AR Sponsor
Home Defense/Trunk Gun/Duty AR-15 Picture Thread! (Page 1 of 12)
Posted: 6/2/2016 1:29:16 PM EDT
[Last Edit: pointman12][Edited]
|
We don't have a pic thread strictly for defensive rifles, so lets see them!
This will include home defense, vehicle defense (ie, trunk guns), and duty rifles. Basically any AR that fills the role of protecting you, should that time come, is fair game. Lets limit this to rifles only (no pistols). Feel free to write a quick description on the specs of your build, as well as the ammo you have loaded up. I'll start with mine: Upper: LMT 10.5 F1 .30 6" Ti suppressor Geissele Mk2 rail Surefire Mini Scout Aimpoint T1/LT660 PA 3x magnifier (doesn't always stay on there) KAC VFG MBUS Lower: LMT Defender 2000 SBR Geissele SSA-E Because of cost, I have 62gr MSR Fusion in my mag 
This was a trunk gun I had for a while. It was a KAC SR-15 E3 Mod 0 upper, Leupold Mark AR 1.5-4x20, and Anderson lower. 
|
Filthy sinner saved by grace
"9mm gets the job done!" - Trayvon Martin (GTwannabe)
Follow us on Instagram at tier1_douchebags!
"9mm gets the job done!" - Trayvon Martin (GTwannabe)
Follow us on Instagram at tier1_douchebags!
|
Home Defense SBR.  10" upper with suppressor, S2S trigger, Aimpoint M2, Surefire, LWRC UCIW stock kit, MOE+ grip, 40rd Pmag with 75gr TAP. Truck/trunk gun.  12" Larue barrel, SOPMOD Stock, MBT, Weaver Tactical 2-10x36 FFP, H buffer, Damage Industries Enhanced spring, MI gen 3 MLOK rail, UTG Recon 360 bipod. This one is more of a combination hunter/defense/mini SPR setup. |
$ 399 for plate carrier and plates-
http://www.ar15.com/forums/t_7_121/1549212_Potential_GB___2_x_SKD_Armor_10x12_Level_IV_Plates___Paraclete_SOHPC_SKD_Spec_Plate_Carrier___399_.html
http://www.ar15.com/forums/t_7_121/1549212_Potential_GB___2_x_SKD_Armor_10x12_Level_IV_Plates___Paraclete_SOHPC_SKD_Spec_Plate_Carrier___399_.html
|
This is the rifle I usually keep out and by the bedside when the kids are put to bed when I'm at the house.
Complete KAC 11.5" SR15 CQB Block II KAC QDSS-NT4 with Triple Tap Brake Surefire M300B Scout with SR07 Switch / Gear Sector Mount Ammo: Hornady TAP 75gr 5.56 ETA: Replacing pics since PB halted the 3rd party hosting. 
and usually carry the top Mk18 Block I clone as well in the truck. 
|
Freedom is not Free..
The 2nd Amendment is a RIGHT, not a Privilege...
Gun Gallery 4 Life: "Selling Guns, Changing People's Lives"
The 2nd Amendment is a RIGHT, not a Privilege...
Gun Gallery 4 Life: "Selling Guns, Changing People's Lives"
Wow such KAC. Very corncob. 
 10.3 master race by splittiebus 66, on Flickr
If it's in the cue it's chillin with the Specwar can on it. Loaded now with 64gr Nosler BSB over 26gr of CFE223 in lake city brass. CCI41 primer. |
I always sleep with my guns when you're gone
|
Originally Posted By BallisticTip:
http://i1296.photobucket.com/albums/ag1/bradwd/M4Clone_zps83b8108f.jpg Probably needs a light |
|
Originally Posted By BallisticTip:
http://i1296.photobucket.com/albums/ag1/bradwd/M4Clone_zps83b8108f.jpg Where's your light? |
Filthy sinner saved by grace
"9mm gets the job done!" - Trayvon Martin (GTwannabe)
Follow us on Instagram at tier1_douchebags!
"9mm gets the job done!" - Trayvon Martin (GTwannabe)
Follow us on Instagram at tier1_douchebags!
|
Originally Posted By fatcat4620:
A2 upper with a mid length barrel, KZ front sight aimpoint mount and primary arms flashlight mount. http://i65.tinypic.com/20rytf.jpg 
|
Filthy sinner saved by grace
"9mm gets the job done!" - Trayvon Martin (GTwannabe)
Follow us on Instagram at tier1_douchebags!
"9mm gets the job done!" - Trayvon Martin (GTwannabe)
Follow us on Instagram at tier1_douchebags!
PSA Premium FN CMV mid-length upper cut to 14.5 by ADCO with a pinned/welded YHM 5C1 BCM BCG and Mod 44 ambi charging handle Centurion Arms C4 12" rail Aero Precision lower receiver PSA lower parts kit Spikes Tactical buffer tube ALG QMS trigger Magpul MIAD grip, MOE trigger guard, VFG B5 SOPMOD stock Aimpoint PRO in an ADM mount KAC 200-600 micro rear and 99051 front BUIS Surefire mini scout with IWC mount VTAC padded upgrade sling with QD swivels (not pictured) Loaded with 62gr Federal Fusion |
|
Best trust name I've ever seen, I shoulda done something like that |
|
Originally Posted By pointman12:
This was a trunk gun I had for a while. It was a KAC SR-15 E3 Mod 0 upper, Leupold Mark AR 1.5-4x20, and Anderson lower. http://i.imgur.com/388Hsgn.jpg What is that bag? |
|
Originally Posted By mancat:
What is that bag? Originally Posted By mancat:
Originally Posted By pointman12:
This was a trunk gun I had for a while. It was a KAC SR-15 E3 Mod 0 upper, Leupold Mark AR 1.5-4x20, and Anderson lower. http://i.imgur.com/388Hsgn.jpg What is that bag? Looks like a LaRue Covert Rifle Case. http://www.larue.com/covert-rifle-case-mkII |
I now have a ban button. Want to see me use it? Keep it up. - Lancelot
You do not fight out of hate, but rather out of the love and compassion you have for those you are trying to protect.
You do not fight out of hate, but rather out of the love and compassion you have for those you are trying to protect.
(Specs as requested) Battle Arms Development billet upper/lower 300 BLK 8.0" Ballistic advantage barrel ALG Defense trigger V seven Dust cover Fortis Rev II key mod rail (7") MVB industries ARC stock Superlative Arms adjustable gas block .750 LPK s built kit of KNS, Norgon, etc ) Silencer co flash hider and 7.62 specwar suppressor Amazon.com $50 gun light has not failed on any firearm yet
If I had enough time 
|
|
Originally Posted By The_Hammer:
Looks like a LaRue Covert Rifle Case. http://www.larue.com/covert-rifle-case-mkII Originally Posted By The_Hammer:
Originally Posted By mancat:
Originally Posted By pointman12:
This was a trunk gun I had for a while. It was a KAC SR-15 E3 Mod 0 upper, Leupold Mark AR 1.5-4x20, and Anderson lower. http://i.imgur.com/388Hsgn.jpg What is that bag? Looks like a LaRue Covert Rifle Case. http://www.larue.com/covert-rifle-case-mkII Correct--LaRue MkII. Love that case. I've used it for that KAC, my SBR (barely fits fully assembled), and an AMD-65. It' modular, rugged, and doesn't stand out as being a gun bag. |
Filthy sinner saved by grace
"9mm gets the job done!" - Trayvon Martin (GTwannabe)
Follow us on Instagram at tier1_douchebags!
"9mm gets the job done!" - Trayvon Martin (GTwannabe)
Follow us on Instagram at tier1_douchebags!
|
Originally Posted By GunSafe:
http://i1035.photobucket.com/albums/a437/mark356/Mobile%20Uploads/IMG_20150804_183626_zps6trybwp2.jpg http://i1035.photobucket.com/albums/a437/mark356/Mobile%20Uploads/IMG_20150810_1801522_zpsk9yujb0n.jpg If I had enough time http://i1035.photobucket.com/albums/a437/mark356/Mobile%20Uploads/IMG_20151106_1108542_zpszhv6tjk3.jpg Specs? Is that 300blk, 8.5ish barrel? |
Filthy sinner saved by grace
"9mm gets the job done!" - Trayvon Martin (GTwannabe)
Follow us on Instagram at tier1_douchebags!
"9mm gets the job done!" - Trayvon Martin (GTwannabe)
Follow us on Instagram at tier1_douchebags!
|
Originally Posted By DetrhoytMAK:
Home Defense SBR: http://i1155.photobucket.com/albums/p550/Detrhoyt/Guns/20160523_174702_zpsgb4eiaeu.jpg Trunk gun: http://i1155.photobucket.com/albums/p550/Detrhoyt/Guns/20160423_175638_zpszibunl4x.jpg Midlength 16" A2? That's definitely something different--I like it! |
Filthy sinner saved by grace
"9mm gets the job done!" - Trayvon Martin (GTwannabe)
Follow us on Instagram at tier1_douchebags!
"9mm gets the job done!" - Trayvon Martin (GTwannabe)
Follow us on Instagram at tier1_douchebags!
This is the one I've been using for the last 5 years+. I originally built it as a light weight carbine for my wife (hence the iron sights instead of the red-dot). I'm considering swapping out the upper so I can add a micro-dot to it.
|
"with a Big Iron on his hip" - Marty Robbins
|
Originally Posted By Forest:
This is the one I've been using for the last 5 years+. I originally built it as a light weight carbine for my wife (hence the iron sights instead of the red-dot). I'm considering swapping out the upper so I can add a micro-dot to it. <a href="http://s207.photobucket.com/user/mdar15manager/media/Misc/Carbines/0123082327a.jpg.html" target="_blank">http://i207.photobucket.com/albums/bb277/mdar15manager/Misc/Carbines/0123082327a.jpg</a> Have you thought about pushing the light as far forward as possible to minimize barrel shadow? |
Filthy sinner saved by grace
"9mm gets the job done!" - Trayvon Martin (GTwannabe)
Follow us on Instagram at tier1_douchebags!
"9mm gets the job done!" - Trayvon Martin (GTwannabe)
Follow us on Instagram at tier1_douchebags!
|
Originally Posted By pointman12:
Have you thought about pushing the light as far forward as possible to minimize barrel shadow? Originally Posted By pointman12:
Originally Posted By Forest:
This is the one I've been using for the last 5 years+. I originally built it as a light weight carbine for my wife (hence the iron sights instead of the red-dot). I'm considering swapping out the upper so I can add a micro-dot to it. <a href="http://s207.photobucket.com/user/mdar15manager/media/Misc/Carbines/0123082327a.jpg.html" target="_blank">http://i207.photobucket.com/albums/bb277/mdar15manager/Misc/Carbines/0123082327a.jpg</a> Have you thought about pushing the light as far forward as possible to minimize barrel shadow? On my personal carbine it is more forward, but this one can be used either by myself or my wife. As such she can't hold the carbine and operate the light with it forward. At this position either of us can use the magazine well as a VFG and activate the light with our thumb. At the in home distances we have, the shadow really isn't an issue for target ID. |
"with a Big Iron on his hip" - Marty Robbins
|
Originally Posted By pointman12:
Specs? Is that 300blk, 8.5ish barrel? Originally Posted By pointman12:
Originally Posted By GunSafe:
http://i1035.photobucket.com/albums/a437/mark356/Mobile%20Uploads/IMG_20150804_183626_zps6trybwp2.jpg http://i1035.photobucket.com/albums/a437/mark356/Mobile%20Uploads/IMG_20150810_1801522_zpsk9yujb0n.jpg If I had enough time http://i1035.photobucket.com/albums/a437/mark356/Mobile%20Uploads/IMG_20151106_1108542_zpszhv6tjk3.jpg Specs? Is that 300blk, 8.5ish barrel? (Specs as requested) Battle Arms Development billet upper/lower 300 BLK 8.0" Ballistic advantage barrel ALG Defense trigger V seven Dust cover Fortis Rev II key mod rail (7") MVB industries ARC stock Superlative Arms adjustable gas block .750 LPK s built kit of KNS, Norgon, etc ) Silencer co flash hider and 7.62 specwar suppressor |
|
Originally Posted By Forest:
On my personal carbine it is more forward, but this one can be used either by myself or my wife. As such she can't hold the carbine and operate the light with it forward. At this position either of us can use the magazine well as a VFG and activate the light with our thumb. At the in home distances we have, the shadow really isn't an issue for target ID. Originally Posted By Forest:
Originally Posted By pointman12:
Originally Posted By Forest:
This is the one I've been using for the last 5 years+. I originally built it as a light weight carbine for my wife (hence the iron sights instead of the red-dot). I'm considering swapping out the upper so I can add a micro-dot to it. <a href="http://s207.photobucket.com/user/mdar15manager/media/Misc/Carbines/0123082327a.jpg.html" target="_blank">http://i207.photobucket.com/albums/bb277/mdar15manager/Misc/Carbines/0123082327a.jpg</a> Have you thought about pushing the light as far forward as possible to minimize barrel shadow? On my personal carbine it is more forward, but this one can be used either by myself or my wife. As such she can't hold the carbine and operate the light with it forward. At this position either of us can use the magazine well as a VFG and activate the light with our thumb. At the in home distances we have, the shadow really isn't an issue for target ID. Ahh gotcha, fair enough 
|
Filthy sinner saved by grace
"9mm gets the job done!" - Trayvon Martin (GTwannabe)
Follow us on Instagram at tier1_douchebags!
"9mm gets the job done!" - Trayvon Martin (GTwannabe)
Follow us on Instagram at tier1_douchebags!
|
Originally Posted By Rubbergun:
http://s1262.photobucket.com/user/dejeanitunes/media/3F0EA7EE-EF43-44B5-A4E1-66C0D9CB66F5_zps5xesnllu.jpg.html?sort=3&o=0 Colt 14.5 with acog. 
First attempt at posting a picture. I read the tutorial hope this works. You copy the IMG tag and then paste it using the portrait icon.. 
|
Freedom is not Free..
The 2nd Amendment is a RIGHT, not a Privilege...
Gun Gallery 4 Life: "Selling Guns, Changing People's Lives"
The 2nd Amendment is a RIGHT, not a Privilege...
Gun Gallery 4 Life: "Selling Guns, Changing People's Lives"
|
Originally Posted By Rubbergun:
http://s1262.photobucket.com/user/dejeanitunes/media/3F0EA7EE-EF43-44B5-A4E1-66C0D9CB66F5_zps5xesnllu.jpg.html?sort=3&o=0 Colt 14.5 with acog.
First attempt at posting a picture. I read the tutorial hope this works. Why not ditch the carry handle, run a buis and mount the ACOG directly on the receiver? Not trying to be shitty just curious
|
I now have a ban button. Want to see me use it? Keep it up. - Lancelot
You do not fight out of hate, but rather out of the love and compassion you have for those you are trying to protect.
You do not fight out of hate, but rather out of the love and compassion you have for those you are trying to protect.
Summerland Minister of Eating and Drinking.
Joined:
Sep 2008
Posts:
4412
EE: 100% (195)
NC, USA
|
Originally Posted By Rubbergun:
http://s1262.photobucket.com/user/dejeanitunes/media/3F0EA7EE-EF43-44B5-A4E1-66C0D9CB66F5_zps5xesnllu.jpg.html?sort=3&o=0 Colt 14.5 with acog.
First attempt at posting a picture. I read the tutorial hope this works. That's my kind of rifle. Well done. ETA: BP rig? |
|
Originally Posted By The_Hammer:
Why not ditch the carry handle, run a buis and mount the ACOG directly on the receiver? Not trying to be shitty just curious Originally Posted By The_Hammer:
Originally Posted By Rubbergun:
http://s1262.photobucket.com/user/dejeanitunes/media/3F0EA7EE-EF43-44B5-A4E1-66C0D9CB66F5_zps5xesnllu.jpg.html?sort=3&o=0 Colt 14.5 with acog.
First attempt at posting a picture. I read the tutorial hope this works. Why not ditch the carry handle, run a buis and mount the ACOG directly on the receiver? Not trying to be shitty just curious It does make for a handy set up. And you have the irons all ready to go if your scope went tits up or is too much magnification. Although admittedly, I think I'd do what you said with that scope. Curious to see what he has to say. I personally have always liked a higher mount than standard. Most other guns don't have your face as jammed down on the stock as an AR does, to see down the sights. |
|
Originally Posted By DontBuryMe:
This is nearby at night, loaded with 70gr Barnes VOR-TX. http://i.imgur.com/JLGtKI0.jpg I love that set up. A lot. I'm not sure my ears would like it, but probably every other way I would. After trying a few different stocks, I've come to the conclusion an M4 stock is the most practical and comfortable stock to use for anything other than bench shooting. If a precision gun, then give me an A1. I will probably never build a clone or have the money too, but dang I sure like those CQBR's. |
Home Defense/Trunk Gun/Duty AR-15 Picture Thread! (Page 1 of 12)
AR Sponsor