AR Sponsor
POST PICS OF YOUR BUILDS HERE.....SHOW EM OFF! (Page 1 of 51)
Posted: 3/23/2005 11:29:53 PM EDT
[Last Edit: XxSLASHERxX][Edited]
OK GUYS..here's you a thread to show off your purty builds......let's see em!
|
N.R.A. Master Class Shooter
Lieutenant Colonel, Alabama State Defense Force
Lieutenant Colonel, Alabama State Defense Force
That's nice, but that Vortex needs some threads and a thread protector.    The pics qualify for this thread, as I built the FH setup. 
|
This post edited for typos and grammatical errors.
Thinking twice and posting once.<img src=/images/smilies/anim_rolleyes.gif border=0 align=middle>
Hello, my name is Mongo and I am a couch sniper.
Thinking twice and posting once.<img src=/images/smilies/anim_rolleyes.gif border=0 align=middle>
Hello, my name is Mongo and I am a couch sniper.
|
My 6.8 SPR project completely built by me. *CMT M4 upper *18" Douglas SS barrel w/Mid-length gas system and 6.8 bolt from PRI *SPR (replica) Brake/Collar from Steve at ADCO *LaRue Gasblock *LBC NM Bolt carrier *PRI GasBuster *NightForce 2.5-10x24 w/ NPR2 reticle in a LaRue SPR 1.5 mount *LaRue 12.0 handguard *LaRue/Harris Bipod set-up *Lauer/LMT stripped lower built with RRA LPK *WOP tuned RRA trigger w/ KNS pins *Vltor A1 Clubfoot stock *Sierra Precision SPR grip *MagPul triggerguard |
"One is no more armed because he has possession of a firearm than he is a musician because he owns a piano. There is no point in having a gun if you are not capable of using it skillfully." (Lt. COL. Jeff Cooper U.S.M.C.)
 My carbine's gone through a long evolution, as I've learned what I want, and what I don't. Started with a RRA lower and a JT carbine kit. Today, the rifle's mutated into completely different beast. With the exception of the handguards, charging handle, and castle nut, every other part's changed; even the lower (which is now PWA). Amusingly, my newest build is pretty much a C7 rendition of the first iteration. |
ohhh man 
|
Nice M4 stickman, what parts did you use? Looks like the gun im gonna build when I finally get my upper |
Hmmm, I can't remember which one that even was...... It might be part bushie barrel with OA receivers and DPMS LPK... |
|
Here's my second build: Armalite lower RRA 2 stage trigger Del-ton upper Wilson 16" barrel Phantom FH Ergo grip Magpul M93 stock ACOG TA11F Combat black duracoat http://users.adelphia.net/~tyler2you/m4%20edited.JPG |
|
http://www.frontiernet.net/~ckelly/458waller.jpg .458 SOCOM 16" Carbine from castle arms Shrewd muzzle brake from teppojutsu Stag arms lower JP Single stage trigger/speed hammer 4lb with KNS anti rotational pins G27 Grip A1 buttstock with MGI rate reducing buffer and +10% Wolf spring Magpul winter trigger gaurd YHM flip up front and rear sights RRA parts kit for the rest Still deciding on the optics. Either a EOtech or aimpoint. Already have an EOtech and Im satisfied with it, but Im thinking of trying the Aimpoint also. |
I finished this one tonight: Bushmaster lower RRA 2-stage trigger pack Samco G27 pistol grip VLTOR stock CMT flat-top upper with feed ramp cuts Stag Arms/CMT 1x7 M4 barrel Samson MRFS-C rail system Falcon Ind. vertical grip Surefire weaponlight Aimpoint COMP-ML2 in QRP mount ARMS #40 flip-up rear sight Trijicon front post |
I like it, and demand the right to fondle it! |
|
Cool rifles guys! Here's my Colt Sporter Match HBAR converted to an Air Force M16 clone, along with my Romy SAR-1. I finished the wood on it, does that count?  And now here is the same HBAR converted to a lightweight carbine with the Bushmaster barrel just received Monday afternoon.  At this point everything is just hand tight. I hope to get it fully assembled by this weekend. Now I have my HBAR upper and furniture and my AF M16 parts in need of lower receivers. Awwwww....the sickness worsens....
|
Bumblebee Bob - Secretary of the West Slope Shooter's Society
Contact me for more information
Contact me for more information
I built this one from a stripped PWA lower in the early `90's. It was my first build and I assembled everything including the upper. I couldn't get over how easy it was! Same rifle (well, same lower receiver forging), 15 years later. I've "rebuilt" it at least 4 times. It now has all Bushmaster internals except for a RRA match trigger, and has a Colt/Diemaco upper assembly.  I built this one a couple of years ago from an Oly that had an out of spec lower. Oly replaced the lower with a new but still pre-ban piece, and I added Bushmaster internals and an early M16 upper. All the furniture was NOS. I recently sold this one to a fellow team member...  My 9/14/2004 build - RRA stripped lower, everything else Bushmaster. Also recently sold to someone from the board.  My current project - a new upper for my MG. Colt receiver, Bushmaster 14.5" 1 in 7" M4 "type" barrel, ARMS 45M, will have an Aimpoint ML2 on an ARMS mount and a Gemtech HALO can.  Here it is, completed....  I've probably built 8 rifles, but I've re-built a lot more both for myself and for friends. 
|
Were it not for the Brave, there would be no Land of the Free
Proud Phychopolitician #47
Proud Phychopolitician #47
|
Colt Match Target Comp. HBAR w/1-9 Chrome-Molly 16" Aimpoint M2 A.R.M.S-17 Throw Lever Mt w/#22M68 Full Spacer Insight M6X Light/Laser ACE M4 SOCOM Stock Midwest Industries Flip Up Rear Sight Titanium Firing Pin Tac Latch KNS Push-Button Takedown Pin (front) Oversized Forward Assist Hogue Pistol Grip TangoDown BattleGrip Vertical Grip YHM Flip Front Sight Tower YHM Free Float Light Weight 4 Rail Forearm YHM Free Float End Cap YHM 5C2 Phantom Flash Hider CQB Solutions Universal HST Sling http://i2.photobucket.com/albums/y30/ZeroTolerance1963/Picture055.jpg |
|
Just finished it! Currently with a 12X scope so I can go varmint hunting in May  (I can't afford a dedicated rifle gun now .... but soon).This is supposed to be my tactical carbine, and the only think not pictured is my LMT BUIS |
If Guns cause Crime, then Matches cause Arson.
|
I guess I have to give in too. Some of you probably have seen one of these pictures on other threads. I dont really want to show off all my builds, but heres my favorites. One of my first builds, Originally this was on a preban lower. I had taken a preban A2 rifle lower and installed a telescoping buttstock, bought myself a bushmaster A3 upper, and mounted a 14.5 inch Bushmaster M4 type barrel with the 2 3/16 inch Phantom Flash suppressor. When the ban ended, I purchased another stripped DPMS lower receiver and installed the parts into it. I then mated this to the upper so I could get the finishes to match better. The old preban lower is now on the Bottom M16A1 clone pictured below. The finishes match much better on both rifles now. In this M4 carbine, I have installed an M73 Surefire rail system, Magpul black rail covers, Trijicon Reflex 1 6.5 MOA sight, and a Streamlight M3X Xenon Tac light. All in all, I have put almost as much money into it with the accessories, as I did to built the carbine. Fun stuff! http://home.comcast.net/~canyonflyer/M4stand_1.jpg This is one of my favorite rifles. I built this during the AWB, so I had to go with post ban parts. It has a RRA lower, RRA A2 upper RRA Chromoly barrel with the Wilson Arms Tactical Birdcage muzzle brake permanently attached. This ended up being a pretty reasonably cost build, and cycles any type of ammunition you feed it. It's extremely reliable and accurate rifle. http://home.comcast.net/~canyonflyer/rockriverarmspost.jpg These are a couple of my more recent builds. Though I didnt put nearly as much effort into these as I did the other ones. The uppers were surplus government M16A1 uppers. The top one was a brand new colt manufactured upper assembly purchased through CDNN investments. The bottom was a used surplus M16A1 upper bought privately over the internet. Both came fully assembled, all I really had to do was get a bolt carrier and a charging handle for each. The lowers were a couple of DPMS low serial number lowers that I had taken off of some other rifles, and put on these to get the finishes to match. Finding the A1 pistol grips and the A1 buttstocks were probably the most difficult things to get out of these two (except for the CDNN upper, it came with a nice A1 trapdoor buttstock.) http://home.comcast.net/~canyonflyer/AR15A1s.jpg I am currently assembling two M4 Carbines....one for me and one for my brother in law. They will both have RRA uppers and lowers, with Bushmaster 16 inch profile barrels. Mine will have OD green furniture, the Bros with have Coyote Brown. I will post photos of them when I get them completed. Might be a while, RRA is backordered, and I havent got the uppers yet! |
 Bushmaster C7/M4 barrel upper w/M4 front swivel and handguards (yanked the top black heatshield out) XS Sights It now has a round A2 forward assist Ameetech lower various Bushmaster and early 90's Eagle internals Colt buffer tube, H-Buffer and spring LMT M4 Type II stock GG&G Rear Sling Thing Giles OD 3 point sling |
Its the right and duty of every American man to own and be proficient with a rifle capable of going to war.
It's not like a big wave washed my hut away - Green_Ammo_223
It's not like a big wave washed my hut away - Green_Ammo_223
Another build I did for a buddy: Base carbine is a Bushmaster XM15E2S A3 (1x9 HBAR) Samco G27 pistol grip YHM 2-pc rail system Bravo Company aluminum vertical grip EOTech 551 holographic sight ARMS #40 BUIS ACE SOCOM adjustable stock (aka "the meat tenderizer") This carbine is a bit heavier than my personal guns tend to be, but the SOCOM stock gives it a great balance and a solid feel. |
|
The top one is mine, started out as DPMS LoPro, now has new upper w/ 16" wilson fluted, YHM free floating rail, and my fav piece.... EOTech 552. The bottom is my first build, a fellow 'joe' in my unit wanted to get into them. Built all but the upper, decided with the tools i have, or lack there of, it would be easier to order the upper already complete....i haven't fired it yet, but he says she runs flawlessly..... (yes he has a rear site on it now.... http://i3.photobucket.com/albums/y87/SideBurnS19D/IMG_3099.jpg http://i3.photobucket.com/albums/y87/SideBurnS19D/AR15s.jpg |
|
Put my first AR here together on a Stag lower and used a Del-Ton 20" chrome-lined A2 kit. Came in right at $600 including shipping, just gotta get some Mags now. Threw the rest of my little arsenal in: Romanian AK, Taurus 92, Taurus 945, and a Phoenix Arms .22. Just gotta decide what to do with the other lowers now, maybe something will come to mind h.gif Henry at Title2 and Del-Ton both get a thumbs-up. Thanks http://hometown.aol.com/lbjaxfl/images/guns2.gif |
|
Here is a pic of my franken-AR... I just built the upper with a new bushy superlight. Hopefully I'll be able to zero and funx test it tomorrow afternoon. Here are the specs: Bushy lower Jewell two stage trigger surplus A1 stock with A2 but plate from Fulton Fulton A3 upper bushy superlight barrel A1 flash suppressor ARMS #40 buis Aimpoint ML2 with ARMS mount GGG sling thing CQB three point sling Weight: 8lbs unloaded with the ML2 & 7.25lbs without it. It aint pretty, but... Well, it ain't pretty.  [Edited to make the pic a bit prettier... Well, prettier background anyway.] Cheers, Chris 
|
http://www.fiftygrit.com/
|
Hmmm... With the aimpoint, buis, and sling, the bathroom scale reads 8lbs. I wouldn't trust that that is a very accurate number, but it "feels" close. It points very nicely! The lighter barrel really helps the balance. I'm excited to function test it. Cheers, Chris |
http://www.fiftygrit.com/
Here's my recent builds and for a build of a different kind click here..... TAC SLING |
Heres the progression on my build.   Cheap tasco scope and a harris bipod.  Thinking of maybe changing out the OPS for a vortex at some point and then giving it a paintjob. Also getting a sling for it.   SPR Build Upper:----------------- SNS/ Upper Receiver JP/ Stainless Tactical RRA/ Charging Handle Assembly WOA/ SPR Match Barrel RRA/ Standard Gas Tube JP/ Adjustable Gas Block SS JP/ JPHG-1 FFT, Matte Black OPS/ Muzzle Brake JP/ JPTR Tactical Rail RRA/ Forward Assist Kit RRA/ Port Door ARMS/ Lo-Pro Rear Sight, Same Plane YHM Front Sight BO/ Tactical CH Latch GenII Lower:------------------ SNS/ Stripped Lower RRA/ AR0120 Lower Parts Kit Black RRA/ ACE-ARFX Skeleton Stock RRA/ Extension Tube RRA/ Buffer RRA/ Buffer Spring MP/ Enhanced Trigger Guard JP/ Fire Control Group FS/ G27 Grip KNS/ Hammer and Trigger Pins Optics------------------ Leupold M4 4.5x14x40 PR Leupold M4 extra high rings |
"never lock the dogs when the wolf is in the darkness". -White Zombie
|
You've all seen this before.... RRA lower Model 1 16" CAR kit 
|
Lemme take a guess-you wore a lot of hockey equipment when you were young-but never played for a team?
Islam is a religion in which God requires you to send your son to die for him. Christianity is a faith in which God sent his Son to die for you.
Islam is a religion in which God requires you to send your son to die for him. Christianity is a faith in which God sent his Son to die for you.
|
My Recon work from last night... Upper: 16.1" Lilja SS barrel in 1/7.7 twist with matching bolt (Crane O-Ring installed) LMT Upper LMT Standard Bolt Carrier PRI Gas Buster Charging Handle Knight's Mid-Length FF Handguard Knight's Low Profile Gas Block Knight's QD Comp/Flash Hider Knight's 600m Rear Buis Knight's Front Flip-Up Sight Trijicon TA31F Harris Bipod w/ ARMS mount Lower: LMT Defender 2000 Lower LMT Two-Stage Triger LMT SOPMOD Stock Magpul Trigger Guard KNS Pins Ergo Grip  |
"I'll believe that when my sh*t turns purple and smells like rainbow sherbert!" - Super Troopers
POST PICS OF YOUR BUILDS HERE.....SHOW EM OFF! (Page 1 of 51)
AR Sponsor