I have a 457 Varmint that was fantastic out of the box. After dropping in a Timney and putting it in a KRG stock it has become one of my favorite rifles.
Also, while CZ uses Turkish walnut, the rifles themselves are made in the Czech Republic.
I prefer the 457 myself. Adjustable trigger that can be dropped to under a pound pull with a little spring change. Swap to 17HMR, 22mag or 22LR with a simple barrel and mag change. Second only to the 10/22 for available goodies in the aftermarket. Mine have begun to multiply in the safe.
How long is that barrel? I have a 455 UL with a 28.5" barrel too. Do not shoot 60 grain subs since it won't make it down the bore. Only thing I don't like about it is the tapered barrel is to thin to thread unless you shorten it.
Experience is what you get right after you need it.
Originally Posted By CplRick: The line of credit on the Race Card is maxed out, sorry.
Not really. The Jaguar 457 has the exact same barrel profile and it's threaded at the muzzle. You can even switch out your barrel for the Jag barrels if you find one for sale.
How long is that barrel? I have a 455 UL with a 28.5" barrel too. Do not shoot 60 grain subs since it won't make it down the bore. Only thing I don't like about it is the tapered barrel is to thin to thread unless you shorten it.
View Quote
Originally Posted By tuckybill: Not really. The Jaguar 457 has the exact same barrel profile and it's threaded at the muzzle. You can even switch out your barrel for the Jag barrels if you find one for sale.
View Quote
This has the 20” barrel
Crap.
“Finally, be strong in the Lord and in his mighty power. Put on the full armor of God, so that you can take your stand against the devil's schemes.”
Originally Posted By 3-gun: Got my sons the original cz scout rifle. Far more accurate than you think. Good ammo and a decent scope and you will get a ragged hole. They use a 12mm scope rail so you want cz rimfire specific rings.
They are 11mm
My bad, 11mm. Still need cz rings.
" Don't cry, nobody shoots Glocks anymore."
"But the new Admin. is a Master in IDPA" "MASTER in IDPA..."
Originally Posted By 3-gun: Got my sons the original cz scout rifle. Far more accurate than you think. Good ammo and a decent scope and you will get a ragged hole. They use a 12mm scope rail so you want cz rimfire specific rings.
They are 11mm
My bad, 11mm. Still need cz rings.
Put a picatinny rail on it then use whatever rings you want. Cz has factory ones.