User Panel
|
Originally Posted By Zone0ne: I’d say right now it’s going to be only the OSS/Hux QD flash hider as we are all supposed to running Flow 556ks. View Quote View All Quotes View All Quotes Originally Posted By Zone0ne: Originally Posted By Air_Soft_Contractor: What are the clone correct muzzle devices? I’d say right now it’s going to be only the OSS/Hux QD flash hider as we are all supposed to running Flow 556ks. Thanks. I was considering of those. I've got some A2's and crush washers I could throw on it, but I think I'll wait for the OSS 556 QD to arrive. Does that go on without any shims or washer at all? Is the standard Rocksett compound recommended? |
|
|
Originally Posted By Zone0ne: I’d say right now it’s going to be only the OSS/Hux QD flash hider as we are all supposed to running Flow 556ks. View Quote So from what I gathered, they were running the SF RC2 and now have the Flow 556k? I recently picked up the pre flow 556k which is the HX QD 556k, which is not 3d printed. Too good of a deal to pass up and offers more serviceability if ever needed but kinda in line with my clone. |
|
|
Originally Posted By Air_Soft_Contractor: Thanks. I was considering of those. I've got some A2's and crush washers I could throw on it, but I think I'll wait for the OSS 556 QD to arrive. Does that go on without any shims or washer at all? Is the standard Rocksett compound recommended? View Quote no shims needed; it isn't timed |
|
|
|
Originally Posted By RWA007: Might go actually shoot this again this weekend... https://i.imgur.com/hJ5SyZk.jpg https://i.imgur.com/kjJhAUu.jpg View Quote |
|
"Do you want to know who you are? Don't ask. Act! Action will delineate and define you." - Thomas Jefferson
VCDL Member Volunteer Firefighter/EMT and damn PROUD to be! : Arfcom Callsign "Bucket 2" |
Originally Posted By RWA007: Might go actually shoot this again this weekend... https://i.imgur.com/hJ5SyZk.jpg https://i.imgur.com/kjJhAUu.jpg View Quote What stock is that and how does it feel? |
|
|
It's the Hogue overmolded stock. I do have both an ODG and a Black CTR stock, but I like the look, the feel and the fitment better of this Hogue stock.
https://www.hogueinc.com/ar-15-m16-overmolded-collapsible-buttstock-fits-mil-spec-buffer-tube-od-green |
|
|
Originally Posted By ResponsibleSecond: So from what I gathered, they were running the SF RC2 and now have the Flow 556k? I recently picked up the pre flow 556k which is the HX QD 556k, which is not 3d printed. Too good of a deal to pass up and offers more serviceability if ever needed but kinda in line with my clone. View Quote Can't speak for HRT.... but for SWAT, they had A2 flash hiders and now run OSS/Hux QD flash hiders. I think the suppressor is going to dictate what they are running muzzle device wise, as everyone is running suppressed now. |
|
|
I’ve got a Mk4 fed rail inbound, excited to turn my 11.5 into an HRT inspired build. Also, in on 87
|
|
|
So FBI just awarded Aimpoint with a $7mil contract for the RDS, and $4mil for the CompM4S.
Hmmm... |
|
|
|
Originally Posted By ResponsibleSecond: I am guessing soon the RDS will be clone correct. I wonder if any units (HRT) will keep fielding the T2 or the sig. View Quote View All Quotes View All Quotes Originally Posted By ResponsibleSecond: Originally Posted By slowkota1: So FBI just awarded Aimpoint with a $7mil contract for the RDS, and $4mil for the CompM4S. Hmmm... I am guessing soon the RDS will be clone correct. I wonder if any units (HRT) will keep fielding the T2 or the sig. I bet HRT and Regional SWAT keep using the T2s and EXPS3s |
|
|
Duty RDS is good for me as mine will eventually make its way onto my clone. I’ve read quite a bit of this thread, and it’s been a good read. Has anyone made a list of the VFGs/hand stops that have been seen in the wild? I know the Magpul AFG Gen 1&2 have been seen, what else?
|
|
|
Originally Posted By bluedog82: Duty RDS is good for me as mine will eventually make its way onto my clone. I’ve read quite a bit of this thread, and it’s been a good read. Has anyone made a list of the VFGs/hand stops that have been seen in the wild? I know the Magpul AFG Gen 1&2 have been seen, what else? View Quote Magpul vertical grips. KAC Broomhandle The silly Fab defense angled one |
|
|
Originally Posted By slowkota1: I bet HRT and Regional SWAT keep using the T2s and EXPS3s View Quote View All Quotes View All Quotes Originally Posted By slowkota1: Originally Posted By ResponsibleSecond: Originally Posted By slowkota1: So FBI just awarded Aimpoint with a $7mil contract for the RDS, and $4mil for the CompM4S. Hmmm... I am guessing soon the RDS will be clone correct. I wonder if any units (HRT) will keep fielding the T2 or the sig. I bet HRT and Regional SWAT keep using the T2s and EXPS3s Yeah this BPA is probably for all of the line agents to order against, not to mention other agencies |
|
|
|
Originally Posted By ChrizzaiN: Wrapped up my Noveske clone-ish build. Haven't staked the castle nut yet because I may add a Law folder, but other than that, she's finished and I love her :) https://i.postimg.cc/d1ZX9t6x/20240122-134228-2.jpg https://i.postimg.cc/rwqBLTyD/20240122-133931-2.jpg View Quote From another FCD fan, you have great taste. |
|
|
|
Anyone do this in 14.5? In a non sbr state but would love to do this style build. Any recs on what muzzle device if I did do it?
|
|
|
The voices in my head say I’m just being paranoid
KY, USA
|
Originally Posted By RichieRich562: Anyone do this in 14.5? In a non sbr state but would love to do this style build. Any recs on what muzzle device if I did do it? View Quote At that point it’s not a clone so pick whatever you like. A 14.5” barrel with a 10” handguard is going to look odd, I’d use this one. https://geissele.com/13-5-super-modular-rail-mk4-m-lokr-odg.html |
If you aren't representing Jesus in a way that makes people want to hang out with you, you're doing it wrong.
|
Finally scored a Grey MK4 Fed rail and I picked up an Aimpoint Duty RDS. Had to wait a while, but the Surefire A2 style suppressor mount finally came in. I used a Geissele 11.5 barrel for this one, so it's not anywhere near clone correct, but it shoots good.
Grey MK4 Fed_1 by James H., on Flickr Grey MK4 Fed_2 by James H., on Flickr |
|
|
Originally Posted By jmh556: Finally scored a Grey MK4 Fed rail and I picked up an Aimpoint Duty RDS. Had to wait a while, but the Surefire A2 style suppressor mount finally came in. I used a Geissele 11.5 barrel for this one, so it's not anywhere near clone correct, but it shoots good. https://live.staticflickr.com/65535/53517959853_3ca479e595.jpgGrey MK4 Fed_1 by James H., on Flickr https://live.staticflickr.com/65535/53517960903_069c5b59d9_w.jpgGrey MK4 Fed_2 by James H., on Flickr View Quote Duty RDS is approved now. |
|
|
Can’t post pics, but here is my “inspired” HRT clone. It will eventually get an Aimpoint Duty.
The 11.5” HRT clone is finally complete. The Geissele Fed rail really makes it stand out! #guns #hrt |
|
|
Originally Posted By bluedog82: Can’t post pics, but here is my “inspired” HRT clone. It will eventually get an Aimpoint Duty. https://www.youtube.com/watch?v=Gu58EDCxZFo View Quote Great song! |
|
|
Last picture of the almost clone that didn’t quite get to be a clone before I replace the Mk4 Fed with a Mk16 to lean towards URGI.
Attached File |
|
|
Originally Posted By Deadsquiggles: Last picture of the almost clone that didn’t quite get to be a clone before I replace the Mk4 Fed with a Mk16 to lean towards URGI. https://www.ar15.com/media/mediaFiles/430237/IMG_9505_jpeg-3144823.JPG View Quote Nice Recce 5 |
|
|
Originally Posted By bluedog82: Nice Recce 5 View Quote I’m not sure if that’s sarcasm since this is a clone thread, but I’m gonna go with it’s not lol so thanks. Also part of the reason I’m kinda getting away from clones now. I just can’t mentally justify the cost of some of the clone parts like the Flow or whatever flowthru suppressor that apparently has a contract with the FBI. |
|
|
The FDE 556k the correct can for these now?
|
|
|
Originally Posted By Deadsquiggles: I’m not sure if that’s sarcasm since this is a clone thread, but I’m gonna go with it’s not lol so thanks. Also part of the reason I’m kinda getting away from clones now. I just can’t mentally justify the cost of some of the clone parts like the Flow or whatever flowthru suppressor that apparently has a contract with the FBI. View Quote View All Quotes View All Quotes Originally Posted By Deadsquiggles: Originally Posted By bluedog82: Nice Recce 5 I’m not sure if that’s sarcasm since this is a clone thread, but I’m gonna go with it’s not lol so thanks. Also part of the reason I’m kinda getting away from clones now. I just can’t mentally justify the cost of some of the clone parts like the Flow or whatever flowthru suppressor that apparently has a contract with the FBI. Everything on contract will change in a few years anyway |
|
|
[b]Originally Posted By [] I’m not sure if that’s sarcasm since this is a clone thread, but I’m gonna go with it’s not lol so thanks. Also part of the reason I’m kinda getting away from clones now. I just can’t mentally justify the cost of some of the clone parts like the Flow or whatever flowthru suppressor that apparently has a contract with the FBI. View Quote Definitely not; I have a Recce 5K on mine lol. I tell myself it’s slightly clone correct because it’s related to the Griffin HRT which was also up for the contract :[/b |
|
|
Originally Posted By jhon: The FDE 556k the correct can for these now? View Quote I thought there was a picture of the grey/black 556, but I might be wrong and it’s the FDE 556k. Originally Posted By cone256: Everything on contract will change in a few years anyway View Quote This is very true. Tbh, I’m surprised they didn’t follow the military’s lead and go with the tried and true RC2. It’s a way better looking can than the Flow too. Originally Posted By bluedog82: Definitely not; I have a Recce 5K on mine lol. I tell myself it’s slightly clone correct because it’s related to the Griffin HRT which was also up for the contract :[/b View Quote Well in that case thanks again. I kinda wish the Recce 5k was out when I ordered my Recce 5, I might’ve gone with that instead. |
|
|
Originally Posted By YukonBoy03: From another FCD fan, you have great taste. View Quote View All Quotes View All Quotes Originally Posted By YukonBoy03: Originally Posted By ChrizzaiN: Wrapped up my Noveske clone-ish build. Haven't staked the castle nut yet because I may add a Law folder, but other than that, she's finished and I love her :) https://i.postimg.cc/d1ZX9t6x/20240122-134228-2.jpg https://i.postimg.cc/rwqBLTyD/20240122-133931-2.jpg From another FCD fan, you have great taste. Thank you, I do love the duck sauce! This Noveske lower was full FCD parts before it became part of this rifle but I still felt the need to include a little flare into this build. |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.