AR Sponsor
[ARCHIVED THREAD] - Another BCP A2/A4 Lower run soon! (Page 1 of 2)
Posted: 3/18/2019 1:54:44 AM EDT
I was at Black Creek Friday and Tina mentioned after they complete the big order they are working on, they will do another run of the A2/A4 clone lowers. If anyone is interested in the FN style lowers with SAFE, SEMI, and BURST markings and PROPERTY OF US GOVT, M16A2, and CALIBER 5.56, you need to call Tina at 888 426 6624 for details.
|
|
Quoted:
Any chance of them being grey? Attached File Attached File |
|
Quoted:
@C6H12O6 Any more info on these lowers? Their e-mail is: [email protected] They do still need to get a CAGE code to really make the M16A4 lower that much better. In fact it’d be perfect if they got the CAGE then above the trigger/hammer pin area (on the A4) put: BCP - JAX, FL CAGE #X#X# |
| All BCP lowers are tight on every upper I have tried with them. The lower comes with a tensioning screw if by chance there is any slack you may want to take up. Ive never used it but Ive always paired the BCP lower with a quality upper. BCP is local and I use their regular lowers on all of my builds. $89 for a high quality lower that has the tensioning screw, an allen screw for the mag catch and for the take down detent. I would put their lowers up against any higher priced, big name manufacturers. |
|
Quoted:
All BCP lowers are tight on every upper I have tried with them. The lower comes with a tensioning screw if by chance there is any slack you may want to take up. Ive never used it but Ive always paired the BCP lower with a quality upper. BCP is local and I use their regular lowers on all of my builds. $89 for a high quality lower that has the tensioning screw, an allen screw for the mag catch and for the take down detent. I would put their lowers up against any higher priced, big name manufacturers. They are indeed great lowers. Big fan of the threaded bolt catch pin. |
|
Quoted:
All BCP lowers are tight on every upper I have tried with them. The lower comes with a tensioning screw if by chance there is any slack you may want to take up. Ive never used it but Ive always paired the BCP lower with a quality upper. BCP is local and I use their regular lowers on all of my builds. $89 for a high quality lower that has the tensioning screw, an allen screw for the mag catch and for the take down detent. I would put their lowers up against any higher priced, big name manufacturers.   [
I agree the threaded pins are nice on normal builds, but not on an intended clone lower...  Am I missing something? Where dfuk are the clone police on this?
|
|
Quoted: What?? A2/A4 clone lower with threaded bolt catch pin?? [
I agree the threaded pins are nice on normal builds, but not on an intended clone lower... Am I missing something? Where dfuk are the clone police on this?
I suppose its like restoring a 60s muscle car, but installing disc brakes and fuel injection. |
|
Quoted:
How? I need to know these secrets |
|
Quoted:
What?? A2/A4 clone lower with threaded bolt catch pin? I agree the threaded pins are nice on normal builds, but not on an intended clone lower... Am I missing something? Where dfuk are the clone police on this? |
|
OK guys, if you are interested in any of these A2 and A4 lowers, get your order in. I went by BCP yesterday and bought another blem lower and spoke with Tina. She said interest is high this time around and she has received about 30 orders so far.
She also said: Friday, April 19, 2019 will be the cut off date for orders Now is the time if you want one, two or eight. It will be several months and again, interest has to be there for at least 10-15 for them to produce another run. Get em while they are hot!! |
|
Quoted: What?? A2/A4 clone lower with threaded bolt catch pin?? [
I agree the threaded pins are nice on normal builds, but not on an intended clone lower... Am I missing something? Where dfuk are the clone police on this?You cannot make everyone happy but it seems there are at least 100 people who didnt mind the threaded catch pin. This is BCP's third run of these A2 lowers so something is being done right. You cant get an 80% and have it milled, engraved and anodized for $114. Go to NoDak or MacKay and wait several months for them to restock if you want a roll pin instead of the threaded pin. Personally I would rather use an allen wrench than scratch up my lower trying to get the roll pin in. |
|
Quoted:
OK guys, if you are interested in any of these A2 and A4 lowers, get your order in. I went by BCP yesterday and bought another blem lower and spoke with Tina. She said interest is high this time around and she has received about 30 orders so far. She also said: Friday, April 19, 2019 will be the cut off date for orders Now is the time if you want one, two or eight. It will be several months and again, interest has to be there for at least 10-15 for them to produce another run. Get em while they are hot!! |
|
Quoted:
Calls only, or email? I've tried email a few times with no response. Tina have a direct email? Quoted:
Calls only, or email? I've tried email a few times with no response. Tina have a direct email? Quoted:
I called BCP the other day to express my interest as I’d been directed to by previous members. Tina at BCP asked that I e-mail her with my interest/contact info so she’d have a way to contact if they’re produced. Their e-mail is: [email protected] They do still need to get a CAGE code to really make the M16A4 lower that much better. In fact it’d be perfect if they got the CAGE then above the trigger/hammer pin area (on the A4) put: BCP - JAX, FL CAGE #X#X# |
[ARCHIVED THREAD] - Another BCP A2/A4 Lower run soon! (Page 1 of 2)
AR Sponsor