AR Sponsor
Mk 18 / CQBR (Page 1247 of 1609)
|
Originally Posted By Dyzastr:
Not cool. Not even close. To change the subject... Should I keep the surefire on and sell the tan led m3x, or use the m3x and sell the surefire? http://i.imgur.com/KwzQu6s.jpg |
|
Originally Posted By Dyzastr:
Not cool. Not even close. To change the subject... Should I keep the surefire on and sell the tan led m3x, or use the m3x and sell the surefire? http://i.imgur.com/KwzQu6s.jpg Originally Posted By Dyzastr:
Originally Posted By MILSPEC556:
Originally Posted By Dyzastr:
I wasn't sure if this was real or a joke. And I wasnt sure if he just admitted to ripping someone off with a knock-off 4p when the prices were really high? That and why would anyone come into this thread to essentially brag about a knock-off part. We spend lots of time and money tracking down the hard to find authentic parts. Wrong thread buddy.  To change the subject... Should I keep the surefire on and sell the tan led m3x, or use the m3x and sell the surefire? http://i.imgur.com/KwzQu6s.jpg |
Without blood, it doesn't count!
"A gun, like any other source of power, is a force for good or evil, being neither in itself, but dependent upon those who possess it."
"A gun, like any other source of power, is a force for good or evil, being neither in itself, but dependent upon those who possess it."
|
Originally Posted By Dyzastr:
Not cool. Not even close. To change the subject... Should I keep the surefire on and sell the tan led m3x, or use the m3x and sell the surefire? http://i.imgur.com/KwzQu6s.jpg |
|
Well, that was unanimous. Surefire it is. I thought for sure the m3x would get at least one vote. Why no one like the m3x? To be honest, I like both, but I figured the m3x bein more clone correct would've been most ppls choice. Then again most everyone here is SF biased.
|
You must be at least this tall to read this.
|
Originally Posted By ECPrevatte:
You should think it's stupid, because it is. Because some people are too cheap they sought after a company to knock off another company's product. Then, like anyone with half a brain could have seen coming, it would lead to people being scammed thinking they were buying real made firearm parts. I guess I shouldn't complain, I bought my first two SF 4P's for $85.00 each sold one for $175.00 and the second one for $275.00?. I also paid $300.00 for my WMX2000 and sold it for like $850.00. |
|
Originally Posted By MILSPEC556:
He did the same thing with an air soft 99051 a few years ago. I should dig those out and watch heads explode again! ;) |
|
Originally Posted By Roadblock:
The most important part of cloning is over paying for things so you can impress people on forums and Facebook! I guess I shouldn't complain, I bought my first two SF 4P's for $85.00 each sold one for $175.00 and the second one for $275.00?. I also paid $300.00 for my WMX2000 and sold it for like $850.00. Originally Posted By Roadblock:
Originally Posted By ECPrevatte:
You should think it's stupid, because it is. Because some people are too cheap they sought after a company to knock off another company's product. Then, like anyone with half a brain could have seen coming, it would lead to people being scammed thinking they were buying real made firearm parts. I guess I shouldn't complain, I bought my first two SF 4P's for $85.00 each sold one for $175.00 and the second one for $275.00?. I also paid $300.00 for my WMX2000 and sold it for like $850.00. |
Who said that?
|
Its crazy how much these go for used these days. A $100 stock that probably costed Colt bout tree fiddy to produce
|
I survived the California MagRush 3/29/19 - 4/5/19
|
I rather have my Brownells / B5 car stock 
|
|
Originally Posted By MILSPEC556:
Its crazy how much these go for used these days. A $100 stock that probably costed Colt bout tree fiddy to produce |
One more beer won't hurt
|
Originally Posted By DoctorLove: I am surprised Brownells doesn’t make a re pop of this. Collectors and cloners will pay some crazy prices. I looked at some of the prices at Charlie’s and couldn’t believe what they want for their stuff. Hard pass https://www.brownells.com/rifle-parts/stock-parts/buttstocks/car-15-buttstock-mil-spec-prod128538.aspx |
|
Originally Posted By UndrGrndPrdcts: Doesn't this qualify? It was discussed a few pages back I think. https://www.brownells.com/rifle-parts/stock-parts/buttstocks/car-15-buttstock-mil-spec-prod128538.aspx |
One more beer won't hurt
|
Originally Posted By DoctorLove:
I am surprised Brownells doesn’t make a re pop of this. Collectors and cloners will pay some crazy prices. I looked at some of the prices at Charlie’s and couldn’t believe what they want for their stuff. Hard pass Originally Posted By DoctorLove:
Originally Posted By MILSPEC556:
Its crazy how much these go for used these days. A $100 stock that probably costed Colt bout tree fiddy to produce |
Practice, the master of all things. - Augustus
|
Hey MK18 gurus. Is this priced right? I'm going to be jumping into the clone game and want to make the first right purchase. Any help is appreciated. Hope this post is ok.
https://www.ar15.com/forums/equipment-exchange/WTS-MK18-CQBR-Upper/159-1892938/?r=-1&page=1&anc=5531358#i5531358 |
|
Originally Posted By krdt:
That's cause Charlie's is the SAW of clone parts, lol. Originally Posted By krdt:
Originally Posted By DoctorLove:
Originally Posted By MILSPEC556:
Its crazy how much these go for used these days. A $100 stock that probably costed Colt bout tree fiddy to produce 
|
I survived the California MagRush 3/29/19 - 4/5/19
|
Originally Posted By JHFerero:
Hey MK18 gurus. Is this priced right? I'm going to be jumping into the clone game and want to make the first right purchase. Any help is appreciated. Hope this post is ok. https://www.ar15.com/forums/equipment-exchange/WTS-MK18-CQBR-Upper/159-1892938/?r=-1&page=1&anc=5531358#i5531358 |
|
Originally Posted By JHFerero:
Hey MK18 gurus. Is this priced right? I'm going to be jumping into the clone game and want to make the first right purchase. Any help is appreciated. Hope this post is ok. https://www.ar15.com/forums/equipment-exchange/WTS-MK18-CQBR-Upper/159-1892938/?r=-1&page=1&anc=5531358#i5531358 |
|
Originally Posted By brodband8: It's not a terrible deal. The rail alone is like 400 bucks. Colt keyhole upper is 150 easily. DD 10.3 barrel is 225ish. nt4 mount is roughly 80 or so. Also comes with gas block and gas tube, prob 60 bucks easy. |
|
Originally Posted By JHFerero:
Hey MK18 gurus. Is this priced right? I'm going to be jumping into the clone game and want to make the first right purchase. Any help is appreciated. Hope this post is ok. https://www.ar15.com/forums/equipment-exchange/WTS-MK18-CQBR-Upper/159-1892938/?r=-1&page=1&anc=5531358#i5531358 Originally Posted By MILSPEC556:
But multiply the shadiness by about tree fiddy https://i.imgur.com/CKxbwbt.jpg |
Practice, the master of all things. - Augustus
|
Originally Posted By DoctorLove:
SAW? When I see SAW I think of the 249 Originally Posted By DoctorLove:
Originally Posted By krdt: That's cause Charlie's is the SAW of clone parts, lol. |
Practice, the master of all things. - Augustus
|
Originally Posted By DoctorLove:
SAW? When I see SAW I think of the 249 Originally Posted By DoctorLove:
Originally Posted By krdt: That's cause Charlie's is the SAW of clone parts, lol. |
I survived the California MagRush 3/29/19 - 4/5/19
|
Originally Posted By brodband8:
You are overpaying by about 400 dollars lol. Unless you think aftermarket colt engravings magically add value. Originally Posted By brodband8:
Originally Posted By 100roundclipazine:
SAW is ridiculous... $700 for a colt barrel assembly... lol ok |
I survived the California MagRush 3/29/19 - 4/5/19
|
Originally Posted By brodband8: You are overpaying by about 400 dollars lol. Unless you think aftermarket colt engravings magically add value. |
"That's my secret cap, I'm always drunk"
|
Originally Posted By MILSPEC556:
More like 450 Originally Posted By MILSPEC556:
Originally Posted By brodband8:
Originally Posted By 100roundclipazine:
SAW is ridiculous... $700 for a colt barrel assembly... lol ok Don't forget it comes with their "reliability package"! You get to pay $200 extra for them to give you an oversized gas port, lol. |
Practice, the master of all things. - Augustus
|
Originally Posted By krdt: They're currently charging $450 for a Colt 10.3" barrel assembly. Or is that what you meant? Don't forget it comes with their "reliability package"! You get to pay $200 extra for them to give you an oversized gas port, lol. 
|
"That's my secret cap, I'm always drunk"
|
Originally Posted By krdt: They're currently charging $450 for a Colt 10.3" barrel assembly. Or is that what you meant? Don't forget it comes with their "reliability package"! You get to pay $200 extra for them to give you an oversized gas port, lol. |
|
Originally Posted By krdt:
http://wkd.site.nfoservers.com/CQBR/CQBR.072219.Old.Ranch.Door-08.jpg |
|
There weren't 10.3" factory barrels with FSBs about 5 years ago that were Colts. I ended up paying like $600 for the SAW one. These other few vendors who have gotten factory barrels are nice, but not something that was always around. I also had chopped 10.3" barrels when I bought my SAW one, but I wanted to have one for the hell of it. |
|
Originally Posted By ECPrevatte:
There weren't 10.3" factory barrels with FSBs about 5 years ago that were Colts. I ended up paying like $600 for the SAW one. These other few vendors who have gotten factory barrels are nice, but not something that was always around. I also had chopped 10.3" barrels when I bought my SAW one, but I wanted to have one for the hell of it. |
"That's my secret cap, I'm always drunk"
|
Originally Posted By ECPrevatte:
There weren't 10.3" factory barrels with FSBs about 5 years ago that were Colts. I ended up paying like $600 for the SAW one. These other few vendors who have gotten factory barrels are nice, but not something that was always around. I also had chopped 10.3" barrels when I bought my SAW one, but I wanted to have one for the hell of it. |
|
Originally Posted By brodband8: Nice. Needs a peq Yeah, I'm planning on getting a full power PEQ for it once I get night vision. Come to think of it, I guess I'll have to get a PEQ for the NT4 host, too - can't be playing favorites :\. Originally Posted By ECPrevatte:
There weren't 10.3" factory barrels with FSBs about 5 years ago that were Colts. I ended up paying like $600 for the SAW one. These other few vendors who have gotten factory barrels are nice, but not something that was always around. I also had chopped 10.3" barrels when I bought my SAW one, but I wanted to have one for the hell of it. Problem is, times have changed and SAW is still acting like they're the only game in town. I guess they don't care to be competitive (and I don't think parts sales are really a major portion of their business); still, price gouging is price gouging. |
Practice, the master of all things. - Augustus
|
Originally Posted By eodinert: That isn't a thing. If it's too much, don't buy it, and you remain forever un-gouged. |
|
Originally Posted By cjwwd2:
https://i.imgur.com/CcOPALU.jpg 
|
Live Free or Die
NRA Patron Member
Follow me on IG @josh_goes_pewpew
NRA Patron Member
Follow me on IG @josh_goes_pewpew
Mk 18 / CQBR (Page 1247 of 1609)
AR Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter