AK Sponsor
BIY Pic Thread! (Page 11 of 12)
5.56 AK 104 or 105 ? not sure. Mostly American and Bulgy parts, maybe a Polish rear tang thrown in there ? Ohio Ord. 5.45 receiver. 11.5" chromed lined bulgy 1-7 barrel, CNC Warrior pinned and welded 5" extended 4 piece flash hider. KNS front sight, XS Sights rear peep. Takes standard AK mags or AR mags, drums, etc. AR butt pad, with storage compartment. TWS cover. The wood is fiddle-back maple, or whatever you want to call it maple. Took too long to build. I'm done with these builds for a while. Shoots good, gassed down, low drag.
  
|
Completed my first build last night, a Polish underfolder. Thanks to a good friend of mine who is a machinist at AK Builder, I had access to all the tools, as well as answers to all of my "build-newbie" questions. I am also deeply thankful to Curtis and the guys at AK Builder for letting me use their shit and for putting up with mine.
What I started with: 
We now have a firearm: 
Trunnions and trigger guard installed: 
The finished product: 
We did have a few minutes of daylight left after we got done. So I ran home, grabbed a couple mags, raced over to our shooting spot, and put 60 rounds through her like butter. I'm gonna have to do a bit of grinding in the mag well area as all the steel mags I've tried have been very tight to lock in, and I need to work the folding mechanism some as it is also a bit too tight. Other than that, no issues to speak of. Action is smooth, she hits point of aim, I'm happy and already planning the next build. 
|
|
Originally Posted By cphilip: The three I have built so far... http://i142.photobucket.com/albums/r89/cphilip/AKromyGfinished.jpg http://i142.photobucket.com/albums/r89/cphilip/AKRomy81-3.jpg http://i142.photobucket.com/albums/r89/cphilip/AK74pistolfnshd2.jpg |
Approval was about 5 weeks shy of a year...on a trust. Maryland is fucking ridiculous.
krink1 by Armed Ferret, on Flickr 
krink2 by Armed Ferret, on Flickr |
tweeter:
After work today I'm gonna take off my pants and start this revolution.
Originally Posted By BobRoberts:
In and around my mouth, bouncing off my chin, off my taint, basically everywhere.
After work today I'm gonna take off my pants and start this revolution.
Originally Posted By BobRoberts:
In and around my mouth, bouncing off my chin, off my taint, basically everywhere.
|
Originally Posted By DetrhoytMAK:
Completed my first build last night, a Polish underfolder. Thanks to a good friend of mine who is a machinist at AK Builder, I had access to all the tools, as well as answers to all of my "build-newbie" questions. I am also deeply thankful to Curtis and the guys at AK Builder for letting me use their shit and for putting up with mine.
I wish I had an "in" with AK Builder.  Very nice!
AK Builder barreled kit, Childers receiver. Just finished. Hitting the range tomorrow. 
|
Life Member of the NRA...In a few more easy quarterly payments!
Member JPFO
Member Team Ranstad
Secretary Rogers (Arkansas) Gun Club
Member JPFO
Member Team Ranstad
Secretary Rogers (Arkansas) Gun Club
Details on handguard can be found HERE 
|
...
|
Originally Posted By ArmedFerret:
Approval was about 5 weeks shy of a year...on a trust. Maryland is fucking ridiculous. <a href="https://flic.kr/p/pdoN6T" target="_blank">https://farm6.staticflickr.com/5559/15236451165_67f29d5867_o.jpg</a> krink1 by Armed Ferret, on Flickr <a href="https://flic.kr/p/oVUAc6" target="_blank">https://farm6.staticflickr.com/5562/15049884027_71ea378bb9_o.jpg</a> krink2 by Armed Ferret, on Flickr Professor Horsey Head! Good to hear from you! That AK is sweet, nice job. Yes, everything about Maryland is effing stupid. |
|
Originally Posted By TheDevilYouLove:
Professor Horsey Head! Good to hear from you! That AK is sweet, nice job. Yes, everything about Maryland is effing stupid. Originally Posted By TheDevilYouLove:
Originally Posted By ArmedFerret:
Approval was about 5 weeks shy of a year...on a trust. Maryland is fucking ridiculous. <a href="https://flic.kr/p/pdoN6T" target="_blank">https://farm6.staticflickr.com/5559/15236451165_67f29d5867_o.jpg</a> krink1 by Armed Ferret, on Flickr <a href="https://flic.kr/p/oVUAc6" target="_blank">https://farm6.staticflickr.com/5562/15049884027_71ea378bb9_o.jpg</a> krink2 by Armed Ferret, on Flickr Professor Horsey Head! Good to hear from you! That AK is sweet, nice job. Yes, everything about Maryland is effing stupid. Don't go sayin you saw me post anywhere. Norton might ban you just for bringing me up. 
|
tweeter:
After work today I'm gonna take off my pants and start this revolution.
Originally Posted By BobRoberts:
In and around my mouth, bouncing off my chin, off my taint, basically everywhere.
After work today I'm gonna take off my pants and start this revolution.
Originally Posted By BobRoberts:
In and around my mouth, bouncing off my chin, off my taint, basically everywhere.
|
Originally Posted By ArmedFerret:
Don't go sayin you saw me post anywhere. Norton might ban you just for bringing me up. Originally Posted By ArmedFerret:
Originally Posted By TheDevilYouLove:
Originally Posted By ArmedFerret:
Approval was about 5 weeks shy of a year...on a trust. Maryland is fucking ridiculous. <a href="https://flic.kr/p/pdoN6T" target="_blank">https://farm6.staticflickr.com/5559/15236451165_67f29d5867_o.jpg</a> krink1 by Armed Ferret, on Flickr <a href="https://flic.kr/p/oVUAc6" target="_blank">https://farm6.staticflickr.com/5562/15049884027_71ea378bb9_o.jpg</a> krink2 by Armed Ferret, on Flickr Professor Horsey Head! Good to hear from you! That AK is sweet, nice job. Yes, everything about Maryland is effing stupid. Don't go sayin you saw me post anywhere. Norton might ban you just for bringing me up. No worries. I'm cutting way back on MDS anyway. |
|
Originally Posted By TheDevilYouLove:
No worries. I'm cutting way back on MDS anyway. Originally Posted By TheDevilYouLove:
Originally Posted By ArmedFerret:
Originally Posted By TheDevilYouLove:
Originally Posted By ArmedFerret:
Approval was about 5 weeks shy of a year...on a trust. Maryland is fucking ridiculous. <a href="https://flic.kr/p/pdoN6T" target="_blank">https://farm6.staticflickr.com/5559/15236451165_67f29d5867_o.jpg</a> krink1 by Armed Ferret, on Flickr <a href="https://flic.kr/p/oVUAc6" target="_blank">https://farm6.staticflickr.com/5562/15049884027_71ea378bb9_o.jpg</a> krink2 by Armed Ferret, on Flickr Professor Horsey Head! Good to hear from you! That AK is sweet, nice job. Yes, everything about Maryland is effing stupid. Don't go sayin you saw me post anywhere. Norton might ban you just for bringing me up. No worries. I'm cutting way back on MDS anyway. Seems to be the trend among many of my friends still there. Pic thread. 
IMG_1239 by Armed Ferret, on Flickr Rifle I built, in a coffee table I built.
|
tweeter:
After work today I'm gonna take off my pants and start this revolution.
Originally Posted By BobRoberts:
In and around my mouth, bouncing off my chin, off my taint, basically everywhere.
After work today I'm gonna take off my pants and start this revolution.
Originally Posted By BobRoberts:
In and around my mouth, bouncing off my chin, off my taint, basically everywhere.
|
Originally Posted By def90:
A pair of Bulgy's I built last summer, still haven't gotten around to refinishing them yet.. https://lh3.googleusercontent.com/-iZog95ZxEp4/UhkxPmKv1tI/AAAAAAAAC0c/cVHcX4aaWsA/s800/IMG_20130824_160408_114sm.jpg That one on the bottom looks really nice. 
|
Life Member of the NRA...In a few more easy quarterly payments!
Member JPFO
Member Team Ranstad
Secretary Rogers (Arkansas) Gun Club
Member JPFO
Member Team Ranstad
Secretary Rogers (Arkansas) Gun Club
|
Originally Posted By joemuff41: First AK build. AK-74 built on a parts kit with a rust-blued finish and handmade pistol grip. http://i934.photobucket.com/albums/ad186/joemuff41/AK-74/DSCN9484_zps0d7ffb1d.jpg http://i934.photobucket.com/albums/ad186/joemuff41/AK-74/DSCN9486_zps46591132.jpg http://i934.photobucket.com/albums/ad186/joemuff41/AK-74/DSCN9487_zps100d0eec.jpg http://i934.photobucket.com/albums/ad186/joemuff41/AK-74/DSCN9500_zpsdbe72691.jpg http://i934.photobucket.com/albums/ad186/joemuff41/AK-74/DSCN9502_zps283edbbb.jpg Very nice !
|
“The further a society drifts from truth, the more it will hate those who speak it.” - George Orwell
|
Originally Posted By awptickes:
I thought I posted these pics here already. Guess not. https://lh3.googleusercontent.com/-LkhdapL5Tp0/VBSy-2Q4rCI/AAAAAAAAG3U/h5Hzr582ekw/w952-h714-no/FB_IMG_1410642238568.jpg https://lh5.googleusercontent.com/-TM049rorWMw/VBSyAg03PDI/AAAAAAAAG3I/cmAmnC78-RE/w952-h714-no/IMG_20140913_152425.jpg I need to take a couple more pics. Here it is in the background, just ignore the gun in the foreground: https://lh5.googleusercontent.com/-3SEHZ0nzLCI/VH5WGY1ddjI/AAAAAAAAHqY/he4H6MmuJyg/w478-h714-no/DSC_0022.JPG I'm cutting down on MDS too. They're getting kinda crazy. How's things AF? Shitty. Cute guns tho.
|
tweeter:
After work today I'm gonna take off my pants and start this revolution.
Originally Posted By BobRoberts:
In and around my mouth, bouncing off my chin, off my taint, basically everywhere.
After work today I'm gonna take off my pants and start this revolution.
Originally Posted By BobRoberts:
In and around my mouth, bouncing off my chin, off my taint, basically everywhere.
|
Originally Posted By showsuw:
Nice build.....but. Your selector stop is installed up-side-down. if you're talking about awptickes' build (which is the best guess I can give, since you didn't quote the post you're referencing), no. it isn't. if you're not talking about awptickes' build, then you need to use the quote function so you don't look like a schmuckatelli. kthx. |
tweeter:
After work today I'm gonna take off my pants and start this revolution.
Originally Posted By BobRoberts:
In and around my mouth, bouncing off my chin, off my taint, basically everywhere.
After work today I'm gonna take off my pants and start this revolution.
Originally Posted By BobRoberts:
In and around my mouth, bouncing off my chin, off my taint, basically everywhere.
| The particular unique wood was just about all beat upwards and also carved directly into (very great) however it was cracked and slipping apart. So I threw the Russian set on as an alternative, it's got a nice authentic golden color in order to it and i also just like that. I didnrrrt refinish it in any way. |
|
Originally Posted By ghtingal:
One day I'll have a press and I'll spring for a rivet jig to fix it. Just a suggestion, post a "Request for help" in your state's "Home Town Forum" here at ARFCOM as to what you need to do. You'd be surprised at the number of members here willing to help you. If they've got the tools and are close to you, you'll probably have a few posts from members who are willing to have you come over with your rifle to get this worked out. 
|
I remember Daniel M. Estok, AKA MrClean4hire
July 13, 1970 - July 15, 2011
July 13, 1970 - July 15, 2011
No, my name is not a reference to enemas.
Joined:
Jan 2007
Posts:
5500
EE: 100% (84)
MO, USA
|
Originally Posted By Hueto:
Also, I'm about two steps away from throwing this fucking thing in the trashcan. Why's that? |
"Nothing says 'come to my tree stand for a good cornholing' more than a Browning Buckmark sticker on your oversized truck." - dport
"Tactical" is a mindset, not an equipment list.
"Tactical" is a mindset, not an equipment list.
|
Originally Posted By AEnemaBay:
Why's that? Originally Posted By AEnemaBay:
Originally Posted By Hueto:
Also, I'm about two steps away from throwing this fucking thing in the trashcan. Why's that? That whole, "Be smarter than the tool" thing.
I got the kit about 2 years ago, and rust blued the receiver about a year ago. I've had way too many projects to finish this particular one up. Either way, I was tired of seeing it sitting on the bench and wanted it done. Last week, I started riveting in the front trunnion, using the super special, 100% correct rivets I got from a guy on the AK Forum. After setting the two front sell necks, I realized the non-swell necks had different head profile and size. I tried researching as best I could, but could not find any evidence of that being the correct look. Anyways, I finished off the last four rivets with some of Curtis' rivets. After fiddle fucking with the rear trunnion and the poor fit to the NDS receiver, I accepted the poor fit and mocked it up with screws to make sure the latch worked. It did, so I set the long rivet. This being the first flat head rivet I've done, I used a flat piece of tool steel as a bucking bar. Right after marveling at another beautiful domed rivet, I discovered that the flat bucking bar flattened the factory rivet head into the diameter of a dime. I drilled it out, took the trunnion out to clean all the shavings out between it and the receiver, re-installed it with screws, checked stock fit, and started again with a K-Var rivet. Set the rivet, and the formed head was tiny. Rivet was too short. Drilled it out, repeated the process, and used one of Curtis' long rivets. Set beautifully. Too bad I filed down the right side dome head though. Bonehead move. After that, it was pie. Shit, the front and rear latches were waaaay easier than anticipated. All of the internal rivet tails look great, and I maintained a nice dome on the trunnion/scope rail rivet. Hopefully, I'll headspace tonight and get it done. Lessons learned- Don't work tired Don't work too drunk Don't assume all rivets are sized correctly ETA- Done. Now, back to playing with mutt builds and Yugos. 
I think I recall reading Gun Plumber's comments on NDS to Bulgarian trunnion fit issues, but ti looks like he pulled down a lot of the tutorials on his site. 
|
|
Just started a new build and couldn't find my lucky dimple die, which is just a heat-treated head of a drywall screw. It took a re-organization of the AK tool drawer to find it.
Anyways, tool pics. 
Far left of pic is the deformed remnant of a sight pusher, which works perfectly for clearing the center support for pressing trigger guard rivets.
|
|
1985 Circle 11, built a couple of years ago, all matching numbers
http://imagizer.imageshack.us/v2/1280x1024q90/673/aGYoOt.jpg http://imagizer.imageshack.us/v2/1280x1024q90/661/KvN8oM.jpg http://imagizer.imageshack.us/v2/1280x1024q90/537/wkFU3U.jpg http://imagizer.imageshack.us/v2/1280x1024q90/912/qCO5Ft.jpg http://imagizer.imageshack.us/v2/1280x1024q90/538/uKaJ34.jpg |
|
Originally Posted By Indigen_Actual:
1985 Circle 11, built a couple of years ago, all matching numbers [url=http://imagizer.imageshack.us/v2/1280x1024q90/673/aGYoOt.jpg[/url] http://imagizer.imageshack.us/v2/1280x1024q90/661/KvN8oM.jpg http://imagizer.imageshack.us/v2/1280x1024q90/537/wkFU3U.jpg http://imagizer.imageshack.us/v2/1280x1024q90/912/qCO5Ft.jpg http://imagizer.imageshack.us/v2/1280x1024q90/538/uKaJ34.jpg Here ya go.
|
Life Member of the NRA...In a few more easy quarterly payments!
Member JPFO
Member Team Ranstad
Secretary Rogers (Arkansas) Gun Club
Member JPFO
Member Team Ranstad
Secretary Rogers (Arkansas) Gun Club
Balog's ignore list is bigger than mine. :(
Joined:
Sep 2011
Posts:
3841
EE: 100% (165)
AR, USA
|
Her is a parts list of my Little Monster.
SA&A Aero Precision Lower Aero Precision Enhanced upper Aero Precision Enhanced 15" M-Lok handgaurd Lilja AR24 Barrel 6.5mm Grendel JP Enterprises JPGS-8 .936 adjustable Gas Block. Precision Firearms Nickle Boron BCG. BCM Gunfighter Mod A4A Charging Handle. Magpul PRS Stock. Surplus Ammo And Arms Lower. CMMG LPK Falcon Industries Ergo Grip w/Palm Shelf. 
|
|
Originally Posted By gooffy140:
Her is a parts list of my Little Monster. SA&A Aero Precision Lower Aero Precision Enhanced upper Aero Precision Enhanced 15" M-Lok handgaurd Lilja AR24 Barrel 6.5mm Grendel JP Enterprises JPGS-8 .936 adjustable Gas Block. Precision Firearms Nickle Boron BCG. BCM Gunfighter Mod A4A Charging Handle. Magpul PRS Stock. Surplus Ammo And Arms Lower. CMMG LPK Falcon Industries Ergo Grip w/Palm Shelf. http://i430.photobucket.com/albums/qq22/Gooffy381/20150308_134328_edit_1425863815380.jpg http://i430.photobucket.com/albums/qq22/Gooffy381/20150308_134414_edit_1425863608346.jpg http://i430.photobucket.com/albums/qq22/Gooffy381/20150308_134345.jpg http://i430.photobucket.com/albums/qq22/Gooffy381/20150308_134401.jpg Wow, that's a funny-lookin AK. 
|
20 January, 2015
The day we got him back.
The day we got him back.
|
Originally Posted By ArmedFerret:
Wow, that's a funny-lookin AK. Originally Posted By ArmedFerret:
Originally Posted By gooffy140:
Her is a parts list of my Little Monster. SA&A Aero Precision Lower Aero Precision Enhanced upper Aero Precision Enhanced 15" M-Lok handgaurd Lilja AR24 Barrel 6.5mm Grendel JP Enterprises JPGS-8 .936 adjustable Gas Block. Precision Firearms Nickle Boron BCG. BCM Gunfighter Mod A4A Charging Handle. Magpul PRS Stock. Surplus Ammo And Arms Lower. CMMG LPK Falcon Industries Ergo Grip w/Palm Shelf. http://i430.photobucket.com/albums/qq22/Gooffy381/20150308_134328_edit_1425863815380.jpg http://i430.photobucket.com/albums/qq22/Gooffy381/20150308_134414_edit_1425863608346.jpg http://i430.photobucket.com/albums/qq22/Gooffy381/20150308_134345.jpg http://i430.photobucket.com/albums/qq22/Gooffy381/20150308_134401.jpg Wow, that's a funny-lookin AK. Opps, sorry. Oh well, it's. Nice to see something differnt. Posted from my phone and didn't realize I had gotten on the AK forum. |
IMG_7819 by 556 Channel (HD), on Flickr 
IMG_7814 by 556 Channel (HD), on Flickr 
IMG_7812 by 556 Channel (HD), on Flickr 
IMG_7799 by 556 Channel (HD), on Flickr 
IMG_5995 by 556 Channel (HD), on Flickr 
IMG_6041.1 by 556 Channel (HD), on Flickr |
BIY Pic Thread! (Page 11 of 12)
AK Sponsor