User Panel
Posted: 5/11/2024 2:51:14 PM EDT
picked up a bunch of gun/reloading stuff from a family friend’s late uncle’s estate.
There’s around 45lbs of commercial cast pistol bullets I’d like to re-cast for fire forming brass and plinking for the 7-30 waters TC contender I got out of it. I don’t know jack about casting. I read about boiling the lube off the bullets before melting, and then see stuff about sizing, lubing, powder coating, gas check, etc. For fire forming brass, do I need to do any of that stuff or is just shooting the raw lead I re-cast ok?? |
|
|
Global Warming Hoax Skeptic before it was cool
WA, USA
|
Are the bullets you have lubed?
|
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
Pretty sure they are
|
|
|
Fireforming brass you will be dollars ahead selling what you have and buying what you need.
|
|
|
I would if 7-30 waters brass was available. The lot of stuff I got included 20k primers and 10-15lbs of various powders for next to nothing, so I am still way ahead
|
|
|
no need to remove lube. it will act as a flux to help clean up the lead. Just make sure to do it outside. Once the lead is hot enough lite the smoke on fire to get rid of the smoke and to create a o2 free area to reduce and contaminates.
Then cast what you need |
|
|
Originally Posted By Shlouf: I would if 7-30 waters brass was available. The lot of stuff I got included 20k primers and 10-15lbs of various powders for next to nothing, so I am still way ahead View Quote What I mean is it will be cheaper to sell the cast bullets you have and buy 7mm commercial cast bullets sufficient to fire form the brass you want than to buy a complete bare bones casting set up to make your own. Now if you would plan to continue to shoot cast after the initial fire form, then the casting equipment will amortize. |
|
|
Global Warming Hoax Skeptic before it was cool
WA, USA
|
I convert 30-30 brass to 7-30 Waters.
If you don't want to lose cases to neck cracks, anneal before running 30-30 case into the 7-30 Waters size die to form. When you fire form, that when the cracks appear on un annealed cases. I haunt the funshows and buy up partial boxes of 7mm jacketed bullets. Used everything from 110 grs to 175 gr bullets (all jacketed) I got good accuracy with Hornady 139 gr Spirt Point bullets with case forming loads. For fire forming loads I use up partial cans of powder and load the "start" load for a fire forming load. For what you will spend for a casting furnace, mold, sizing die, lube, you will be money ahead just buying some 7mm jacketed bullets. Also your lack of casting experience also points to you buying jacketed bullets. I'm shooting these loads in a 10 inch Contender barrel, and just added a rifle barrel in 7-30 Waters. |
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
Originally Posted By bigdb1: What I mean is it will be cheaper to sell the cast bullets you have and buy 7mm commercial cast bullets sufficient to fire form the brass you want than to buy a complete bare bones casting set up to make your own. Now if you would plan to continue to shoot cast after the initial fire form, then the casting equipment will amortize. View Quote I gotcha. I could definitely see myself getting into casting long term. The lot of stuff I got came with a nib Lee casting furnace as well. I’m at like $75 now for a cheap lee mold, sizing die, and some lube. I’ve definitely spent way more on projects that didn’t pan out before. |
|
|
Originally Posted By dryflash3: I convert 30-30 brass to 7-30 Waters. If you don't want to lose cases to neck cracks, anneal before running 30-30 case into the 7-30 Waters size die to form. When you fire form, that when the cracks appear on un annealed cases. I haunt the funshows and buy up partial boxes of 7mm jacketed bullets. Used everything from 110 grs to 175 gr bullets (all jacketed) I got good accuracy with Hornady 139 gr Spirt Point bullets with case forming loads. For fire forming loads I use up partial cans of powder and load the "start" load for a fire forming load. For what you will spend for a casting furnace, mold, sizing die, lube, you will be money ahead just buying some 7mm jacketed bullets. Also your lack of casting experience also points to you buying jacketed bullets. I'm shooting these loads in a 10 inch Contender barrel, and just added a rifle barrel in 7-30 Waters. View Quote On the contender, how far off the lands are you loading? The only 7mm I had on hand was some 139 SST and accuracy wasn’t great |
|
|
Global Warming Hoax Skeptic before it was cool
WA, USA
|
|
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
I fire-form and load 7-30 Waters for a Super 14 Contender.
If you use lead bullets, you will need to either gas check them or powder coat, both of which add cost. You already have a furnace and raw materials, so now you need a sizer die (Lee) and molds and, most importantly, the Lyman Cast Bullet Handbook. Get it and read it before melting the first bit of lead. Regarding fire-forming: Annealing is your brass' friend. I set the length to just touch the lands to ensure I get firm seating and a full forming. No need to suffer a lotta recoil- use a starting load of whatever appropriate powder for available bullet. |
|
<placeholder for something good in the future>
|
Global Warming Hoax Skeptic before it was cool
WA, USA
|
Annealing doesn't take an expensive machine.
How I anneal using common tools and Templaq. https://www.ar15.com/forums/armory/Low-budget-Annealing/42-439440/ |
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
I use a buddy's induction annealer and do a sackful at a time.
Might try templac some day but so far how I do it has worked. |
|
<placeholder for something good in the future>
|
Global Warming Hoax Skeptic before it was cool
WA, USA
|
|
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
<placeholder for something good in the future>
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.