User Panel
User Panel
User Panel
|
Posted: 12/2/2015 11:17:08 PM EDT
[#1]
|
|
|
|
USA
|
Posted: 12/3/2015 12:23:28 AM EDT
[#2]
Clone gurus with a KAC 200-600 rear sight, I have a strange dilemma and I'd like your insight. After zeroing today, I ended up having to adjust windage 15 clicks on the knob right to achieve zero. Seemed odd, but OK whatever. Flipped the sight down and it looked like it was smack dab centered on the upper receiver. As a test, I reset the windage to the center tick mark and flipped it back down. It was way left. I guess my assumption was that on the center tick mark, the sight should rest in the middle of the upper receiver.
Thoughts? With the sight aligned in the middle tick mark, the sight rests like this on my upper receiver. 
With the sight zeroed 15 clicks right. 
|
|
|
|
Posted: 12/3/2015 12:26:56 AM EDT
[#3]
Quote HistoryOriginally Posted By byou79:
Clone gurus with a KAC 200-600 rear sight, I have a strange dilemma and I'd like your insight. After zeroing today, I ended up having to adjust windage 15 clicks on the knob right to achieve zero. Seemed odd, but OK whatever. Flipped the sight down and it looked like it was smack dab centered on the upper receiver. As a test, I reset the windage to the center tick mark and flipped it back down. It was way left. I guess my assumption was that on the center tick mark, the sight should rest in the middle of the upper receiver. Thoughts? With the sight aligned in the middle tick mark, the sight rests like this on my upper receiver. http://i64.tinypic.com/nn5v75.jpg With the sight zeroed 15 clicks right. http://i64.tinypic.com/5lt11d.jpg Yeah it's offset. As long as it holds zero now through being flipped down/up, you got nothing to worry about. Sup nape, you know the rules. More pics................. Of the wife unit...... 
|
|
|
|
USA
|
Posted: 12/3/2015 12:43:10 AM EDT
[#4]
Quote HistoryOriginally Posted By MILSPEC556:
Yeah it's offset. As long as it holds zero now through being flipped down/up, you got nothing to worry about. Sup nape, you know the rules. More pics................. Of the wife unit...... Quote HistoryOriginally Posted By MILSPEC556:
Originally Posted By byou79:
Clone gurus with a KAC 200-600 rear sight, I have a strange dilemma and I'd like your insight. After zeroing today, I ended up having to adjust windage 15 clicks on the knob right to achieve zero. Seemed odd, but OK whatever. Flipped the sight down and it looked like it was smack dab centered on the upper receiver. As a test, I reset the windage to the center tick mark and flipped it back down. It was way left. I guess my assumption was that on the center tick mark, the sight should rest in the middle of the upper receiver. Thoughts? With the sight aligned in the middle tick mark, the sight rests like this on my upper receiver. http://i64.tinypic.com/nn5v75.jpg With the sight zeroed 15 clicks right. http://i64.tinypic.com/5lt11d.jpg Yeah it's offset. As long as it holds zero now through being flipped down/up, you got nothing to worry about. Sup nape, you know the rules. More pics................. Of the wife unit...... I see... I wonder why? What happens if I'm shooting zombie hoes and it's fucking windy? |
|
|
|
Posted: 12/3/2015 12:45:04 AM EDT
[#5]
Quote HistoryOriginally Posted By byou79:
I see... I wonder why? What happens if I'm shooting zombie hoes and it's fucking windy? Quote HistoryOriginally Posted By byou79:
Originally Posted By MILSPEC556:
Originally Posted By byou79:
Clone gurus with a KAC 200-600 rear sight, I have a strange dilemma and I'd like your insight. After zeroing today, I ended up having to adjust windage 15 clicks on the knob right to achieve zero. Seemed odd, but OK whatever. Flipped the sight down and it looked like it was smack dab centered on the upper receiver. As a test, I reset the windage to the center tick mark and flipped it back down. It was way left. I guess my assumption was that on the center tick mark, the sight should rest in the middle of the upper receiver. Thoughts? With the sight aligned in the middle tick mark, the sight rests like this on my upper receiver. http://i64.tinypic.com/nn5v75.jpg With the sight zeroed 15 clicks right. http://i64.tinypic.com/5lt11d.jpg Yeah it's offset. As long as it holds zero now through being flipped down/up, you got nothing to worry about. Sup nape, you know the rules. More pics................. Of the wife unit...... I see... I wonder why? What happens if I'm shooting zombie hoes and it's fucking windy? Well, if its fucking windy, that's what Kentucky windage or the 30-06 round is for. 
|
|
|
|
|
Posted: 12/3/2015 2:45:48 PM EDT
[#6]
Top is mine, bottom is SIlkyjohonson's.
|
|
|
|
USA
|
Posted: 12/3/2015 3:56:17 PM EDT
[#7]
Quote HistoryOriginally Posted By DRhodes:
Top is mine, bottom is SIlkyjohonson's. https://scontent-dfw1-1.xx.fbcdn.net/hphotos-xlp1/v/t1.0-9/12313842_10207589327468592_6809513722326569594_n.jpg?oh=95b37a9e9971417c992a2bf0921d8815&oe=56EF3EE6 Damn. Both of those are silky smooth. Good shit. |
|
|
|
Posted: 12/3/2015 4:41:42 PM EDT
[#8]
Popped a yote with this old girl this morning (in my buddies front yard before we even loaded up the truck) then took out the mk12 for a couple of sets after that. Don't make fun of my warden! Buying my socom rc this week! |
|
|
|
|
Posted: 12/3/2015 4:43:05 PM EDT
[#9]
Quote HistoryOriginally Posted By eblack: http://i1349.photobucket.com/albums/p742/SgtUSMCirqafg/99379D6A-3636-47C1-96FD-C086704B5539_zpsvvenpokg.jpg Popped a yote with this old girl this morning (in my buddies front yard before we even loaded up the truck) then took out the mk12 for a couple of sets after that. Don't make fun of my warden! Buying my socom rc this week! |
|
|
|
|
Posted: 12/3/2015 4:44:20 PM EDT
[#10]
Quote HistoryOriginally Posted By eblack:
<a href="http://s1349.photobucket.com/user/SgtUSMCirqafg/media/99379D6A-3636-47C1-96FD-C086704B5539_zpsvvenpokg.jpg.html" target="_blank">http://i1349.photobucket.com/albums/p742/SgtUSMCirqafg/99379D6A-3636-47C1-96FD-C086704B5539_zpsvvenpokg.jpg</a> Popped a yote with this old girl this morning (in my buddies front yard before we even loaded up the truck) then took out the mk12 for a couple of sets after that. Don't make fun of my warden! Buying my socom rc this week! Woah, black Elcan is black. Black DBAL is black. Username is fitting.
|
|
|
|
USA
|
Posted: 12/3/2015 4:48:59 PM EDT
[#11]
Just received a TOPE piece of the puzzle   ...it's coming along nicely  |
|
|
|
Posted: 12/3/2015 4:52:35 PM EDT
[#12]
Quote HistoryOriginally Posted By CloneDiseased: Just received a TOPE piece of the puzzle http://i358.photobucket.com/albums/oo30/emailryandavis/cde48059-adb4-496a-b7bf-d65afa378bcc_zpsah9byfef.jpg ...it's coming along nicely |
|
|
|
|
Posted: 12/3/2015 4:56:59 PM EDT
[#13]
Quote HistoryOriginally Posted By MILSPEC556:
Woah, black Elcan is black. Black DBAL is black. Username is fitting. Quote HistoryOriginally Posted By MILSPEC556:
Originally Posted By eblack:
<a href="http://s1349.photobucket.com/user/SgtUSMCirqafg/media/99379D6A-3636-47C1-96FD-C086704B5539_zpsvvenpokg.jpg.html" target="_blank">http://i1349.photobucket.com/albums/p742/SgtUSMCirqafg/99379D6A-3636-47C1-96FD-C086704B5539_zpsvvenpokg.jpg</a> Popped a yote with this old girl this morning (in my buddies front yard before we even loaded up the truck) then took out the mk12 for a couple of sets after that. Don't make fun of my warden! Buying my socom rc this week! Woah, black Elcan is black. Black DBAL is black. Username is fitting. Ya I don't paint optics anymore, sucks for resale. If you guys have seen my mk12 it's NF stays black as well. Though I did just get in a 3.5-15x50 nxs that was painted that I stripped down. very nice for $900!! |
|
|
|
|
Posted: 12/3/2015 5:06:19 PM EDT
[#14]
Quote HistoryOriginally Posted By eblack: Ya I don't paint optics anymore, sucks for resale. If you guys have seen my mk12 it's NF stays black as well. Though I did just get in a 3.5-15x50 nxs that was painted that I stripped down. very nice for $900!! Quote HistoryOriginally Posted By eblack: Originally Posted By MILSPEC556: Originally Posted By eblack: <a href="http://s1349.photobucket.com/user/SgtUSMCirqafg/media/99379D6A-3636-47C1-96FD-C086704B5539_zpsvvenpokg.jpg.html" target="_blank">http://i1349.photobucket.com/albums/p742/SgtUSMCirqafg/99379D6A-3636-47C1-96FD-C086704B5539_zpsvvenpokg.jpg</a> Popped a yote with this old girl this morning (in my buddies front yard before we even loaded up the truck) then took out the mk12 for a couple of sets after that. Don't make fun of my warden! Buying my socom rc this week! Woah, black Elcan is black. Black DBAL is black. Username is fitting. Ya I don't paint optics anymore, sucks for resale. If you guys have seen my mk12 it's NF stays black as well. Though I did just get in a 3.5-15x50 nxs that was painted that I stripped down. very nice for $900!! |
|
|
|
|
Posted: 12/3/2015 5:17:22 PM EDT
[#15]
Quote HistoryOriginally Posted By secretwheelman:
You wanna make a quick $20.
Quote HistoryOriginally Posted By secretwheelman:
Originally Posted By eblack:
Originally Posted By MILSPEC556:
Originally Posted By eblack:
<a href="http://s1349.photobucket.com/user/SgtUSMCirqafg/media/99379D6A-3636-47C1-96FD-C086704B5539_zpsvvenpokg.jpg.html" target="_blank">http://i1349.photobucket.com/albums/p742/SgtUSMCirqafg/99379D6A-3636-47C1-96FD-C086704B5539_zpsvvenpokg.jpg</a> Popped a yote with this old girl this morning (in my buddies front yard before we even loaded up the truck) then took out the mk12 for a couple of sets after that. Don't make fun of my warden! Buying my socom rc this week! Woah, black Elcan is black. Black DBAL is black. Username is fitting. Ya I don't paint optics anymore, sucks for resale. If you guys have seen my mk12 it's NF stays black as well. Though I did just get in a 3.5-15x50 nxs that was painted that I stripped down. very nice for $900!!
You wouldn't want it, moar reticle and no zero stops  Haven't decided if I should send it in for an update or just run it on my 300wm build, it's 6 months out from being finished so I have time.
|
|
|
|
|
Posted: 12/3/2015 6:59:44 PM EDT
[#16]
Quote HistoryOriginally Posted By eblack: You wouldn't want it, moar reticle and no zero stops Haven't decided if I should send it in for an update or just run it on my 300wm build, it's 6 months out from being finished so I have time.Quote HistoryOriginally Posted By eblack: Originally Posted By secretwheelman: Originally Posted By eblack: Ya I don't paint optics anymore, sucks for resale. If you guys have seen my mk12 it's NF stays black as well. Though I did just get in a 3.5-15x50 nxs that was painted that I stripped down. very nice for $900!! You wouldn't want it, moar reticle and no zero stops Haven't decided if I should send it in for an update or just run it on my 300wm build, it's 6 months out from being finished so I have time. |
|
|
|
|
Posted: 12/3/2015 7:49:53 PM EDT
[#17]
|
|
|
|
|
Posted: 12/3/2015 7:52:25 PM EDT
[#18]
Quote HistoryOriginally Posted By AmericanCheese:
<a href="http://s612.photobucket.com/user/americancheese1/media/2c4344db-3c46-4911-b5fc-ba9dc1f926f0_zpsee2k8rda.jpg.html" target="_blank">http://i612.photobucket.com/albums/tt202/americancheese1/2c4344db-3c46-4911-b5fc-ba9dc1f926f0_zpsee2k8rda.jpg</a> Still need to figure out what I'm putting my TOPE KAC A2 grip on....... (thanks Nick!)
|
|
|
|
|
Posted: 12/3/2015 8:17:40 PM EDT
[#19]
Well, I'm currently reconfiguring all my rifles. A while back I was in a great gun shop a couple of hours away and saw that they had a Daniel Defense m4a1 upper. Ordered a kac lower through them and didn't really think about the upper again until recently. Now, I have a noveske m4a1 that was factory built for gun gallery and it's great, but the DD is more correct. It's the m4 profile barrel instead of the noveske profile midlength. The only thing I'll have to change is the flash hider, but it's not a huge deal. Looks like my noveske will get sold or disassembled and built into something else.
|
|
|
|
|
Posted: 12/3/2015 8:29:43 PM EDT
[#20]
Quote HistoryOriginally Posted By CloneDiseased:
Just received a TOPE piece of the puzzle
<a href="http://s358.photobucket.com/user/emailryandavis/media/cde48059-adb4-496a-b7bf-d65afa378bcc_zpsah9byfef.jpg.html" target="_blank">http://i358.photobucket.com/albums/oo30/emailryandavis/cde48059-adb4-496a-b7bf-d65afa378bcc_zpsah9byfef.jpg</a> ...it's coming along nicely
Delicious! |
|
|
|
|
Posted: 12/4/2015 12:45:31 AM EDT
[#21]
Making some progress to a Cerakote recipe for DD FDE. Getting close!
|
|
|
|
USA
|
Posted: 12/4/2015 12:58:29 AM EDT
[#22]
Quote HistoryOriginally Posted By MILSPEC556:
Yeah it's offset. As long as it holds zero now through being flipped down/up, you got nothing to worry about. Sup nape, you know the rules. More pics................. Of the wife unit...... Quote HistoryOriginally Posted By MILSPEC556:
Originally Posted By byou79:
Clone gurus with a KAC 200-600 rear sight, I have a strange dilemma and I'd like your insight. After zeroing today, I ended up having to adjust windage 15 clicks on the knob right to achieve zero. Seemed odd, but OK whatever. Flipped the sight down and it looked like it was smack dab centered on the upper receiver. As a test, I reset the windage to the center tick mark and flipped it back down. It was way left. I guess my assumption was that on the center tick mark, the sight should rest in the middle of the upper receiver. Thoughts? With the sight aligned in the middle tick mark, the sight rests like this on my upper receiver. http://i64.tinypic.com/nn5v75.jpg With the sight zeroed 15 clicks right. http://i64.tinypic.com/5lt11d.jpg Yeah it's offset. As long as it holds zero now through being flipped down/up, you got nothing to worry about. Sup nape, you know the rules. More pics................. Of the wife unit...... Seriously. Why the fuck is it offset? There has to be a valid reason for it. |
|
|
|
Posted: 12/4/2015 1:01:31 AM EDT
[#23]
Quote HistoryOriginally Posted By CloneDiseased:
Just received a TOPE piece of the puzzle
<a href="http://s358.photobucket.com/user/emailryandavis/media/cde48059-adb4-496a-b7bf-d65afa378bcc_zpsah9byfef.jpg.html" target="_blank">http://i358.photobucket.com/albums/oo30/emailryandavis/cde48059-adb4-496a-b7bf-d65afa378bcc_zpsah9byfef.jpg</a> ...it's coming along nicely
Part spreads are my favorite pics. |
|
|
|
CA, USA
|
Posted: 12/4/2015 1:54:10 AM EDT
[#24]
I just got an elcan that came with an ARD. How often are they use in combat?
|
|
|
CA, USA
|
Posted: 12/4/2015 2:45:36 AM EDT
[#25]
Quote HistoryOriginally Posted By ankratz:
Making some progress to a Cerakote recipe for DD FDE. Getting close! Looking good man! Hope you share the recipe because that's a close looking match! |
|
|
USA
|
Posted: 12/4/2015 5:22:20 AM EDT
[Last Edit: CloneDiseased]
[#26]
Quote HistoryOriginally Posted By ankratz: Making some progress to a Cerakote recipe for DD FDE. Getting close! http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203808_zpscjlq3xke.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203428_zpsxnsc3pvf.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203451_zpsh1rac1qu.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203512_zpsltieykgh.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203521_zpscmzdybrk.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203618_zpsxn8mjxmr.jpg  Edit for the ownage win:  |
|
|
|
Posted: 12/4/2015 5:29:54 AM EDT
[Last Edit: brodband8]
[#27]
Quote HistoryOriginally Posted By CloneDiseased:
Just received a TOPE piece of the puzzle
<a href="http://s358.photobucket.com/user/emailryandavis/media/cde48059-adb4-496a-b7bf-d65afa378bcc_zpsah9byfef.jpg.html" target="_blank">http://i358.photobucket.com/albums/oo30/emailryandavis/cde48059-adb4-496a-b7bf-d65afa378bcc_zpsah9byfef.jpg</a> ...it's coming along nicely
^ Jealous
|
|
|
|
IN, USA
|
Posted: 12/4/2015 8:51:03 AM EDT
[#28]
Quote HistoryOriginally Posted By byou79:
Seriously. Why the fuck is it offset? There has to be a valid reason for it. Quote HistoryOriginally Posted By byou79:
Originally Posted By MILSPEC556:
Originally Posted By byou79:
Clone gurus with a KAC 200-600 rear sight, I have a strange dilemma and I'd like your insight. After zeroing today, I ended up having to adjust windage 15 clicks on the knob right to achieve zero. Seemed odd, but OK whatever. Flipped the sight down and it looked like it was smack dab centered on the upper receiver. As a test, I reset the windage to the center tick mark and flipped it back down. It was way left. I guess my assumption was that on the center tick mark, the sight should rest in the middle of the upper receiver. Thoughts? With the sight aligned in the middle tick mark, the sight rests like this on my upper receiver. http://i64.tinypic.com/nn5v75.jpg With the sight zeroed 15 clicks right. http://i64.tinypic.com/5lt11d.jpg Yeah it's offset. As long as it holds zero now through being flipped down/up, you got nothing to worry about. Sup nape, you know the rules. More pics................. Of the wife unit...... Seriously. Why the fuck is it offset? There has to be a valid reason for it. The M1913 rail width only has a +- .002" tolerance so either your rail or your sight are out of spec. |
|
|
|
Posted: 12/4/2015 11:07:10 AM EDT
[#29]
Quote HistoryOriginally Posted By MILSPEC556:
Yeah it's offset. As long as it holds zero now through being flipped down/up, you got nothing to worry about. Sup nape, you know the rules. More pics................. Of the wife unit...... Quote HistoryOriginally Posted By MILSPEC556:
Originally Posted By byou79:
Clone gurus with a KAC 200-600 rear sight, I have a strange dilemma and I'd like your insight. After zeroing today, I ended up having to adjust windage 15 clicks on the knob right to achieve zero. Seemed odd, but OK whatever. Flipped the sight down and it looked like it was smack dab centered on the upper receiver. As a test, I reset the windage to the center tick mark and flipped it back down. It was way left. I guess my assumption was that on the center tick mark, the sight should rest in the middle of the upper receiver. Thoughts? With the sight aligned in the middle tick mark, the sight rests like this on my upper receiver. http://i64.tinypic.com/nn5v75.jpg With the sight zeroed 15 clicks right. http://i64.tinypic.com/5lt11d.jpg Yeah it's offset. As long as it holds zero now through being flipped down/up, you got nothing to worry about. Sup nape, you know the rules. More pics................. Of the wife unit...... Don't mention her stance. I've tried to mentor her and get told to shut up. Despite her horrible stance she is a good shot so I have to watch what I say. 
A couple that shoots together stays tog....or the husband gets murdered in his sleep for correcting his wife's stance. 
|
|
|
|
USA
|
Posted: 12/4/2015 12:04:38 PM EDT
[#30]
Quote HistoryOriginally Posted By pezboytate:
The M1913 rail width only has a +- .002" tolerance so either your rail or your sight are out of spec. Quote HistoryOriginally Posted By pezboytate:
Originally Posted By byou79:
Originally Posted By MILSPEC556:
Originally Posted By byou79:
Clone gurus with a KAC 200-600 rear sight, I have a strange dilemma and I'd like your insight. After zeroing today, I ended up having to adjust windage 15 clicks on the knob right to achieve zero. Seemed odd, but OK whatever. Flipped the sight down and it looked like it was smack dab centered on the upper receiver. As a test, I reset the windage to the center tick mark and flipped it back down. It was way left. I guess my assumption was that on the center tick mark, the sight should rest in the middle of the upper receiver. Thoughts? With the sight aligned in the middle tick mark, the sight rests like this on my upper receiver. http://i64.tinypic.com/nn5v75.jpg With the sight zeroed 15 clicks right. http://i64.tinypic.com/5lt11d.jpg Yeah it's offset. As long as it holds zero now through being flipped down/up, you got nothing to worry about. Sup nape, you know the rules. More pics................. Of the wife unit...... Seriously. Why the fuck is it offset? There has to be a valid reason for it. The M1913 rail width only has a +- .002" tolerance so either your rail or your sight are out of spec. Hmmm... Did you see my pics? Based on milspecs comment, I thought they are intended to be offset. That's why in asking why. It's annoying the shit out of me. |
|
|
|
Posted: 12/4/2015 12:09:52 PM EDT
[#31]
Quote HistoryOriginally Posted By byou79:
Hmmm... Did you see my pics? Based on milspecs comment, I thought they are intended to be offset. That's why in asking why. It's annoying the shit out of me. Quote HistoryOriginally Posted By byou79:
Originally Posted By pezboytate:
Originally Posted By byou79:
Originally Posted By MILSPEC556:
Originally Posted By byou79:
Clone gurus with a KAC 200-600 rear sight, I have a strange dilemma and I'd like your insight. After zeroing today, I ended up having to adjust windage 15 clicks on the knob right to achieve zero. Seemed odd, but OK whatever. Flipped the sight down and it looked like it was smack dab centered on the upper receiver. As a test, I reset the windage to the center tick mark and flipped it back down. It was way left. I guess my assumption was that on the center tick mark, the sight should rest in the middle of the upper receiver. Thoughts? With the sight aligned in the middle tick mark, the sight rests like this on my upper receiver. http://i64.tinypic.com/nn5v75.jpg With the sight zeroed 15 clicks right. http://i64.tinypic.com/5lt11d.jpg Yeah it's offset. As long as it holds zero now through being flipped down/up, you got nothing to worry about. Sup nape, you know the rules. More pics................. Of the wife unit...... Seriously. Why the fuck is it offset? There has to be a valid reason for it. The M1913 rail width only has a +- .002" tolerance so either your rail or your sight are out of spec. Hmmm... Did you see my pics? Based on milspecs comment, I thought they are intended to be offset. That's why in asking why. It's annoying the shit out of me. I'm pretty sure its meant to be offset. Look at the markings, they are more left on the receiver than centered. |
|
|
|
USA
|
Posted: 12/4/2015 12:52:27 PM EDT
[#32]
Quote HistoryOriginally Posted By brodband8: ^ Jealous Quote HistoryOriginally Posted By brodband8: Originally Posted By CloneDiseased: Just received a TOPE piece of the puzzle <a href="http://s358.photobucket.com/user/emailryandavis/media/cde48059-adb4-496a-b7bf-d65afa378bcc_zpsah9byfef.jpg.html" target="_blank">http://i358.photobucket.com/albums/oo30/emailryandavis/cde48059-adb4-496a-b7bf-d65afa378bcc_zpsah9byfef.jpg</a> ...it's coming along nicely ^ Jealous |
|
|
|
Posted: 12/4/2015 3:22:38 PM EDT
[#33]
Quote HistoryOriginally Posted By NapeSticksToKids:
Don't mention her stance. I've tried to mentor her and get told to shut up. Despite her horrible stance she is a good shot so I have to watch what I say. <a href="http://s744.photobucket.com/user/napearfcom/media/Forum%20Shit/BB4F628A-F844-4D43-8FC8-D3D0959475F7_zps14l4clda.jpg.html" target="_blank">http://i744.photobucket.com/albums/xx81/napearfcom/Forum%20Shit/BB4F628A-F844-4D43-8FC8-D3D0959475F7_zps14l4clda.jpg</a> <a href="http://s744.photobucket.com/user/napearfcom/media/Forum%20Shit/18A908CF-B4CA-4626-8443-B14CF0BA7B02_zps5hzyswv8.jpg.html" target="_blank">http://i744.photobucket.com/albums/xx81/napearfcom/Forum%20Shit/18A908CF-B4CA-4626-8443-B14CF0BA7B02_zps5hzyswv8.jpg</a> <a href="http://s744.photobucket.com/user/napearfcom/media/Forum%20Shit/5336F628-81F6-45A8-907D-496874D363DF_zpspom9oxnr.png.html" target="_blank">http://i744.photobucket.com/albums/xx81/napearfcom/Forum%20Shit/5336F628-81F6-45A8-907D-496874D363DF_zpspom9oxnr.png</a> A couple that shoots together stays tog....or the husband gets murdered in his sleep for correcting his wife's stance. https://scontent-ord1-1.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/fr/cp0/e15/q65/12274418_10205010048397639_7183978682395072300_n.jpg?efg=eyJpIjoidCJ9&oh=33630ca5b09feac819e70ec0fb0bae27&oe=56EF4018 <a href="http://s744.photobucket.com/user/napearfcom/media/Forum%20Shit/F8C5A5F9-15FF-41F9-8D9C-5E126599C5B5_zpsppbi1jmf.jpg.html" target="_blank">http://i744.photobucket.com/albums/xx81/napearfcom/Forum%20Shit/F8C5A5F9-15FF-41F9-8D9C-5E126599C5B5_zpsppbi1jmf.jpg</a> Quote HistoryOriginally Posted By NapeSticksToKids:
Originally Posted By MILSPEC556:
Originally Posted By byou79:
Clone gurus with a KAC 200-600 rear sight, I have a strange dilemma and I'd like your insight. After zeroing today, I ended up having to adjust windage 15 clicks on the knob right to achieve zero. Seemed odd, but OK whatever. Flipped the sight down and it looked like it was smack dab centered on the upper receiver. As a test, I reset the windage to the center tick mark and flipped it back down. It was way left. I guess my assumption was that on the center tick mark, the sight should rest in the middle of the upper receiver. Thoughts? With the sight aligned in the middle tick mark, the sight rests like this on my upper receiver. http://i64.tinypic.com/nn5v75.jpg With the sight zeroed 15 clicks right. http://i64.tinypic.com/5lt11d.jpg Yeah it's offset. As long as it holds zero now through being flipped down/up, you got nothing to worry about. Sup nape, you know the rules. More pics................. Of the wife unit...... Don't mention her stance. I've tried to mentor her and get told to shut up. Despite her horrible stance she is a good shot so I have to watch what I say. <a href="http://s744.photobucket.com/user/napearfcom/media/Forum%20Shit/BB4F628A-F844-4D43-8FC8-D3D0959475F7_zps14l4clda.jpg.html" target="_blank">http://i744.photobucket.com/albums/xx81/napearfcom/Forum%20Shit/BB4F628A-F844-4D43-8FC8-D3D0959475F7_zps14l4clda.jpg</a> <a href="http://s744.photobucket.com/user/napearfcom/media/Forum%20Shit/18A908CF-B4CA-4626-8443-B14CF0BA7B02_zps5hzyswv8.jpg.html" target="_blank">http://i744.photobucket.com/albums/xx81/napearfcom/Forum%20Shit/18A908CF-B4CA-4626-8443-B14CF0BA7B02_zps5hzyswv8.jpg</a> <a href="http://s744.photobucket.com/user/napearfcom/media/Forum%20Shit/5336F628-81F6-45A8-907D-496874D363DF_zpspom9oxnr.png.html" target="_blank">http://i744.photobucket.com/albums/xx81/napearfcom/Forum%20Shit/5336F628-81F6-45A8-907D-496874D363DF_zpspom9oxnr.png</a> A couple that shoots together stays tog....or the husband gets murdered in his sleep for correcting his wife's stance. https://scontent-ord1-1.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/fr/cp0/e15/q65/12274418_10205010048397639_7183978682395072300_n.jpg?efg=eyJpIjoidCJ9&oh=33630ca5b09feac819e70ec0fb0bae27&oe=56EF4018 <a href="http://s744.photobucket.com/user/napearfcom/media/Forum%20Shit/F8C5A5F9-15FF-41F9-8D9C-5E126599C5B5_zpsppbi1jmf.jpg.html" target="_blank">http://i744.photobucket.com/albums/xx81/napearfcom/Forum%20Shit/F8C5A5F9-15FF-41F9-8D9C-5E126599C5B5_zpsppbi1jmf.jpg</a> Ok, that actually is a terrible stance.
Show your dominance nape! Don't let her push you around. "Gun" on the bottom is finished now too. 
|
|
|
|
|
Posted: 12/4/2015 3:25:36 PM EDT
[#34]
Quote HistoryOriginally Posted By CloneDiseased:
Wow, that's damn close. How much are you charging per rail!?
Edit for the ownage win: <a href="http://s358.photobucket.com/user/emailryandavis/media/black20and20white_zpsl6kumvsl.jpg.html" target="_blank">http://i358.photobucket.com/albums/oo30/emailryandavis/black20and20white_zpsl6kumvsl.jpg</a> Quote HistoryOriginally Posted By CloneDiseased:
Originally Posted By ankratz:
Making some progress to a Cerakote recipe for DD FDE. Getting close! http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203808_zpscjlq3xke.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203428_zpsxnsc3pvf.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203451_zpsh1rac1qu.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203512_zpsltieykgh.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203521_zpscmzdybrk.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203618_zpsxn8mjxmr.jpg
Edit for the ownage win: <a href="http://s358.photobucket.com/user/emailryandavis/media/black20and20white_zpsl6kumvsl.jpg.html" target="_blank">http://i358.photobucket.com/albums/oo30/emailryandavis/black20and20white_zpsl6kumvsl.jpg</a> For those interested, Email me. I think you sent me an IM and I responded |
|
|
|
|
Posted: 12/4/2015 3:34:47 PM EDT
[#35]
Quote HistoryOriginally Posted By ankratz:
For those interested, Email me. I think you sent me an IM and I responded Quote HistoryOriginally Posted By ankratz:
Originally Posted By CloneDiseased:
Originally Posted By ankratz:
Making some progress to a Cerakote recipe for DD FDE. Getting close! http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203808_zpscjlq3xke.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203428_zpsxnsc3pvf.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203451_zpsh1rac1qu.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203512_zpsltieykgh.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203521_zpscmzdybrk.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203618_zpsxn8mjxmr.jpg
Edit for the ownage win: <a href="http://s358.photobucket.com/user/emailryandavis/media/black20and20white_zpsl6kumvsl.jpg.html" target="_blank">http://i358.photobucket.com/albums/oo30/emailryandavis/black20and20white_zpsl6kumvsl.jpg</a> For those interested, Email me. I think you sent me an IM and I responded I have a black DD RIS II FSP M4A1 rail arriving today in the mail.......If I could find a machinist to do a professional quality cut down on it, I'd get this redone in FDE for a Block II FSP 10.3 upper in a heartbeat! |
|
|
|
|
Posted: 12/4/2015 4:05:24 PM EDT
[#36]
Quote HistoryOriginally Posted By fastfoot:
I have a black DD RIS II FSP M4A1 rail arriving today in the mail.......If I could find a machinist to do a professional quality cut down on it, I'd get this redone in FDE for a Block II FSP 10.3 upper in a heartbeat! Quote HistoryOriginally Posted By fastfoot:
Originally Posted By ankratz:
Originally Posted By CloneDiseased:
Originally Posted By ankratz:
Making some progress to a Cerakote recipe for DD FDE. Getting close! http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203808_zpscjlq3xke.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203428_zpsxnsc3pvf.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203451_zpsh1rac1qu.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203512_zpsltieykgh.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203521_zpscmzdybrk.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203618_zpsxn8mjxmr.jpg
Edit for the ownage win: <a href="http://s358.photobucket.com/user/emailryandavis/media/black20and20white_zpsl6kumvsl.jpg.html" target="_blank">http://i358.photobucket.com/albums/oo30/emailryandavis/black20and20white_zpsl6kumvsl.jpg</a> For those interested, Email me. I think you sent me an IM and I responded I have a black DD RIS II FSP M4A1 rail arriving today in the mail.......If I could find a machinist to do a professional quality cut down on it, I'd get this redone in FDE for a Block II FSP 10.3 upper in a heartbeat! Foot, check out the MK18 thread. It may have what you seek... |
|
|
|
IN, USA
|
Posted: 12/4/2015 6:18:22 PM EDT
[#37]
Quote HistoryOriginally Posted By byou79:
Hmmm... Did you see my pics? Based on milspecs comment, I thought they are intended to be offset. That's why in asking why. It's annoying the shit out of me. Quote HistoryOriginally Posted By byou79:
Originally Posted By pezboytate:
Originally Posted By byou79:
Originally Posted By MILSPEC556:
Originally Posted By byou79:
Clone gurus with a KAC 200-600 rear sight, I have a strange dilemma and I'd like your insight. After zeroing today, I ended up having to adjust windage 15 clicks on the knob right to achieve zero. Seemed odd, but OK whatever. Flipped the sight down and it looked like it was smack dab centered on the upper receiver. As a test, I reset the windage to the center tick mark and flipped it back down. It was way left. I guess my assumption was that on the center tick mark, the sight should rest in the middle of the upper receiver. Thoughts? With the sight aligned in the middle tick mark, the sight rests like this on my upper receiver. http://i64.tinypic.com/nn5v75.jpg With the sight zeroed 15 clicks right. http://i64.tinypic.com/5lt11d.jpg Yeah it's offset. As long as it holds zero now through being flipped down/up, you got nothing to worry about. Sup nape, you know the rules. More pics................. Of the wife unit...... Seriously. Why the fuck is it offset? There has to be a valid reason for it. The M1913 rail width only has a +- .002" tolerance so either your rail or your sight are out of spec. Hmmm... Did you see my pics? Based on milspecs comment, I thought they are intended to be offset. That's why in asking why. It's annoying the shit out of me. Why would they not put the center mark in the center of the rail? Like I said, it should be within .002". One thing I have noticed is their folding front sights are usually off to one side making you adjust the rear a bit to zero. Maybe they all are off a little bit. Anyway, odds of being exactly in the center after zeroing is slim. It is that way with all AR15 sights. |
|
|
|
Posted: 12/4/2015 7:49:22 PM EDT
[#38]
Quote HistoryOriginally Posted By fastfoot:
I have a black DD RIS II FSP M4A1 rail arriving today in the mail.......If I could find a machinist to do a professional quality cut down on it, I'd get this redone in FDE for a Block II FSP 10.3 upper in a heartbeat! Quote HistoryOriginally Posted By fastfoot:
Originally Posted By ankratz:
Originally Posted By CloneDiseased:
Originally Posted By ankratz:
Making some progress to a Cerakote recipe for DD FDE. Getting close! http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203808_zpscjlq3xke.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203428_zpsxnsc3pvf.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203451_zpsh1rac1qu.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203512_zpsltieykgh.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203521_zpscmzdybrk.jpg http://i6.photobucket.com/albums/y229/akratz/ARFCOM/20151203_203618_zpsxn8mjxmr.jpg
Edit for the ownage win: <a href="http://s358.photobucket.com/user/emailryandavis/media/black20and20white_zpsl6kumvsl.jpg.html" target="_blank">http://i358.photobucket.com/albums/oo30/emailryandavis/black20and20white_zpsl6kumvsl.jpg</a> For those interested, Email me. I think you sent me an IM and I responded I have a black DD RIS II FSP M4A1 rail arriving today in the mail.......If I could find a machinist to do a professional quality cut down on it, I'd get this redone in FDE for a Block II FSP 10.3 upper in a heartbeat! I'm sure the MK18 guys will get you straightened out. You may also check a local fab/welding shop. Run that sucker through a band saw and you can finish the work yourself with a file easily. |
|
|
|
USA
|
Posted: 12/5/2015 12:30:58 AM EDT
[#39]
Quote HistoryHmmm... Did you see my pics? Based on milspecs comment, I thought they are intended to be offset. That's why in asking why. It's annoying the shit out of me. Your guess is as good as mine. I'm hoping more people with KAC 200-600 rear sights might chime in so I can determine if I have a shitty one, or if its truly "normal". Quote HistoryThe M1913 rail width only has a +- .002" tolerance so either your rail or your sight are out of spec. Hmmm... Did you see my pics? Based on milspecs comment, I thought they are intended to be offset. That's why in asking why. It's annoying the shit out of me. Why would they not put the center mark in the center of the rail? Like I said, it should be within .002". One thing I have noticed is their folding front sights are usually off to one side making you adjust the rear a bit to zero. Maybe they all are off a little bit. Anyway, odds of being exactly in the center after zeroing is slim. It is that way with all AR15 sights. Your guess is as good as mine. I'm hoping more people with KAC 200-600 rear sights might chime in so I can determine if I have a shitty one, or if its truly "normal". |
|
|
CA, USA
|
Posted: 12/5/2015 5:57:39 PM EDT
[#40]
Question... I am thinking about putting an MRD plate and a Burris FFII on my Ecan SpecterDR. Is installation pretty straight forward? Is this a solid setup? Thanks fellas!
|
|
|
|
Posted: 12/5/2015 9:22:57 PM EDT
[#41]
Anyone looking to get into a Colt FSP Block 2 upper? I'll give a special deal to regular suspects here in the forum
|
|
|
|
|
Posted: 12/5/2015 10:37:13 PM EDT
[#42]
Posted my other Noveske upper in the ee in the trade section. Got to make room for the Daniel Defense upper.
|
|
|
|
|
Posted: 12/6/2015 1:46:27 AM EDT
[#43]
Quote HistoryOriginally Posted By FCOD:
Question... I am thinking about putting an MRD plate and a Burris FFII on my Ecan SpecterDR. Is installation pretty straight forward? Is this a solid setup? Thanks fellas! yes |
|
|
|
CA, USA
|
Posted: 12/6/2015 10:49:20 AM EDT
[#44]
Quote HistoryOriginally Posted By FCOD:
Question... I am thinking about putting an MRD plate and a Burris FFII on my Ecan SpecterDR. Is installation pretty straight forward? Is this a solid setup? Thanks fellas! Please post a review when you get it set up! |
|
|
|
Posted: 12/6/2015 1:18:50 PM EDT
[Last Edit: Combat_Diver]
[#45]
Built the middle upper today with a Govt profile 14.5" bbl. Top has a SOCOM 14.5" bbl, bottom has a 10.3" Govt profile bbl. All barrels are Colt 1/7. Of course the BCG is inside the receivers, head spaced.
CD |
|
|
|
|
Posted: 12/6/2015 2:27:37 PM EDT
[#46]
Quote HistoryOriginally Posted By Bohguy:
Anyone looking to get into a Colt FSP Block 2 upper? I'll give a special deal to regular suspects here in the forum I might be interested. What do you have?
|
|
|
|
CA, USA
|
Posted: 12/6/2015 3:07:42 PM EDT
[Last Edit: Spectre186]
[#47]
|
|
|
MI, USA
|
Posted: 12/6/2015 3:46:14 PM EDT
[#48]
Quote HistoryOriginally Posted By NapeSticksToKids: Don't mention her stance. I've tried to mentor her and get told to shut up. Despite her horrible stance she is a good shot so I have to watch what I say. http://i744.photobucket.com/albums/xx81/napearfcom/Forum%20Shit/BB4F628A-F844-4D43-8FC8-D3D0959475F7_zps14l4clda.jpg http://i744.photobucket.com/albums/xx81/napearfcom/Forum%20Shit/18A908CF-B4CA-4626-8443-B14CF0BA7B02_zps5hzyswv8.jpg http://i744.photobucket.com/albums/xx81/napearfcom/Forum%20Shit/5336F628-81F6-45A8-907D-496874D363DF_zpspom9oxnr.png A couple that shoots together stays tog....or the husband gets murdered in his sleep for correcting his wife's stance. https://scontent-ord1-1.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/fr/cp0/e15/q65/12274418_10205010048397639_7183978682395072300_n.jpg?efg=eyJpIjoidCJ9&oh=33630ca5b09feac819e70ec0fb0bae27&oe=56EF4018 http://i744.photobucket.com/albums/xx81/napearfcom/Forum%20Shit/F8C5A5F9-15FF-41F9-8D9C-5E126599C5B5_zpsppbi1jmf.jpg Quote HistoryOriginally Posted By NapeSticksToKids: Originally Posted By MILSPEC556: Originally Posted By byou79: Clone gurus with a KAC 200-600 rear sight, I have a strange dilemma and I'd like your insight. After zeroing today, I ended up having to adjust windage 15 clicks on the knob right to achieve zero. Seemed odd, but OK whatever. Flipped the sight down and it looked like it was smack dab centered on the upper receiver. As a test, I reset the windage to the center tick mark and flipped it back down. It was way left. I guess my assumption was that on the center tick mark, the sight should rest in the middle of the upper receiver. Thoughts? With the sight aligned in the middle tick mark, the sight rests like this on my upper receiver. http://i64.tinypic.com/nn5v75.jpg With the sight zeroed 15 clicks right. http://i64.tinypic.com/5lt11d.jpg Yeah it's offset. As long as it holds zero now through being flipped down/up, you got nothing to worry about. Sup nape, you know the rules. More pics................. Of the wife unit...... Don't mention her stance. I've tried to mentor her and get told to shut up. Despite her horrible stance she is a good shot so I have to watch what I say. http://i744.photobucket.com/albums/xx81/napearfcom/Forum%20Shit/BB4F628A-F844-4D43-8FC8-D3D0959475F7_zps14l4clda.jpg http://i744.photobucket.com/albums/xx81/napearfcom/Forum%20Shit/18A908CF-B4CA-4626-8443-B14CF0BA7B02_zps5hzyswv8.jpg http://i744.photobucket.com/albums/xx81/napearfcom/Forum%20Shit/5336F628-81F6-45A8-907D-496874D363DF_zpspom9oxnr.png A couple that shoots together stays tog....or the husband gets murdered in his sleep for correcting his wife's stance. https://scontent-ord1-1.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/fr/cp0/e15/q65/12274418_10205010048397639_7183978682395072300_n.jpg?efg=eyJpIjoidCJ9&oh=33630ca5b09feac819e70ec0fb0bae27&oe=56EF4018 http://i744.photobucket.com/albums/xx81/napearfcom/Forum%20Shit/F8C5A5F9-15FF-41F9-8D9C-5E126599C5B5_zpsppbi1jmf.jpg Jesus, what is your wife like half your age?! Nice! |
|
|
|
Posted: 12/7/2015 3:22:02 AM EDT
[Last Edit: gaston4]
[#49]
|
|
|
|
|
Posted: 12/7/2015 4:45:33 AM EDT
[#50]
Quote HistoryWhat all do I need to mount a Dr sight like that? And which Dr sight is clone correct? |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
