 attachment is the best approach. I expect that people are mostly mounting their 1913 accessories in a similar manner, anyway and not buying very much direct KeyMod or MLok acessories, anyway. That will probably run its course. |
|
Quoted:
The best solution might be "none of the above". Full cheese grater quad rail is bulky and has slots everywhere that no one will use. Yet, 1913 remains universal, effective and requires no special purchases or risk of trendy obsolescence. KeyMod and MLok are variations on a theme. Ultimately, the ability to put a few accessories only where needed while leaving the remainder of the hand guard slim and smooth is a big improvement over cheese grater. Why not keep the tried and true 1913 but place securely fastened 3" mini 1913 rail strips only where needed, even at 45 degrees? The method of attachment is secondary, as long as they are secure. The accessory remains 1913 compliant, so nothing to buy or replace. Several manufacturers did this before the KeyMod and MLok fads, but gave way to the novelty to meet the artificially created demand for something new. New is always better, right? Humm. One good example was Daniel Defense's Modular Float Rail (MFR). I have one and still think its pure 1913 attachment is the best approach. I expect that people are mostly mounting their 1913 accessories in a similar manner, anyway and not buying very much direct KeyMod or MLok acessories, anyway. That will probably run its course. View Quote |
|
M-LOK.
Why? My Keymod attachments would loosen up. I know I will get these responses: Not enough torque Out of spec No loctite Bad attachment It was a strike industries rail, MI attachment, blue loctite. Loosened up several times as I have seen happen to others. M-LOK is nearly bombproof. |
|
I went with M Lok for my first non-quad rail. Partially because I didn't want tactical dicks and partially because of the slick side. But holy crap does it take a while to put a bunch of M Lok rail accessories on.
|
|
|
Got both, use both, like both. No real difference beyond brand loyalty I think. Neither is really easier to use than the other from my experience, and neither seems more "sturdy". I did lose a backing nut to a mlok vfg at the range, but I blame that on me not paying attention when installing it. Ill probably start drifting more towards keymod since I have more accessories at this point and I have moved past Magpul vfg's and found better alternatives.
|
|
I like M-Lok because of the sleeker look and ease of installation. The QD Mlok slots also make it very appealing.
At this point it's a toss up, but I think the Mlok will pull ahead. I believe it's really BCM and the KMR keeping it alive. If they both came out at the same time, I have no doubt keymod would not exist today. That's not to say it's bad. |
|
Quoted:
I like M-Lok because of the sleeker look and ease of installation. The QD Mlok slots also make it very appealing. At this point it's a toss up, but I think the Mlok will pull ahead. I believe it's really BCM and the KMR keeping it alive. If they both came out at the same time, I have no doubt keymod would not exist today. That's not to say it's bad. View Quote |
|
I prefer MLOK. To me it looks cleaner the the keymod system.
Overall both are better then quads, imo. The rail diameter and weight is reduced... either keymod or MLOK is a good options for those who don't need any or a few accessories. |
|
Quoted:
I went with M Lok for my first non-quad rail. Partially because I didn't want tactical dicks and partially because of the slick side. But holy crap does it take a while to put a bunch of M Lok rail accessories on. View Quote My trick is to screw the t nut all the way down before inserting it, then put it in and turn counter clockwise until it slips past the inner wall. Then it's just a quarter turn to lockdown. After that it's just a short turn on and off. |
|
Quoted:
A KMR in M-LOK would see my money. It's the only way I would own one. View Quote View All Quotes View All Quotes Quoted:
Quoted:
I like M-Lok because of the sleeker look and ease of installation. The QD Mlok slots also make it very appealing. At this point it's a toss up, but I think the Mlok will pull ahead. I believe it's really BCM and the KMR keeping it alive. If they both came out at the same time, I have no doubt keymod would not exist today. That's not to say it's bad. I liked everything about my KMR except the keymod. Too bad BCM will never offer it in M-Lok. |
|
There are reports from some door-kicking folks (no I'm not going to get into who told me) that KeyMod has two general problems:
1. It is not that difficult to pop your gear loose if you catch a door frame or other solid object with your hand guard. That can be a problem if it happens to be your light / IR illuminator / laser. 2. If you bang into something that hard, it is also possible to bend the lips of the "key" upward. Doing that causes you to lose the utility of that hunk of rail. For most of us, the difference is pretty negligible. I happen to fancy ALG Defense |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.