User Panel
User Panel
User Panel
NC, USA
|
Posted: 5/6/2020 11:17:11 AM EST
[Last Edit: Eyekahn]
[#1]
Quote HistoryOriginally Posted By UndrGrndPrdcts: Did you chrono your 75gr Tac loads? Always, 24gr TAC Rem 7-1/2 primer 75gr BTHP Frontier brass 2.25oal 2475 out of my 12.5 with AEM5 at sea level at 65 degrees. This load was a monster in my NSW RECCE. Shoots ok in this barrel. I'm going to bump it up to 25gr with some 5.56 brass and magnum primer and see if I can get to 2550 or higher. Same specs with 69 SMK is 2508 at 80 degrees. My 2520 load is 2720 I believe it's 26gr with a 55gr spbt |
|
|
|
Posted: 5/6/2020 11:20:39 AM EST
[#2]
Quote HistoryOriginally Posted By Eyekahn: Always, 24gr TAC Rem 7-1/2 primer 75gr BTHP Frontier brass 2.25oal 2475 out of my 12.5 with AEM5 at sea level at 65 degrees. This load was a monster in my NSW RECCE. Shoots ok in this barrel. I'm going to bump it up to 25gr with some 5.56 brass and magnum primer and see if I can get to 2550 or higher. Same specs with 69 SMK is 2508 at 80 degrees. My 2520 load is 2720 I believe it's 26gr with a 55gr spbt Right on. I'm going to be loading heavies for this 14" and I haven't decided on powder yet. |
|
|
|
NC, USA
|
Posted: 5/6/2020 12:16:09 PM EST
[Last Edit: Eyekahn]
[#3]
Quote HistoryOriginally Posted By UndrGrndPrdcts: Right on. I'm going to be loading heavies for this 14" and I haven't decided on powder yet. TAC is great. Varget is always super accurate just a little slow sometimes. All depends on your pressure signs. Never really messed with other powder for 223. I've got this AA2520 but I'm not a fan. I've heard the VIht powders are great and XBR. I was at 2620 in my 15.1 Bartlein with that 75 load. |
|
|
TN, USA
|
Posted: 5/6/2020 12:33:39 PM EST
[#4]
Quote HistoryOriginally Posted By Eyekahn: TAC is great. Varget is always super accurate just a little slow sometimes. All depends on your pressure signs. Never really messed with other powder for 223. I've got this AA2520 but I'm not a fan. I've heard the VIht powders are great and XBR. I was at 2620 in my 15.1 Bartlein with that 75 load. |
|
|
|
Posted: 5/6/2020 12:48:23 PM EST
[Last Edit: UndrGrndPrdcts]
[#5]
Quote HistoryOriginally Posted By 135Patriots: XBR and CFE are my go-to powders for barrels 16" and under. Varget is a classic but meters like crap. The mini recce has seen many a round of 24.5gr CFE behind a 77gr SMK. Quote HistoryOriginally Posted By 135Patriots: Originally Posted By Eyekahn: TAC is great. Varget is always super accurate just a little slow sometimes. All depends on your pressure signs. Never really messed with other powder for 223. I've got this AA2520 but I'm not a fan. I've heard the VIht powders are great and XBR. I was at 2620 in my 15.1 Bartlein with that 75 load. XBR is generally hard to find. Might have to steal that cfe load. Tac is cheap and available in bulk. Thinking of ditching the noveske rail. I like sturdier feeling rails. Also used to my CQBR. Whats the cons of the pri tube? I wouldnt mind tucking my sandman about an inch. |
|
|
|
|
Posted: 5/6/2020 1:56:58 PM EST
[#6]
|
|
|
|
|
Posted: 5/7/2020 6:50:28 AM EST
[Last Edit: RTUtah]
[#7]
Quote HistoryOriginally Posted By ForestRegion: @RTUtah Go on... So there I was, drinking a heady tropical IPA last Sunday afternoon - my fourth, as I recall. It was a lovely day; breezy, upper 70s, and I was surrounded by beautiful women "dressed" in provocative ensembles vying for every last ounce of my uninterested attention. I was also on the ol' interwebz, and I'd stumbled upon a deal I just couldn't refuse... It was a scope for my mini and all those aforementioned dames cheered me on as it typed the classic line, "I'll take it!" and clicked submit. Tune in tomorrow for the conclusion of this riveting tale. 
|
|
|
|
|
Posted: 5/7/2020 7:01:56 AM EST
[#8]
Quote HistoryOriginally Posted By RTUtah: So there I was, drinking a heady tropical IPA last Sunday afternoon - my fourth, as I recall. It was a lovely day; breezy, upper 70s, and I was surrounded by beautiful women "dressed" in provocative ensembles vying for every last ounce of my uninterested attention. I was also on the ol' interwebz, and I'd stumbled upon a deal I just couldn't refuse... It was a scope for my mini and all those aforementioned dames cheered me on as it typed the classic line, "I'll take it!" and clicked submit. Tune in tomorrow for the conclusion of this riveting tale. Quote HistoryOriginally Posted By RTUtah: Originally Posted By ForestRegion: @RTUtah Go on... So there I was, drinking a heady tropical IPA last Sunday afternoon - my fourth, as I recall. It was a lovely day; breezy, upper 70s, and I was surrounded by beautiful women "dressed" in provocative ensembles vying for every last ounce of my uninterested attention. I was also on the ol' interwebz, and I'd stumbled upon a deal I just couldn't refuse... It was a scope for my mini and all those aforementioned dames cheered me on as it typed the classic line, "I'll take it!" and clicked submit. Tune in tomorrow for the conclusion of this riveting tale. I read this as you got drunk with eyekahn and he looks good in a dress to you. |
|
|
|
NC, USA
|
Posted: 5/7/2020 7:41:32 AM EST
[Last Edit: Eyekahn]
[#9]
Quote HistoryOriginally Posted By SDMF_Rebel: I read this as you got drunk with eyekahn and he looks good in a dress to you. HAHAHA! I think it was in the middle of the woods on a muddy shooting range. Utah looked at me about 20 minutes after shooting the NX8 and said "Man, I dunno about the MK6 anymore..." |
|
|
|
Posted: 5/7/2020 7:46:20 AM EST
[#10]
I suppose a PRI rifle tube would look silly with a 14" barrel and no aem5? I'm exploring rail options.
Also @SDMF_Rebel what part of PA you from? |
|
|
|
|
Posted: 5/7/2020 8:44:21 AM EST
[#11]
Quote HistoryOriginally Posted By UndrGrndPrdcts: I suppose a PRI rifle tube would look silly with a 14" barrel and no aem5? I'm exploring rail options. Also @SDMF_Rebel what part of PA you from? Berks |
|
|
|
|
Posted: 5/7/2020 8:46:31 AM EST
[#12]
Quote HistoryOriginally Posted By SDMF_Rebel: Berks 
|
|
|
|
|
Posted: 5/7/2020 8:53:19 AM EST
[#13]
Quote HistoryOriginally Posted By SDMF_Rebel: I read this as you got drunk with eyekahn and he looks good in a dress to you. Those writers know how to put a spin on everything... |
|
|
|
PA, USA
|
Posted: 5/7/2020 11:16:29 AM EST
[Last Edit: HaveBlue83]
[#14]
Took the 12.5" mini RECCE out to 800yds last weekend. It did AWESOME with a 4x TA31. I see no reason to go LPVO, the Triji is SO clear. I could see 1k plates all day. Didnt go past 800 cause i ran out of bdc. Lol.
400,500,600,700,800yds all hits on rocks and plates. Wind hold was about 1-2ft for 600-800yds. 600 was 650 hold, 700 was 725 hold, 800 was about where 850-875 would be. Load was 75gr OTM hornady, over 23.2gr 8208XBR.   |
|
|
GA, USA
|
Posted: 5/7/2020 11:53:40 AM EST
[#15]
Quote HistoryOriginally Posted By HaveBlue83: Took the 12.5" mini RECCE out to 800yds last weekend. It did AWESOME with a 4x TA31. I see no reason to go LPVO, the Triji is SO clear. I could see 1k plates all day. Didnt go past 800 cause i ran out of bdc. Lol. 400,500,600,700,800yds all hits on rocks and plates. Wind hold was about 1-2ft for 600-800yds. 600 was 650 hold, 700 was 725 hold, 800 was about where 850-875 would be. Load was 75gr OTM hornady, over 23.2gr 8208XBR. https://i.ibb.co/QMxv6w1/IMG-20200502-135217374.jpg https://i.ibb.co/19L2Zsr/IMG-20200502-154143182.jpg Absolutely beautiful range and great results! |
|
|
|
Posted: 5/7/2020 12:38:29 PM EST
[#16]
Quote HistoryOriginally Posted By SDMF_Rebel: I read this as you got drunk with eyekahn and he looks good in a dress to you. lol, not quite but he does hold influential sway over my optic choices from time-to-time. 
|
|
|
|
TN, USA
|
Posted: 5/7/2020 1:53:17 PM EST
[#17]
 Can't believe I spent all this time in the unenlightened world of non 1.93-2.26 height mounts. It's glorious. |
|
|
|
Posted: 5/7/2020 2:59:00 PM EST
[#18]
Somebody talk me down from the PRI.
|
|
|
|
|
Posted: 5/7/2020 5:28:32 PM EST
[#19]
Quote HistoryOriginally Posted By UndrGrndPrdcts: Somebody talk me down from the PRI. No |
|
|
|
PA, USA
|
Posted: 5/7/2020 5:31:56 PM EST
[#20]
Quote HistoryOriginally Posted By SecretSquirell: No  Seconded |
|
|
NC, USA
|
Posted: 5/7/2020 6:33:18 PM EST
[#21]
Quote HistoryOriginally Posted By HaveBlue83: SecondedQuote HistoryOriginally Posted By HaveBlue83: Originally Posted By SecretSquirell: No Seconded3rded |
|
|
|
Posted: 5/7/2020 7:03:34 PM EST
[Last Edit: UndrGrndPrdcts]
[#22]
Quote HistoryOriginally Posted By Eyekahn: 3rded Quote HistoryOriginally Posted By Eyekahn: Originally Posted By HaveBlue83: Originally Posted By SecretSquirell: No Seconded3rded Eta: Ordered a fde one. |
|
|
|
NC, USA
|
Posted: 5/7/2020 8:29:18 PM EST
[#23]
Quote HistoryOriginally Posted By RTUtah: So there I was, drinking a heady tropical IPA last Sunday afternoon - my fourth, as I recall. It was a lovely day; breezy, upper 70s, and I was surrounded by beautiful women "dressed" in provocative ensembles vying for every last ounce of my uninterested attention. I was also on the ol' interwebz, and I'd stumbled upon a deal I just couldn't refuse... It was a scope for my mini and all those aforementioned dames cheered me on as it typed the classic line, "I'll take it!" and clicked submit. Tune in tomorrow for the conclusion of this riveting tale. Quote HistoryOriginally Posted By RTUtah: Originally Posted By ForestRegion: @RTUtah Go on... So there I was, drinking a heady tropical IPA last Sunday afternoon - my fourth, as I recall. It was a lovely day; breezy, upper 70s, and I was surrounded by beautiful women "dressed" in provocative ensembles vying for every last ounce of my uninterested attention. I was also on the ol' interwebz, and I'd stumbled upon a deal I just couldn't refuse... It was a scope for my mini and all those aforementioned dames cheered me on as it typed the classic line, "I'll take it!" and clicked submit. Tune in tomorrow for the conclusion of this riveting tale. Oh, you had me at drinking Can’t wait to see how this concludes.
|
|
|
|
Posted: 5/7/2020 8:42:57 PM EST
[Last Edit: RTUtah]
[#24]
Quote HistoryOriginally Posted By ForestRegion: Oh, you had me at drinking Can't wait to see how this concludes.If first impressions are everything, then I don't reckon the NX8/Unimount combo can be fucked with.  Attached File |
|
|
|
|
Posted: 5/7/2020 8:54:40 PM EST
[#25]
Quote HistoryOriginally Posted By RTUtah: If first impressions are everything, then I don't reckon the NX8/Unimount combo can be fucked with. https://www.AR15.Com/media/mediaFiles/111561/20E3AA35-904D-4CC0-877F-D767B1D6B42F_jpe-1406073.JPG Looks good man.  Attached File |
|
|
|
|
Posted: 5/7/2020 9:07:51 PM EST
[#26]
Quote HistoryOriginally Posted By RTUtah: If first impressions are everything, then I don't reckon the NX8/Unimount combo can be fucked with. https://www.AR15.Com/media/mediaFiles/111561/20E3AA35-904D-4CC0-877F-D767B1D6B42F_jpe-1406073.JPG Makes pp hard. |
|
|
|
|
Posted: 5/7/2020 9:13:19 PM EST
[#27]
Quote HistoryOriginally Posted By RTUtah: If first impressions are everything, then I don't reckon the NX8/Unimount combo can be fucked with. https://www.AR15.Com/media/mediaFiles/111561/20E3AA35-904D-4CC0-877F-D767B1D6B42F_jpe-1406073.JPG  Attached File |
|
|
|
CA, USA
|
Posted: 5/7/2020 9:44:09 PM EST
[#28]
@RTUtah that is damn nice
|
|
|
VA, USA
|
Posted: 5/8/2020 3:33:30 AM EST
[#29]
Quote HistoryOriginally Posted By RTUtah: If first impressions are everything, then I don't reckon the NX8/Unimount combo can be fucked with. https://www.AR15.Com/media/mediaFiles/111561/20E3AA35-904D-4CC0-877F-D767B1D6B42F_jpe-1406073.JPG Mount #? |
|
|
NC, USA
|
Posted: 5/8/2020 6:19:31 AM EST
[#30]
Quote HistoryOriginally Posted By RTUtah: If first impressions are everything, then I don't reckon the NX8/Unimount combo can be fucked with. https://www.AR15.Com/media/mediaFiles/111561/20E3AA35-904D-4CC0-877F-D767B1D6B42F_jpe-1406073.JPG Yuuuup |
|
|
|
Posted: 5/8/2020 6:37:13 AM EST
[#31]
Quote HistoryOriginally Posted By UndrGrndPrdcts: I suppose a PRI rifle tube would look silly with a 14" barrel and no aem5? I'm exploring rail options. Also @SDMF_Rebel what part of PA you from? I've thought about doing a build with a PRI tube and a MD flush with the end of the rail. I think it would look good, especially with a suppressor. |
|
|
|
|
Posted: 5/8/2020 6:54:07 AM EST
[Last Edit: RTUtah]
[#32]
Thanks gents. I've known all along NF glass is my favorite so it didn't take for @Eyekahn to convince me. I ditched the Mk6 for the NX8 and I picked up a 4-16x ATACR for the SR-25EC. Still got the Mk8 but I hope it sells ASAP.
@rgb, I went with the A496 (1.50", 0 MOA) for the mini, and A497 (1.50", 0 MOA) for the SR-25. Seems a little weird not using something with 19 or 20 MOA built in but like Clay said, these scopes have a lot of adjustment built in. |
|
|
|
|
Posted: 5/8/2020 6:57:07 AM EST
[#33]
Quote HistoryOriginally Posted By 2apatriot: I've thought about doing a build with a PRI tube and a MD flush with the end of the rail. I think it would look good, especially with a suppressor. Stay tuned. |
|
|
|
VA, USA
|
Posted: 5/8/2020 7:24:28 AM EST
[Last Edit: rgb]
[#34]
Quote HistoryOriginally Posted By RTUtah: Thanks gents. I've known all along NF glass is my favorite so it didn't take for @Eyekahn to convince me. I ditched the Mk6 for the NX8 and I picked up a 4-16x ATACR for the SR-25EC. Still got the Mk8 but I hope it sells ASAP. @rgb, I went with the A496 (1.50", 0 MOA) for the mini, and A497 (1.50", 0 MOA) for the SR-25. Seems a little weird not using something with 19 or 20 MOA built in but like Clay said, these scopes have a lot of adjustment built in. Thanks, is the nx8 reticle visible/usable at 4x without illumination? |
|
|
|
Posted: 5/8/2020 8:52:30 AM EST
[#35]
Quote HistoryOriginally Posted By rgb: Thanks, is the nx8 reticle visible/usable at 4x without illumination? Quote HistoryOriginally Posted By rgb: Originally Posted By RTUtah: Thanks gents. I've known all along NF glass is my favorite so it didn't take for @Eyekahn to convince me. I ditched the Mk6 for the NX8 and I picked up a 4-16x ATACR for the SR-25EC. Still got the Mk8 but I hope it sells ASAP. @rgb, I went with the A496 (1.50", 0 MOA) for the mini, and A497 (1.50", 0 MOA) for the SR-25. Seems a little weird not using something with 19 or 20 MOA built in but like Clay said, these scopes have a lot of adjustment built in. Thanks, is the nx8 reticle visible/usable at 4x without illumination? yes |
|
|
|
|
Posted: 5/8/2020 9:17:33 AM EST
[#36]
Quote HistoryOriginally Posted By rgb: Thanks, is the nx8 reticle visible/usable at 4x without illumination?  Nightforce NX8 1-8x24 F1: Optics Review - LPVO |
|
|
|
NC, USA
|
Posted: 5/8/2020 12:10:02 PM EST
[Last Edit: Eyekahn]
[#37]
Quote HistoryThat was a good video. I enjoy their channel. Do drama. No cool guy BS. Just shooting and good reviews. They just dropped a GIII Razor vid. Need to watch that. |
|
|
NC, USA
|
Posted: 5/8/2020 2:04:43 PM EST
[#38]
Quote HistoryOriginally Posted By RTUtah: If first impressions are everything, then I don't reckon the NX8/Unimount combo can be fucked with. https://www.AR15.Com/media/mediaFiles/111561/20E3AA35-904D-4CC0-877F-D767B1D6B42F_jpe-1406073.JPG Quote HistoryOriginally Posted By RTUtah: Originally Posted By ForestRegion: Oh, you had me at drinking Can't wait to see how this concludes.If first impressions are everything, then I don't reckon the NX8/Unimount combo can be fucked with. https://www.AR15.Com/media/mediaFiles/111561/20E3AA35-904D-4CC0-877F-D767B1D6B42F_jpe-1406073.JPG Gah  Well now I'm on the hunt for an NX8 lol Also:  NOT MINE* Just an IG screenshot. Thought you guys might dig it though. |
|
|
|
Posted: 5/8/2020 2:10:48 PM EST
[#39]
Took a vacation day, since I don’t see me having a family vacation this year... Poured down rain the first hour but printed some good groups. I really need to take a class next year with this setup once the Surefire Mini clears.
I also bought a J-Arm and an RMR plate for the C1 mount. Maybe it’s dumb to run one with a scope that does so well on 1x but I’m itching to try it out once I order an RMR.   
|
|
|
|
|
Posted: 5/8/2020 2:21:26 PM EST
[#40]
Quote HistoryOriginally Posted By Maack: Took a vacation day, since I don’t see me having a family vacation this year... Poured down rain the first hour but printed some good groups. I really need to take a class next year with this setup once the Surefire Mini clears. I also bought a J-Arm and an RMR plate for the C1 mount. Maybe it’s dumb to run one with a scope that does so well on 1x but I’m itching to try it out once I order an RMR. https://1.bp.blogspot.com/-L7SZv657e5A/XrWsw7AX11I/AAAAAAAAJKc/uf8O2FoTQCwAQYyWmNQVUjDXYbkGI-uMwCLcBGAsYHQ/s1600/9FE34C4D-9B8D-423E-A9D4-8F941A4CD924.jpeg https://1.bp.blogspot.com/-HPlu4dTzqvg/XrWsx5Ych9I/AAAAAAAAJKg/74ORRPZr0OI-K9nZg2wNVBpVhi0SsJ4qwCLcBGAsYHQ/s1600/378C44AC-209C-4A05-AA4B-2389CCEC5279.jpeg https://1.bp.blogspot.com/-0_oYiRVC-OM/XrWsgw07kHI/AAAAAAAAJKU/57A-Y2AiFtg0hEJY4oH2Il_ltV9SdsFGACLcBGAsYHQ/s1600/2964336A-BB71-4B78-A08E-F310AE4CE948.jpeg What height mount |
|
|
|
|
Posted: 5/8/2020 2:56:03 PM EST
[#41]
Quote HistoryOriginally Posted By brodband8: What height mount Quote HistoryOriginally Posted By brodband8: Originally Posted By Maack: Took a vacation day, since I don’t see me having a family vacation this year... Poured down rain the first hour but printed some good groups. I really need to take a class next year with this setup once the Surefire Mini clears. I also bought a J-Arm and an RMR plate for the C1 mount. Maybe it’s dumb to run one with a scope that does so well on 1x but I’m itching to try it out once I order an RMR. https://1.bp.blogspot.com/-L7SZv657e5A/XrWsw7AX11I/AAAAAAAAJKc/uf8O2FoTQCwAQYyWmNQVUjDXYbkGI-uMwCLcBGAsYHQ/s1600/9FE34C4D-9B8D-423E-A9D4-8F941A4CD924.jpeg https://1.bp.blogspot.com/-HPlu4dTzqvg/XrWsx5Ych9I/AAAAAAAAJKg/74ORRPZr0OI-K9nZg2wNVBpVhi0SsJ4qwCLcBGAsYHQ/s1600/378C44AC-209C-4A05-AA4B-2389CCEC5279.jpeg https://1.bp.blogspot.com/-0_oYiRVC-OM/XrWsgw07kHI/AAAAAAAAJKU/57A-Y2AiFtg0hEJY4oH2Il_ltV9SdsFGACLcBGAsYHQ/s1600/2964336A-BB71-4B78-A08E-F310AE4CE948.jpeg What height mount 1.7” |
|
|
|
TX, USA
|
Posted: 5/8/2020 3:05:43 PM EST
[Last Edit: CMCctx]
[#42]
*glitch on wrong page*
|
|
|
NC, USA
|
Posted: 5/8/2020 3:49:48 PM EST
[#43]
Quote HistoryOriginally Posted By ForestRegion: Gah Well now I'm on the hunt for an NX8 lol Also: https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/1666150066145959/medium/1588964525/enhance NOT MINE* Just an IG screenshot. Thought you guys might dig it though. Whose man is this? I thought about doing that many times for 300BLK |
|
|
|
Posted: 5/8/2020 5:00:24 PM EST
[#44]
Quote HistoryOriginally Posted By ForestRegion: Gah Well now I'm on the hunt for an NX8 lol Also: https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/1666150066145959/medium/1588964525/enhance NOT MINE* Just an IG screenshot. Thought you guys might dig it though. Quote HistoryOriginally Posted By ForestRegion: Originally Posted By RTUtah: Originally Posted By ForestRegion: Oh, you had me at drinking Can't wait to see how this concludes.If first impressions are everything, then I don't reckon the NX8/Unimount combo can be fucked with. https://www.AR15.Com/media/mediaFiles/111561/20E3AA35-904D-4CC0-877F-D767B1D6B42F_jpe-1406073.JPG Gah Well now I'm on the hunt for an NX8 lol Also: https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/1666150066145959/medium/1588964525/enhance NOT MINE* Just an IG screenshot. Thought you guys might dig it though. All these MFs out there jockin my style
|
|
|
|
NC, USA
|
Posted: 5/8/2020 5:52:06 PM EST
[#45]
Quote HistoryOriginally Posted By SDMF_Rebel: All these MFs out there jockin my style I've been hip to the NX8 since page 82. But I did rip off everything else from you! |
|
|
|
Posted: 5/8/2020 8:08:29 PM EST
[#46]
 14.5 count? |
|
|
|
USA
|
Posted: 5/8/2020 8:12:41 PM EST
[#47]
Does a soon-to-be mini recce count? lol I've been inspired by this thread and I'm almost there.. just a few more small pieces, and an efile away!
|
|
|
USA
|
Posted: 5/8/2020 9:53:17 PM EST
[#48]
Have a bunch of parts coming in for a mini recce... I’m sure it’ll look a lot like u/ RTUTAH’s... because his has given me all the feels since he put it together.
Going to run a 11.3” wilson, KAC medium ff RAS, and a NXS 2.5-10x24 in badger rings. Will probably end up piggybacking a Docter in a Wilcox mount if my boy will come up off his mount. Torn as to which of two cans I have in jail right now I will run on it... aac m4-2000 or RC2. |
|
|
NC, USA
|
Posted: 5/9/2020 6:27:42 AM EST
[#49]
Quote HistoryOriginally Posted By GeauxSouth86: Have a bunch of parts coming in for a mini recce... I’m sure it’ll look a lot like u/ RTUTAH’s... because his has given me all the feels since he put it together. Going to run a 11.3” wilson, KAC medium ff RAS, and a NXS 2.5-10x24 in badger rings. Will probably end up piggybacking a Docter in a Wilcox mount if my boy will come up off his mount. Torn as to which of two cans I have in jail right now I will run on it... aac m4-2000 or RC2. RC2! Those 11.3 Wilson's are sick barrels. This gives you a rough idea what's its like with an AAC. 11.3 Wilson with medium RAS. I ran a N6 instead of an M42K though. 
|
|
|
|
Posted: 5/9/2020 6:46:29 AM EST
[#50]
I am so tempted to switch my mini NSW to the turbo + 11.5 to shave a ton of weight.
|
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
