User Panel
User Panel
User Panel
|
Posted: 8/15/2013 12:00:05 AM EDT
[Last Edit: mattdomes]
[#1]
300BLK pistol / eventually a SBR Build. Lott of Rainier Arms parts on this one!
Rainier 10.5" Match 300BLK barrel Fortis REV 9" rail Noveske Gen2 Lower Phase 5 pistol buffer tube ALG "ACT" Trigger |
|
|
|
|
Posted: 8/27/2013 1:51:48 PM EDT
[#2]
This is the final configuration for my CMT. Had the Fortis on it, but, I like the NSR a lot more. Just more ergonomic. Going to be using this as my primary plinker, so comfort is key. CMT Lower POF trigger Seekins bolt catch and mag release CMT Upper Daniel Defense barrel Noveske NSR Battlecomp 1.5" Troy front and rear folding sights, soon to be replaced with anything but troy... Or maybe just file the Troy name off. The upper is beautiful, but I had a bitch of a time getting the forward assist assembled. Tight. Everything except the stock, barrel and trigger are from Rainier. I think I got the battlecomp from the ee. Thanks guys. Not going to put an optic on it. Great shooter. |
|
|
|
|
Posted: 8/28/2013 11:11:58 PM EDT
[#3]
Quote HistoryOriginally Posted By samboard:
As always, beautiful build. 
|
|
|
|
|
Posted: 9/1/2013 12:49:07 AM EDT
[#4]
|
|
|
|
|
Posted: 9/14/2013 4:06:52 PM EDT
[#5]
|
|
|
|
|
Posted: 9/16/2013 7:57:05 AM EDT
[#6]
I'm going to have to get me one of them there Rainier lowers... Damnit.
Sam |
|
|
|
|
Posted: 9/17/2013 2:47:19 AM EDT
[Last Edit: NewCo32]
[#7]
Ya'll don't mind if I leave this one here for a while do ya? All parts were ordered through Rainier except for the Noveske Pmags, LPK, scope and mount.
I'm no "Stickman" photographer. So I won't even ask forgiveness on this one. But you guys get the idea. Here are the specs: UPPER: CMT Billet Upper (stripped) Rainier upper parts kit Centurion Arms 16" LW barrel Fortis low profile gas block Rainier gas tube Fortis RED muzzle brake Noveske NSR 15" Rainier Raptor charging handle Rainier phosphate BCG LOWER: CMT Billet Lower (stripped) CMMG LPK Umbrella Corp grip Noveske take down pins B5 SOPMOD bravo stock Rainier stock kit OPTICS: Vortex Viper PST Mrad 1-4x24 Butler Creek pop up lens covers Aero Precision scope mount Cerakote is "Tungsten Grey" by Timberwolf in Oregon. Timberwolf will be doing better pics of my rifle this weekend when they finish my Wife's rifle but I couldn't wait to post mine from my kitchen. I know, I lost a few cool points. Roses were for dramatic effect. Enjoy. |
|
|
|
WA, USA
|
Posted: 9/19/2013 5:12:30 PM EDT
[#8]
My new 18" Rainier Match Coyote gun.
Bought most of the parts from Rainier arms and fully assembled by Rainier arms. Looks great. Thanks guys. http://img.photobucket.com/albums/v411/truck1/tan3_zps4e902089.jpg http://img.photobucket.com/albums/v411/truck1/tan2_zpsc7bb1be6.jpg http://img.photobucket.com/albums/v411/truck1/tan1_zpscf263f97.jpg |
|
|
WA, USA
|
Posted: 9/22/2013 6:43:09 PM EDT
[#9]
I need a better camera.... |
|
|
|
Posted: 9/23/2013 11:02:50 PM EDT
[#10]
Quote HistoryOriginally Posted By NewCo32:
|
|
|
|
|
Posted: 10/11/2013 10:39:08 AM EDT
[Last Edit: ArmedFerret]
[#11]
|
|
|
|
|
Posted: 10/12/2013 4:10:32 PM EDT
[#12]
Quote HistoryOriginally Posted By ArmedFerret:
18" medcon, seekins V2, viper pst all came from rainier: [email=mailto:http://www.flickr.com/photos/80587766@N07/10091333044/]http://farm8.staticflickr.com/7377/10091333044_ca6960ce1e_c.jpg[/email] IMG_0390 by Armed Ferret, on Flickr Nice pic and stick! |
|
|
|
|
Posted: 10/12/2013 5:02:53 PM EDT
[#13]
Here are my two. Almost everything is from you guys, minus the scopes. I think you guys should consider carrying Leupolds
IMG_3877 by Will816, on Flickr 
IMG_3879 by Will816, on Flickr 
IMG_3880 by Will816, on Flickr 
IMG_3881 by Will816, on Flickr 
IMG_3885 by Will816, on Flickr 
IMG_3883 by Will816, on Flickr 
IMG_3884 by Will816, on Flickr |
|
|
|
|
Posted: 10/13/2013 12:55:34 AM EDT
[#14]
Quote HistoryOriginally Posted By Will816:
Here are my two. Almost everything is from you guys, minus the scopes. I think you guys should consider carrying Leupolds
[email=http://www.flickr.com/photos/46381179@N04/10232790405/]http://farm3.staticflickr.com/2874/10232790405_299ba9922d_c.jpg[/email] IMG_3877 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232898903/]http://farm4.staticflickr.com/3757/10232898903_77aca52645_c.jpg[/email] IMG_3879 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232830155/]http://farm4.staticflickr.com/3800/10232830155_8808cfea03_c.jpg[/email] IMG_3880 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232855356/]http://farm6.staticflickr.com/5456/10232855356_47eaba2af4_c.jpg[/email] IMG_3881 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232922436/]http://farm8.staticflickr.com/7343/10232922436_157ae10417_c.jpg[/email] IMG_3885 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232876736/]http://farm6.staticflickr.com/5512/10232876736_fb9f6d4ecd_c.jpg[/email] IMG_3883 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232980583/]http://farm9.staticflickr.com/8254/10232980583_b6c4628757_c.jpg[/email] IMG_3884 by Will816, on Flickr How do you put those #s on your mags? |
|
|
|
|
Posted: 10/13/2013 1:33:43 AM EDT
[#15]
Quote HistoryOriginally Posted By cjwwd2:
How do you put those #s on your mags? Quote HistoryOriginally Posted By cjwwd2:
Originally Posted By Will816:
Here are my two. Almost everything is from you guys, minus the scopes. I think you guys should consider carrying Leupolds
[email=http://www.flickr.com/photos/46381179@N04/10232790405/]http://farm3.staticflickr.com/2874/10232790405_299ba9922d_c.jpg[/email] IMG_3877 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232898903/]http://farm4.staticflickr.com/3757/10232898903_77aca52645_c.jpg[/email] IMG_3879 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232830155/]http://farm4.staticflickr.com/3800/10232830155_8808cfea03_c.jpg[/email] IMG_3880 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232855356/]http://farm6.staticflickr.com/5456/10232855356_47eaba2af4_c.jpg[/email] IMG_3881 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232922436/]http://farm8.staticflickr.com/7343/10232922436_157ae10417_c.jpg[/email] IMG_3885 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232876736/]http://farm6.staticflickr.com/5512/10232876736_fb9f6d4ecd_c.jpg[/email] IMG_3883 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232980583/]http://farm9.staticflickr.com/8254/10232980583_b6c4628757_c.jpg[/email] IMG_3884 by Will816, on Flickr How do you put those #s on your mags? A white paint pen. There's a numbering matrix down there on the bottom of the new Gen 3 PMAGs |
|
|
|
|
Posted: 10/24/2013 9:39:48 PM EDT
[#16]
My new 300 Blackout deer blaster. Rainier 10.5" match barrel, Raptor CH and XTC. Plus some other bits and pieces acquired from Rainier. Can't wait to take it out.
 |
|
|
|
|
Posted: 10/25/2013 3:48:02 AM EDT
[#17]
Quote HistoryOriginally Posted By Will816:
Here are my two. Almost everything is from you guys, minus the scopes. I think you guys should consider carrying Leupolds
[email=http://www.flickr.com/photos/46381179@N04/10232790405/]http://farm3.staticflickr.com/2874/10232790405_299ba9922d_c.jpg[/email] IMG_3877 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232898903/]http://farm4.staticflickr.com/3757/10232898903_77aca52645_c.jpg[/email] IMG_3879 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232830155/]http://farm4.staticflickr.com/3800/10232830155_8808cfea03_c.jpg[/email] IMG_3880 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232855356/]http://farm6.staticflickr.com/5456/10232855356_47eaba2af4_c.jpg[/email] IMG_3881 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232922436/]http://farm8.staticflickr.com/7343/10232922436_157ae10417_c.jpg[/email] IMG_3885 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232876736/]http://farm6.staticflickr.com/5512/10232876736_fb9f6d4ecd_c.jpg[/email] IMG_3883 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232980583/]http://farm9.staticflickr.com/8254/10232980583_b6c4628757_c.jpg[/email] IMG_3884 by Will816, on Flickr I just went from 6 to midnight. Well played. |
|
|
|
|
Posted: 11/4/2013 7:27:53 PM EDT
[#18]
Still have to figure out what optic to put on it, so just teaser pics for now
|
|
|
|
|
Posted: 11/8/2013 7:00:32 PM EDT
[#19]
*In progress*
|
|
|
|
|
Posted: 11/14/2013 7:34:18 PM EDT
[#20]
Quote HistoryOriginally Posted By Will816:
Here are my two. Almost everything is from you guys, minus the scopes. I think you guys should consider carrying Leupolds
[email=http://www.flickr.com/photos/46381179@N04/10232790405/]http://farm3.staticflickr.com/2874/10232790405_299ba9922d_c.jpg[/email] IMG_3877 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232898903/]http://farm4.staticflickr.com/3757/10232898903_77aca52645_c.jpg[/email] IMG_3879 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232830155/]http://farm4.staticflickr.com/3800/10232830155_8808cfea03_c.jpg[/email] IMG_3880 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232855356/]http://farm6.staticflickr.com/5456/10232855356_47eaba2af4_c.jpg[/email] IMG_3881 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232922436/]http://farm8.staticflickr.com/7343/10232922436_157ae10417_c.jpg[/email] IMG_3885 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232876736/]http://farm6.staticflickr.com/5512/10232876736_fb9f6d4ecd_c.jpg[/email] IMG_3883 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232980583/]http://farm9.staticflickr.com/8254/10232980583_b6c4628757_c.jpg[/email] IMG_3884 by Will816, on Flickr How is your bipod mounted on your NSR? I tried a NSR 2" keynote rail section with a YHM bipod rail adapter but it's pretty clunky. Yours looks much lower profile. |
|
|
|
|
Posted: 11/14/2013 7:44:26 PM EDT
[#21]
Quote HistoryOriginally Posted By jclaypool:
How is your bipod mounted on your NSR? I tried a NSR 2" keynote rail section with a YHM bipod rail adapter but it's pretty clunky. Yours looks much lower profile. Primary Weapons makes a keymod bipod adapter. It's a keymod section that just has a sling stud to attach a Harris-style bipod. |
|
|
|
|
Posted: 11/14/2013 9:12:19 PM EDT
[#22]
Quote HistoryOriginally Posted By ArmedFerret:
Primary Weapons makes a keymod bipod adapter. It's a keymod section that just has a sling stud to attach a Harris-style bipod. Quote HistoryOriginally Posted By ArmedFerret:
Originally Posted By jclaypool:
How is your bipod mounted on your NSR? I tried a NSR 2" keynote rail section with a YHM bipod rail adapter but it's pretty clunky. Yours looks much lower profile. Primary Weapons makes a keymod bipod adapter. It's a keymod section that just has a sling stud to attach a Harris-style bipod. Thanks! Now to contribute.... Some parts, but not all were obtained from Rainier. I will say, the lifeblood of the gun is ALL Rainier, being the barrel and BCG. I had problems with the original BCG and swapped out for this NiB Rainier BCG when they were on sale. It has worked great! The NSR, and PRI gas buster were also Rainier purchases. The rifle isn't done yet. There is some fine tuning to be done, but I'm happy with how its turning out. Now all I need is a Rainier sticker/swag so I can let everyone know where I got these great parts. 
|
|
|
|
|
Posted: 11/16/2013 6:12:32 PM EDT
[#23]
forgive the phone photo.
snagged the pinning jig and properly secured my 18" medcon (photo earlier on this page). 
|
|
|
|
WA, USA
|
Posted: 11/17/2013 8:39:04 PM EDT
[Last Edit: 0331OC]
[#24]
My Northtech Defense Billet Lower:
https://lh3.googleusercontent.com/-bqeqmUqdaxw/Uolrwg_n5_I/AAAAAAAAA7E/2Ooof37Dhuk/s940/_DSC0169.jpg |
|
|
|
Posted: 11/18/2013 11:24:08 PM EDT
[#25]
Quote HistoryOriginally Posted By 0331OC:
My Northtech Defense Billet Lower: https://lh3.googleusercontent.com/-bqeqmUqdaxw/Uolrwg_n5_I/AAAAAAAAA7E/2Ooof37Dhuk/s940/_DSC0169.jpg Nice perspective.
|
|
|
|
|
Posted: 11/21/2013 6:07:20 PM EDT
[#26]
Quote HistoryOriginally Posted By jclaypool:
How is your bipod mounted on your NSR? I tried a NSR 2" keynote rail section with a YHM bipod rail adapter but it's pretty clunky. Yours looks much lower profile. Quote HistoryOriginally Posted By jclaypool:
Originally Posted By Will816:
Here are my two. Almost everything is from you guys, minus the scopes. I think you guys should consider carrying Leupolds
[email=http://www.flickr.com/photos/46381179@N04/10232790405/]http://farm3.staticflickr.com/2874/10232790405_299ba9922d_c.jpg[/email] IMG_3877 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232898903/]http://farm4.staticflickr.com/3757/10232898903_77aca52645_c.jpg[/email] IMG_3879 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232830155/]http://farm4.staticflickr.com/3800/10232830155_8808cfea03_c.jpg[/email] IMG_3880 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232855356/]http://farm6.staticflickr.com/5456/10232855356_47eaba2af4_c.jpg[/email] IMG_3881 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232922436/]http://farm8.staticflickr.com/7343/10232922436_157ae10417_c.jpg[/email] IMG_3885 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232876736/]http://farm6.staticflickr.com/5512/10232876736_fb9f6d4ecd_c.jpg[/email] IMG_3883 by Will816, on Flickr [email=http://www.flickr.com/photos/46381179@N04/10232980583/]http://farm9.staticflickr.com/8254/10232980583_b6c4628757_c.jpg[/email] IMG_3884 by Will816, on Flickr How is your bipod mounted on your NSR? I tried a NSR 2" keynote rail section with a YHM bipod rail adapter but it's pretty clunky. Yours looks much lower profile. I forget where I picked the mount up but I believe it's designed for the standard hand guards. It's just a stud with a little backer plate that goes inside the hand guard and then you screw the stud through a hand guard hole into the plate. I tried it on the NSR and it worked perfectly. |
|
|
|
WA, USA
|
Posted: 12/12/2013 2:09:47 AM EDT
[#27]
Built with a Rainier 10.5 Select barrel.
|
|
|
|
Posted: 12/12/2013 11:38:17 PM EDT
[#28]
Quote HistoryOriginally Posted By Hahns10mm:
Built with a Rainier 10.5 Select barrel. http://i.imgur.com/HsPTrgk.jpg Nice!
|
|
|
|
WA, USA
|
Posted: 12/14/2013 10:05:24 PM EDT
[#29]
Old purchase/new pic
Just cleaned her up and thought I'd snap a quick pic. 
|
|
|
|
Posted: 12/15/2013 9:00:01 PM EDT
[#30]
Quote HistoryOriginally Posted By EB_311:
Old purchase/new pic Just cleaned her up and thought I'd snap a quick pic. http://farm6.staticflickr.com/5510/11377005784_1ec36857a7_c.jpg Nice stick and bench! Both are immaculate!
|
|
|
|
|
Posted: 12/24/2013 10:57:54 AM EDT
[#31]
14.5 RA upper
|
|
|
|
IA, USA
|
Posted: 12/25/2013 10:11:34 PM EDT
[#32]
Posted this one before but there have been changes. 20" Rainier UM barrel, Young Mfg. match sidecharger BCG, Mega side charging upper, Seekins lower, Geissele Hi-Speed, Vltor A5 system inside of a Magpul ACS stock, JP tube, GG&G bipod, LaRue SPR-S mount, Bushnell "Elite DMR" 3.5-21x50 FFP optic. Been wanting to Cerakote this one real bad, but I haven't settled on a configuration yet.
|
|
|
|
Posted: 12/26/2013 2:15:24 PM EDT
[#33]
|
|
|
|
KY, USA
|
Posted: 12/27/2013 7:44:02 PM EDT
[#34]
Noveske.
Sorry for crappy edited iphone pix. :). Finished it today. Put 220 .223 down barrel and 212 .22lr. By far the best AR I have ever owned in -all- aspects. Build Specs: Ranier Arms RUC upper Rainier Barrel 14.5 in1:7 twist MP/ HP pencil barrel profile, cold hammer forged Samson rail 12.37. Free float rail Pinned. AAC 51 t brake Noveske Chainsaw gen 1 lower KAC trigger guard. BCM GF grip. Noveske takedown pins. KAC rear sight. Noveske troy front sight AIM nickel boron BCG. Magpul handstop kit. Rock River Arms Entry Stock PA. 3x compact illuminated scope Overall length a hair over 30 inches 
|
|
|
|
Posted: 12/31/2013 2:04:37 PM EDT
[#35]
Quote HistoryOriginally Posted By Coachf:
Noveske. Sorry for crappy edited iphone pix. :). Finished it today. Put 220 .223 down barrel and 212 .22lr. By far the best AR I have ever owned in -all- aspects. Build Specs: Ranier Arms RUC upper Rainier Barrel 14.5 in1:7 twist MP/ HP pencil barrel profile, cold hammer forged Samson rail 12.37. Free float rail Pinned. AAC 51 t brake Noveske Chainsaw gen 1 lower KAC trigger guard. BCM GF grip. Noveske takedown pins. KAC rear sight. Noveske troy front sight AIM nickel boron BCG. Magpul handstop kit. Rock River Arms Entry Stock PA. 3x compact illuminated scope
Damn Nice! Looks fun. |
|
|
|
OK, USA
|
Posted: 1/2/2014 6:27:07 AM EDT
[#36]
Here are my two builds the SBR was done a few years ago I carry it at work. The SPR is my recent build that I just finished still waiting on the Bushnell 1-4x24 scope.
SBR Mega upper and lower Rainier Arms thunder bolt Daniel Defense 11.5 barrel BCM charging handle med. Centurion cutout rail LWRCI parts kit Magpul MIAD grip and CTR stock Troy claymore Eotech 512 A.R.M.S. sights Stream light TLR-1s Savvy sniper sling SPR Rainer Arms upper and lower Rainier Arms bolt Wilson Arms 18inch heavy stainless barrel Rainier arms Raptor charging handle PSA parts kit RRA 2 stage trigger PWS TTO comp. Magpul MOE grip and ACR stock Troy Alpha Rail Bushnell 1-4x24 scope  " />
|
|
|
TX, USA
|
Posted: 1/4/2014 12:56:41 AM EDT
[#37]
http://i43.tinypic.com/2yuepuv.jpg
thank you #basedrainierarms north tech upper mega ambi billet lower fortis 12" REV fortis foregrip Mbus pro's K2+ grip 12" FN barrel lantac dragon muzzle brake primary arms mini red dot |
|
|
PA, USA
|
Posted: 1/8/2014 9:54:10 AM EDT
[Last Edit: titanse05]
[#38]
|
|
|
|
Posted: 1/8/2014 11:23:34 PM EDT
[#39]
Quote HistoryOriginally Posted By titanse05:
http://i230.photobucket.com/albums/ee318/titanse05/2014-01-03173421_zps3938deb1.png Now that is cool! Matching window sticker and rifle!
|
|
|
|
CT, USA
|
Posted: 2/1/2014 9:52:16 PM EDT
[Last Edit: LapuaVarget175SMKBR2]
[#40]
When I move to a free state I'll put it on a matching Rainier lower...
RA ultramatch upper receiver RA 16" ultramatch barrel med gunfighter CH jp bolt Geissele mk4 rail Seekins adjustable gas block 
|
|
|
|
Posted: 2/6/2014 12:08:56 AM EDT
[#41]
Upper I built with 90% of the parts bought from Rainier:
And the patch was a nice bonus.
|
|
|
|
WA, USA
|
Posted: 2/6/2014 1:30:41 AM EDT
[#42]
just a couple builds
|
|
|
CA, USA
|
Posted: 2/8/2014 12:16:28 AM EDT
[#43]
Rainier 14.5" UltraMatch:
They built the upper for me too. Couldn't be happier with it! |
|
|
IN, USA
|
Posted: 2/15/2014 1:38:12 PM EDT
[#44]
|
|
|
|
Posted: 2/16/2014 9:54:15 AM EDT
[Last Edit: Tango_6]
[#45]
Rainier 14.5 RUC, My pelican case with old rifle cut out...... I changed out the stock the B5 had a lot of play to it so I put a Magpul stock on it I dont think it changed the weight much.
|
|
|
|
|
Posted: 2/16/2014 1:51:59 PM EDT
[#46]
I don't usually post AR pics until I'm done, but have been working on this one for just over a year and I'm almost done. Waiting on Rainier to get short throw B.A.D. levers in stock so I can fit my old school JP trigger. Rainier upper, lower and barrel.
|
|
|
|
|
Posted: 2/18/2014 7:10:40 PM EDT
[#47]
It begins...
|
|
|
|
AL, USA
|
Posted: 3/29/2014 8:28:37 PM EDT
[#48]
Nearly everything on this rifle was ordered from Rainier. Still by far the best firearm supplies online dealer, bar none.
Specs: Upper: Vltor MUR1-A Lower: Seekins SP-223 with logo Lower parts kit: Spikes tactical Handguard: Geissele Super modular rail Mk4 Keymod in desert dirt Buffer assembly: Spikes mil spec buffer tube with ST-T2 H buffer Stock: Magpul ACS-L Trigger: Wilson Combat tactical trigger unit-3 gun Safety: Battle Arms Development ambi safety BCG: Rainier arms precision match grade coated in nickel boron Charging handle: Rainier Arms Raptor Pistol grip: BCM Mod 1 Iron Sights: Troy industries battle sights (HK front sight won't fit on rail with current set up, in the process of figuring out what I'll do about that) Optics: Trijicon ACOG TA-31F-G in Larue QD mount with Aimpoint Micro T-1 (2 MOA) in 45 degree offset Larue QD mount Weapon light: Surefire m600c scout light (200 lumens) in Larue offset QD mount with S207 rail mounted pressure switch Muzzle brake: Surefire SFMB 556 SOCOM Gas block: Rainier Arms low profile Barrel: Daniel Defense -Barrel Material: Chrome Moly Vanadium Steel Barrel Type: Cold Hammer Forged Barrel Caliber: 5.56 NATO Barrel Twist: 1:7 Barrel Length: 14.5" Barrel Profile: Gov't Profile Barrel Gas System: Mid-Length Gas Block: Pinned Low Profile  " />
 " />
 " />
 " />
 " />
 " />
 " />
 " />
 " />
 " />
|
|
|
SC, USA
|
Posted: 3/30/2014 2:56:18 PM EDT
[Last Edit: stimr2]
[#49]
Rainier Arms upper receiver
Palmetto State Armory lower receiver White Oak Armament 18" Mid SPR 1-7 .223 Wylde SS barrel BCM KMR 13" Rail Rainier Arms BCG Geissele SSA-E Griffin Armament M4SD Compensator Vortex Viper PST 2.5-10X32 FFP in a LaRue Tactical SPR LT104 
|
|
|
|
Posted: 4/1/2014 10:34:57 PM EDT
[#50]
Quote HistoryOriginally Posted By stimr2:
Nice! How does she shoot?
|
|
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
