AK Sponsor
Posted: 12/3/2016 2:24:12 AM EDT
| I fired a round at the range and the trigger has become stuck int he fired position. I have not been able to push it back. When I stripped it down, I also noted one of the eclips had popped out. I've googled it and only found mention of trigger slap. Any ideas? |
|
Originally Posted By caduckgunner:
No one? I'm assuming one or both of the axis pins has come loose. I don't know who used e-clips on it. Most are shipped with a retaining clip of wire. Lot of people replace it with a metal retaining plate. Google "replace shepards hook with retaining plate" https://www.youtube.com/watch?v=J1zz9CmshfM Be careful and wear eye protection. The hammer spring will eat you up and you'll have blood everywhere. Or find an AK enthusiast, it's a piece of cake by someone with experience. All kinds of retaining plates, you can buy them from ebay, Midway, just about anyone has them. |
|
Originally Posted By 4356:
I'm assuming one or both of the axis pins has come loose. I don't know who used e-clips on it. Most are shipped with a retaining clip of wire. Lot of people replace it with a metal retaining plate. Google "replace shepards hook with retaining plate" https://www.youtube.com/watch?v=J1zz9CmshfM Be careful and wear eye protection. The hammer spring will eat you up and you'll have blood everywhere. Or find an AK enthusiast, it's a piece of cake by someone with experience. All kinds of retaining plates, you can buy them from ebay, Midway, just about anyone has them. Thanks for the info. |
AK Sponsor