AK Sponsor
Posted: 9/3/2016 2:13:46 PM EDT
[Last Edit: AZ_SBR][Edited]
|
Originally Posted By AZ_SBR:
[span style='font-weight: bold;']1) In terms of LEO notification, it's unclear to me whether the individual is responsible for that or the ATF actually handles that themselves. I think it's the latter, but not certain. for notification, the "maker" has to send a copy of the form 1 to the CLEO. it's all spelled out in the instruction on 2g of the instruction. you also have to provide a copy for each responsible person on your trust to the CLEO (ATF form 5320.23) ! 3) I ordered the "Form 1 Application Kit" from the ATF website + extra copies of the fingerprint cards (for me, my wife, and my dad as trustees/beneficiary of the trust). Any idea how long the ATF takes to send forms out? Should I just print because the sooner I can get the fee paid and the forms sent off, the better. except of the fingerprint cards, those you can't print out. you can if you want download and print the necessary forms off the web; form 1 and form 5320.23 https://www.atf.gov/file/11281/download https://www.atf.gov/firearms/docs/form/national-firearms-act-nfa-responsible-person-questionnaire-532023/download ! 4) For guys that have Form 1'd an SLR104, 105, 106 UR variant, anything to be cautious of when completing the form with make/model info so as to avoid a mistake?! the only thing that you can possible mess up is in block 4a NAME AND ADDRESS OF ORIGINAL MANUFACTURER. it isn't ARSENAL INC. LAS, VEGAS, NV. that is the importer. I went to the Bulgarian ARSENAL website and wrote where in Bulgaria ARSENAL it's located at and wrote that in ARSENAL, INC. KAZANLAK, BULGARIA as a matter of fact, the location of the factory is also printed right on your box I just hope you have better luck adjusting the elevation after having your barrel cut down. I broke the elevation tool trying to bringing the sight down a bit. I tried all the tricks I have ever read about freeing up the front sight, heat, KROIL, PB BLASTER etc... trying needle nose pliers, all to no avail, it won't budge 1mm. the windage drum was freed up, but no go on the front sight post. I just have to compensate for it, by aiming a bit high to get the rounds to hit where I want it to hit. |
you're welcome 
I see that you edited to say you'll be getting a WOLFF POWER SPRING. you'll be just throwing away money on buying something you don't need . I have a Bulgarian AKS 74U (5.45) I had built back in 2004 and shot the shit out of it since then, way, way more then 8K rounds with the original spring it came with and it's holding up well. the 5.45 rifle has very low to non existent recoil to begin with, even with a 8 inch barrel IMO, all these "gotta have/need" AK after market gizmos and parts are nothing more then manufacturers gimmicks to peddle snake oil you don't need. your AK the way it is now, is as good as it gets. so don't fall for that "need this" to make it better bullshit. put that money you were going to spend on that snake oil for something better ie. mags and ammo. |
| The "Extra Power Spring" is just to tame the recoil and allow the rifle to cycle better in its 16" barrel configuration. So it will just make it more shootable with less wear-and-tear on the internals while I wait for my Form 1 to get approved. Once I eventually chop the barrel, I'll switch back to the OEM spring as it was intended. |
AK Sponsor