AR Sponsor
Posted: 10/27/2019 8:18:03 PM EDT
|
So I have a couple of lowers coming.
I think I want to do a 6.8 SBR. I see like anything else AR there is a ton of different barrel lengths. 10.5, 11.5, 12.5 For those that have build one, what barrel length did you use and why? Thanks. |
|
Originally Posted By REAPER2502:
So next question. Who makes a quality barrel? What does it mean when a chamber is cut for 6.8 SPC II? RE: 6.8 SPC II: This is a long story, but in short the SPC chamber that went to SAAMI from Remington was not the one that was used on the prototype. It was messed up in that you could build a round to spec but it might not fit in the chamber (due to a Remington fuck up). The SPC II chamber fixed the problem and is closer to the original idea. Think of it as a M16 5.56 chamber vs a match .223 chamber - in that it can handle high pressures better. |
"with a Big Iron on his hip" - Marty Robbins
I f*ckin hate leftists.... seriously, I do.
Joined:
May 2004
Posts:
13148
EE: 100% (191)
USA
|
Bison amory is pretty good, I have an 11.5 from them and a pair of 12.5 Kreiger barreled custom rifles. Get a headspaced bolt while you're at it.
Shoot me a PM if you're thinking of buying one, I'm planning on selling the 11.5 because we don't use it much, its had less than 100 rounds through it. |
"If you think its expensive hiring a professional, try hiring an amateur first."
-A. Einstein
-A. Einstein
|
6.8 was originally meant to perform with a 14.5" as an upgraded M4. Since I didn't want a pistol at the time - no braces existed - and $200 for a tax stamp was a bit of an extravagance much less the delays involved for what would be a deer rifle, I went 16" midlength. The extra 1.5" over M4 makes it easier to transport vs an SBR, legal in more jurisdictions, and offers a wider range of options. I first built it as an A1 dissipator with A2 fore end held on with an Armalite clamp on FSB, then later changed it up to a Minimalist with Gator Grip free float. This brings up a specific issue I created - the dissipator with rifle buffer worked great, switching it to carbine immediately caused failure to eject and double feeds. I decided the 6.8 simply has more power, and it takes more buffer to slow the cyclic speed. To do that, an H2 or H3 may be necessary, same as CRANE specifying that as a remedy for the Mk 18 in 10.3". I have tungsten weights inbound and will start with H3. YMMV. |
|
I have an 11.3" Wilson Combat barrel in my pistol. Currently waiting for the Form 1 to SBR it to come back.
Got the barrel here on the EE 
|
I hated going to weddings. All the grandmas would poke me and say "You're next". They stopped that when I started doing it to them at funerals.
|
Originally Posted By Theblakester:
Why aren’t we allowed to suggest |
|
Originally Posted By Desert_AIP:
Some hurt feelings from 10 years ago. Regardless the 12.5" barrel from the superb unmentionable barrel maker is the way to go. Mine is complimented by a Saker 7.62 and has dropped hogs, whitetail deer and antelope. Longest ranged rest supported shot was 305 yards on a whitetail. I have a self imposed limit of 325 based on bullet terminal performance. Good luck with your build regardless of what barrel you choose. |
"LIBERALS LIVE IN A WORLD IN WHICH EVERYONE IS EITHER an oppressor or a victim !"
|
Wow... I wonder if the person who made that rule also gets upset when the owners of google, Facebook and Twitter curb search results in favor of liberal media outlets ban gun channels, and block conservative content.
Also, my brother in law has an 11.5” SBR in 6.8 and he’s very happy with it. Can’t remember if it’s bison or Wilson. But mine is a 12.5” AR16 preformensce and I love it. Erick at blakc ztohne armz is awesome to deal with too. Edit: 11/25/19 23:30 EST: wow they actually deleted my earlier post that named the banned barrel maker. That’s pathetic. The gun community is supposed to support the bill of rights and ALL of the amendments. Especially the 1st. I’m blown away that this site would act like twitter, Facebook and google and be biased and block counted they don’t like. The moderates of arfcom are fascists. How ironic and sad. |
|
Originally Posted By Theblakester:
Edit: 11/25/19 23:30 EST: wow they actually deleted my earlier post that named the banned barrel maker. That’s pathetic. The gun community is supposed to support the bill of rights and ALL of the amendments. Especially the 1st. . This isn't about somebody 'the site doesn't like' this is about a company that caused much trouble here, and when banned from posting effectively paid people to come here to shill and post shit. The owners of this site don't want to be associated with such behavior and they sure don't want to advertise for them. If you're not adult enough to follow the posted forum rules (the ones you agreed to when you joined the site) well Tumbler is that way --> |
"with a Big Iron on his hip" - Marty Robbins
|
Originally Posted By 50cal:
I have an 11.3" Wilson Combat barrel in my pistol. Currently waiting for the Form 1 to SBR it to come back. Got the barrel here on the EE https://www.AR15.Com/media/mediaFiles/89/20190417_083103-925362.jpg |
You know, Hobbes, some days even my lucky rocketship underpants don't help. -Calvin
AR Sponsor