AR Sponsor
Posted: 3/19/2024 2:34:04 PM EDT
[Last Edit: ZA206][Edited]
|
Anyone had accuracy issues with their JAKL? I took my new 13.7" out on Sunday to get it sighted in with a 1-8 NX8 Nightforce. First 10-15 shots were fine, got it rough zero'd & gas settings correct at 50 and moved back to 100 to dial it in. Got it mostly where I wanted and then started shooting some steel. Accuracy dropped off the planet... at the end I couldn't hit a 10" plate from 100 yards with good handloads (that shoot 3/4" groups in some of my AR's). I brought it home and cleaned the heck out of the barrel (had a ton of fouling in it for only shooting maybe 100 rounds). I checked the mount and scope (tight and GTG), I tried to wiggle the barrel and handguard, but they both seemed snug. I'm wondering if the barrel had developed a nasty burr at the gas port or something. That's about the only thing I can think of. Any ideas? @PalmettoStateArmory -ZA |
derp...
|
Originally Posted By ZA206: Anyone had accuracy issues with their JAKL? I took my new 13.7" out on Sunday to get it sighted in with a 1-8 NX8 Nightforce. First 10-15 shots were fine, got it rough zero'd & gas settings correct at 50 and moved back to 100 to dial it in. Got it mostly where I wanted and then started shooting some steel. Accuracy dropped off the planet... at the end I couldn't hit a 10" plate from 100 yards with good handloads (that shoot 3/4" groups in some of my AR's). I brought it home and cleaned the heck out of the barrel (had a ton of fouling in it for only shooting maybe 100 rounds). I checked the mount and scope (tight and GTG), I tried to wiggle the barrel and handguard, but they both seemed snug. I'm wondering if the barrel had developed a nasty burr at the gas port or something. That's about the only thing I can think of. Any ideas? @PalmettoStateArmory -ZA If you would like us to take a look at it, please PM me your order number. Thanks, Josiah |
Palmetto State Armory
3760 Fernandina Rd
Columbia, SC 29210
Web Sales: 1-803-724-6950
3760 Fernandina Rd
Columbia, SC 29210
Web Sales: 1-803-724-6950
|
@PalmettoStateArmory Quick update: Got the JAKL back out today to the range. After about 15 rounds, the gas port burr settled down and the rifle started shooting well. That means I was 15 shots short of not posting this thread after the first range session! ![]() It loved my “blaster” load of mixed range brass, 55 Hornady SPBT and a stout dose of TAC! It was shooting that load into about 1” groups at 100 yards. That made me happy for sure! This might be my softest shooting rifle when it’s suppressed! I need to figure out a good way to memorize which way the gas block works, as I can’t ever seem to remember. |
derp...
AR Sponsor
