Equipment Exchange

I have the following for sale, I will add photos as needed. I prefer PayPal F&F or add fees for goods and services. Will also accept Zelle, Venmo, or Apple Pay. These items are cross posted so priority goes to time stamp and "I'll take it" over offers.  Emails are dead, so PM for communication.

I have a set of shims for an MP5 using a Franklin Armory binary trigger or Heckfire trigger in a Pictogram trigger housing. This is a set of left and right shims, 3D printed in carbon fiber PETG to resist all chemical cleaners and hold up to a lifetime of use.

When you use the Franklin Armory binary trigger or Heckfire trigger in a Pictogram MP5 trigger housing, the safety drum is not tight in the bore of the trigger housing. These simple shims take up that empty space in between the safety cylinder and the trigger housing. These remove all play and slack from the binary trigger pack in a Pictogram housing. Note, these are not used on a SEF housing, as that's already a tight fit. These are only for the Franklin Armory binary trigger or Heckfire trigger in a Pictogram MP5 trigger housing. See the 3rd photo below for them installed.

There is a larger diameter one, for the left side of the housing, and a smaller diameter one, for the right side of the housing.

This will also come with a spare set that are a slightly looser fit to the safety cylinder and the trigger housing. Some of these housing dimensions differ from each other, so if the regular version doesn't fit, try the looser fit ones (noted by the square printed on one of the faces).

Asking $10 per set shipped.