AR Sponsor
|
Originally Posted By Tmender03:
Seems to me, if I wanted to upgrade my Block II to this, I need the rail and charging handle, as well as a DD 14.5" middy barrel, rest is the same? Sadly I can't see a way of making this happen without buying the complete upper and selling off parts I'm not going to use (expensive option). |
|
Originally Posted By CTM1:
Worst pic thread in this forum. BTW, this is information about the URG-I and cloning it plus pictures, not a picture thread. Anyway, I suspect there will be a lot more pics in a couple of months. |
|
Originally Posted By UndrGrndPrdcts:
What makes the brownells lowers acceptable for clones (any clones?)? Are they quality? I wish colt lowers weren't so difficult to acquire. Some hardcore cloners do 80% lowers with custom engraving to mimic issue lowers but most agree that any forged lower is fine. I personally like Range Tool or PSA Stealth lowers without rollmark graphics. |
|
Originally Posted By UndrGrndPrdcts:
What makes the brownells lowers acceptable for clones (any clones?)? Are they quality? I wish colt lowers weren't so difficult to acquire. |
"When a man knows he is to be hanged in a fortnight, it concentrates his mind wonderfully." - Dr. Samuel Johnson
|
Originally Posted By pezboytate:
Any type of M4A1 clone can turn into an URG-I with a barrel, rail, charging handle, gas tube, gas tube pin, possibly gas block, and possibly muzzle device. Originally Posted By pezboytate:
Originally Posted By Tmender03:
Seems to me, if I wanted to upgrade my Block II to this, I need the rail and charging handle, as well as a DD 14.5" middy barrel, rest is the same? Sadly I can't see a way of making this happen without buying the complete upper and selling off parts I'm not going to use (expensive option). 
So, basically everything but the forged upper. Might as well just buy it completed and leave the Block II clone alone. |
|
Originally Posted By socommatthews:
So, basically everything but the forged upper. Might as well just buy it completed and leave the Block II clone alone. |
|
I came upon these URG-I pics:
Attached File Attached File @CTM1 |
|
Originally Posted By pezboytate:
I came upon these URG-I pics: https://www.AR15.Com/media/mediaFiles/138579/URG-I_1-465116.JPG https://www.AR15.Com/media/mediaFiles/138579/URG-I_2-465117.JPG @CTM1 |
Colt the rifles and super sport the motorcycles
|
Originally Posted By imdBman:
Razor 1-6 also? |
What is best in life? To crush your enemies, see them driven before you, and to hear the lamentation of their women!
|
Originally Posted By MILSPEC556:
Are my eyes deceiving me or is that a closed tine warcomp? Originally Posted By MILSPEC556:
Originally Posted By pezboytate:
I came upon these URG-I pics: https://www.AR15.Com/media/mediaFiles/138579/URG-I_1-465116.JPG https://www.AR15.Com/media/mediaFiles/138579/URG-I_2-465117.JPG @CTM1 |
"When a man knows he is to be hanged in a fortnight, it concentrates his mind wonderfully." - Dr. Samuel Johnson
|
Originally Posted By Combat_Diver:
As stated the URG-I will continue to use the SF4P. CD Originally Posted By Combat_Diver:
Originally Posted By BurtSaun1049:
I sure hope so. Man, the tuning fork drives me insane. CD 
|
"When a man knows he is to be hanged in a fortnight, it concentrates his mind wonderfully." - Dr. Samuel Johnson
|
Originally Posted By BurtSaun1049:
I sure hope so. Man, the tuning fork drives me insane. |
|
Originally Posted By BurtSaun1049:
I sure hope so. Man, the tuning fork drives me insane. Originally Posted By BurtSaun1049:
Originally Posted By MILSPEC556:
Originally Posted By pezboytate:
I came upon these URG-I pics: https://www.AR15.Com/media/mediaFiles/138579/URG-I_1-465116.JPG https://www.AR15.Com/media/mediaFiles/138579/URG-I_2-465117.JPG @CTM1 With this URGI upper, if you’re actually running it suppressed you'll end up never shooting it without the silencer attached because the 3p/4p is so obnoxious. If you’re not going to run suppressed, I'd just go with the closed tine and shoot for a "fielded" build and not worry so much about "as issued". Just my opinion of course. |
|
Originally Posted By ThRob:
Same here, it freakin’ drives me crazy on my MK18 build.... *PIIIIIIIINNNNNNNNNNG* With this URGI upper, if you’re actually running it suppressed you'll end up never shooting it without the silencer attached because the 3p/4p is so obnoxious. If you’re not going to run suppressed, I'd just go with the closed tine and shoot for a "fielded" build and not worry so much about "as issued". Just my opinion of course. Originally Posted By ThRob:
Originally Posted By BurtSaun1049:
Originally Posted By MILSPEC556:
Originally Posted By pezboytate:
I came upon these URG-I pics: https://www.AR15.Com/media/mediaFiles/138579/URG-I_1-465116.JPG https://www.AR15.Com/media/mediaFiles/138579/URG-I_2-465117.JPG @CTM1 With this URGI upper, if you’re actually running it suppressed you'll end up never shooting it without the silencer attached because the 3p/4p is so obnoxious. If you’re not going to run suppressed, I'd just go with the closed tine and shoot for a "fielded" build and not worry so much about "as issued". Just my opinion of course. |
|
Originally Posted By alpha0815: Yep. The big question I think with the URG-I is the next generation of preferred optics. We definitely will see some LPVs in use but I still think there is no replacement for 1x red dots for use in raids and QRF type missions. I bet Geissele will get the contract for the mount, whatever it is. They pretty much got them covered....Aimpoint, MRO, 1-6x. |
|
Originally Posted By pezboytate:
https://www.AR15.Com/media/mediaFiles/138579/URG-1_3-466184.JPG Probably unit level swap. |
|
Originally Posted By M4A1SOPMOD: Dont be surprised when eotechs are still the preferred 1x |
What is best in life? To crush your enemies, see them driven before you, and to hear the lamentation of their women!
|
Originally Posted By spydercomonkey:
Who makes that QD swivel? Looks pretty fancy compared to the typical. Originally Posted By spydercomonkey:
Originally Posted By pezboytate:
https://www.AR15.Com/media/mediaFiles/138579/URG-1_3-466184.JPG Probably unit level swap. |
|
Originally Posted By pezboytate:
KDG? Originally Posted By pezboytate:
Originally Posted By spydercomonkey:
Originally Posted By pezboytate:
https://www.AR15.Com/media/mediaFiles/138579/URG-1_3-466184.JPG Probably unit level swap. |
|
Originally Posted By pezboytate:
https://www.AR15.Com/media/mediaFiles/138579/URG-1_3-466184.JPG Probably unit level swap. MILSPEC- 1 Rest of ARFCOM except PBT- 0 Suck it noobs. 
|
Colt the rifles and super sport the motorcycles
|
Originally Posted By pezboytate:
https://www.AR15.Com/media/mediaFiles/138579/URG-1_3-466184.JPG Probably unit level swap. |
Squire
Without blood, it doesn't count!
I survived ARFbortion2016 and all I got was this stupid sigline
Without blood, it doesn't count!
I survived ARFbortion2016 and all I got was this stupid sigline
|
Originally Posted By 871JZ:
You guys that think the SF's ping loudly must not have used an AAC Blackout. No comparison the AAC is 100x louder and longer lasting, but it doesn't bother me either way, so I guess I'm in the minority. Originally Posted By 871JZ:
Originally Posted By ThRob:
Originally Posted By BurtSaun1049:
Originally Posted By MILSPEC556:
Originally Posted By pezboytate:
I came upon these URG-I pics: https://www.AR15.Com/media/mediaFiles/138579/URG-I_1-465116.JPG https://www.AR15.Com/media/mediaFiles/138579/URG-I_2-465117.JPG @CTM1 With this URGI upper, if you’re actually running it suppressed you'll end up never shooting it without the silencer attached because the 3p/4p is so obnoxious. If you’re not going to run suppressed, I'd just go with the closed tine and shoot for a "fielded" build and not worry so much about "as issued". Just my opinion of course.
|
Squire
Without blood, it doesn't count!
I survived ARFbortion2016 and all I got was this stupid sigline
Without blood, it doesn't count!
I survived ARFbortion2016 and all I got was this stupid sigline
|
Originally Posted By Combat_Diver: Offically only word I have is I've got work to do assembling. Talked to Bill G and was told assembled barrels with gas block and G barrel nut. Remove old barrel, install new barrel, tighten nut (one wrench per 10 rails) and then screw on new rail with T30 screws. Same S4P. Only word on gas blocks I've seen was G stating it was DD Mk12 GBs. Don't know yet until I actually get the kits. CD Forgive me if Im I'm completely misinterpreting this, or if this has already been covered, but why one wrench per ten rails? Is there concern about fatigue and altered torque application over time? Or is it just insurance? |
|
Originally Posted By mmmboats: @Combat_Diver Forgive me if Im I'm completely misinterpreting this, or if this has already been covered, but why one wrench per ten rails? Is there concern about fatigue and altered torque application over time? Or is it just insurance? CD |
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15&16'
Afganistan: 09,10,11',14'&17'
Iraq: 91,03,04,05,06,08,09,15&16'
Afganistan: 09,10,11',14'&17'
|
Originally Posted By MILSPEC556:
I can't and won't tell you my source but I can tell you this source is solid. I was told essentially it will be a lot of the SOPMOD Block 2 accessories to begin with (LA-5, Elcan etc) BUT- with 1-6 and/or 1-8 powered variables. That's all I was able to squeeze out at this current time.
As things progress I'm sure we will see even more accessory changes over time. Just like with any other evolution, URG, or package Originally Posted By MILSPEC556:
Originally Posted By iMONOob11:
Anyone have an idea what optics and accessories have been chosen. I hope NF wins the contract for the squad LPV, i want me a ATACR 1-8 on a clone build. I was told essentially it will be a lot of the SOPMOD Block 2 accessories to begin with (LA-5, Elcan etc) BUT- with 1-6 and/or 1-8 powered variables. That's all I was able to squeeze out at this current time.
As things progress I'm sure we will see even more accessory changes over time. Just like with any other evolution, URG, or package  , seriously though, I’m looking at the striped upper as with my other clones, their complete up to the AAC mounts for my M4 2000’s, I’ve thought about getting a SF can but I don’t think their that much better to justify the cost, verse say Ruggeds? I would like the charging handle, as well as Geisseles gas block if it’s better, than he DD? I’m talking overall ruggedness, and stainless is better. Just my thoughts and where I’m coming from.
|
How much crack did you have to smoke to reach that conclusion? Was it just a $20 rock or was it like Whitney Houston level shit?
”Guitargod1985”
”Guitargod1985”
|
Well now that I received by full Geissele URGI I guess I'm on my way to a clone. http://s1249.photobucket.com/user/alexanderdavis625/media/20180303_135238_zpsylfnaagf.jpg.html?sort=3&o=2 |
|
Originally Posted By Alex11B:
Well now that I received by full Geissele URGI I guess I'm on my way to a clone. http://s1249.photobucket.com/user/alexanderdavis625/media/20180303_135238_zpsylfnaagf.jpg.html?sort=3&o=2 |
|
Originally Posted By Alex11B:
Well now that I received by full Geissele URGI I guess I'm on my way to a clone. http://s1249.photobucket.com/user/alexanderdavis625/media/20180303_135238_zpsylfnaagf.jpg.html?sort=3&o=2 |
|
Originally Posted By Alex11B:
Well now that I received by full Geissele URGI I guess I'm on my way to a clone. http://s1249.photobucket.com/user/alexanderdavis625/media/20180303_135238_zpsylfnaagf.jpg.html?sort=3&o=2 |
If U can't Truck It F!@k It!
|
Originally Posted By Alex11B:
Well now that I received by full Geissele URGI I guess I'm on my way to a clone. http://s1249.photobucket.com/user/alexanderdavis625/media/20180303_135238_zpsylfnaagf.jpg.html?sort=3&o=2 |
If U can't Truck It F!@k It!
|
Originally Posted By Alex11B: The rail is very nice. Reminds me of the DD v7 rail in profile. It came with a SF 3p FH. (Not warcomp  )
CD |
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15&16'
Afganistan: 09,10,11',14'&17'
Iraq: 91,03,04,05,06,08,09,15&16'
Afganistan: 09,10,11',14'&17'
AR Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter