AR Sponsor
The Bravo Company Gear Thread (Page 126 of 130)
|
Originally Posted By The-Ant1-Liberal: Searched high and low for one of these babies and found one locally...got a great price on it too. The Seller billed it as a complete up, the only problem was he didn't know what a real BCM charging handle should look like...an educated consumer is a happy consumer. https://i.imgur.com/rbuScZg.jpg?1 Current config... https://i.imgur.com/KXHMM1d.jpg |
Never confuse motion with progress; never confuse a college degree with intelligence.
Two homeowners against a mob, that's exactly what the 2A is for.
Two homeowners against a mob, that's exactly what the 2A is for.
My first BCM. The one that started this thread. Updated a little but still as reliable. 16" M4 profile upper, and BCG before they were marked. BCM carry handle. B5 enhanced SOPMOD stock body. The older I get the more I like plain. This gun is a sentimental favorite.  |
|
Man, I had a 14.5” just like that. Might have been marked MOS, can’t remember. It was old enough that I talked to Paul Buffoni himself when I bought it and PM’d him about the upper a couple of times. I painted it and ran it hard for about three years before I swapped it for a BlockII Colt upper. I had it until 2014, don’t know why I sold it. |
|
Rounded up all the stuff for another BCM. This is a SOCOM profile barrel. BCM everything with a Colt furniture set and sling swivel. I set the rear sight for 6/3-4 and it was dead on at 100 yards with the Q3131 I plan to run in it. I don’t think I’ve ever gotten that lucky!  |
Waiting on the my BCM lower to be approved, currently sitting on a Colt SBR lower.
|
"Putting a cheap scope on a good rifle is like asking to have one nut gold plated and the other crushed in a rusty vise." - HeavyMetal
"Fear the man with one gun, he will know how to use it."
"Fear the man with one gun, he will know how to use it."
|
What VFG is this? Looks killer! |
|
Originally Posted By Bartledoo: What VFG is this? Looks killer! Originally Posted By Bartledoo: What VFG is this? Looks killer! It’s a Railscales vert grip. |
|
My truck gun / home defence BCM build. Built on a BCM complete lower, added a 11.5" BCM complete upper. Modlite OKW, Q cherry bomb a whistle tip until I get the can, Reptila MRO mount and Reptila grip, arisaksa light mount and hand stop. 
|
 BCM Mark II upper receiver group. 16" government profile mid-length barrel. 13" BCM KMR Alpha Handguard (Keymod) BCM gunfighter stock, Mod 3 pistol grip, polymer trigger guard, VFG, and rail covers in Wolf Gray. There is a BCM QD sling mount on the opposite side of the rail. Fixed sights by Daniel Defense. Aimpoint PRO in its factory mount. The mount base was replaced with a QD base by Midwest Industries. |
 BCM upper receiver assembly. 16" M4 profile barrel. BCM QRF 7 free float handguard (Picatinny). BCM gunfighter Mod 3 pistol grip. BCM VFG. KAC rear sight. Aimpoint Comp-M in a LaRue mount. Surefire Scout Light on an Impact Weapons Components Thorntail SBR light mount. |
|
Originally Posted By DiveBuddy: https://i.postimg.cc/hGFzLH8r/6-B204-C3-A-E905-423-E-9087-1814-B60-F76-BC.jpg Mostly finished these two recently. The pistol is new, the 16” is an older BCM with some updates. I like those FDE rails. Looks better than tano IMO. |
|
anyone have a pic of a 13.9" barrel mated with a MCMR-13 rail? I'm looking to see how much clearance id have if I tried to use a warcomp/warden. I have a 13.9" barrel with a 13" Geissele MK4, and it's close, but I think the MCMR sides protrude further forward than the top rail thanks! |
|
Originally Posted By theJanitor: anyone have a pic of a 13.9" barrel mated with a MCMR-13 rail? I'm looking to see how much clearance id have if I tried to use a warcomp/warden. I have a 13.9" barrel with a 13" Geissele MK4, and it's close, but I think the MCMR sides protrude further forward than the top rail thanks! Criterion commented on one of their YouTube videos it’s not possible to use their 13.9 W/13” MCMR and mount a RC2. This was my plan (and have both on hand) so I’m back to looking for a new barrel or handguard for my next build. Pic thread 
|
|
Originally Posted By Novik24: https://flic.kr/p/2m7FQ5o Picture doesn't show in your post but I opened the link to see your BCM Colt Canada SFW clone. Looks great! I used to want one of those, but have moved on. |
If U can't Truck It F!@k It!
|
Attached File Attached File Attached File Attached File BCM 11.5 upper w/a Griffin RECCE 5 on a Spike’s lower. |
|
Attached File Attached File My HD bedside pistol. BCM 9” 300BLK upper w/a Griffin RECCE 7 on a B.R.O. lower. |
|
I now have one of these in hand. I have not had a chance to test it yet. 7" 300 Blackout upper, multiple rail choices. And they are in stock as of this post. I have been told that they run reliably with an H2 buffer. https://bravocompanyusa.com/bcm-standard-7-300-blackout-upper-receiver-group-w-mcmr-5-handguard/   Caliber: 300 BlackoutBarrel Length: 7" Barrel Material: 11595E Spec Steel Barrel Finish: Manganese Phosphate (Mil-Spec A-A-59267) Bore & Chamber: Chrome Lined Weight: 2.2 lbs Twist Rate: 1:7 Gas System: Pistol Muzzle Device: 762/300BLK Flash Hider Muzzle Threads: 5/8x24 Handguard: KMR-A5 |
|
Originally Posted By Vehemence: https://www.ar15.com/media/mediaFiles/317025/0C9D63C7-C656-4D09-AAD9-65F7C2609900_jpe-1991641.JPG https://www.ar15.com/media/mediaFiles/317025/A66A6487-4968-4C20-B4B6-8B14BA7FAB7F_jpe-1991642.JPG My HD bedside pistol. BCM 9" 300BLK upper w/a Griffin RECCE 7 on a B.R.O. lower. @Vehemence Which mount is under the RMR? |
|
Originally Posted By AZgunner: Painted my BCM 14.5 inch barrel upper. https://www.ar15.com/media/mediaFiles/500752/20210310_173926_jpg-1862330.JPG Looks familiar... The can will be painted to match as soon as Capitol Armory calls  
|
|
Originally Posted By Lancelot: I now have one of these in hand. I have not had a chance to test it yet. 7" 300 Blackout upper, multiple rail choices. And they are in stock as of this post. I have been told that they run reliably with an H2 buffer. https://bravocompanyusa.com/bcm-standard-7-300-blackout-upper-receiver-group-w-mcmr-5-handguard/ https://www.ar15.com/media/mediaFiles/668/STCK5433-2__52241_1619790034-2029964.jpg https://www.ar15.com/media/mediaFiles/668/STCK5441-8__42631_1619790034-2029965.jpg Caliber: 300 BlackoutBarrel Length: 7" Barrel Material: 11595E Spec Steel Barrel Finish: Manganese Phosphate (Mil-Spec A-A-59267) Bore & Chamber: Chrome Lined Weight: 2.2 lbs Twist Rate: 1:7 Gas System: Pistol Muzzle Device: 762/300BLK Flash Hider Muzzle Threads: 5/8x24 Handguard: KMR-A5 Damn, that's a short sumbitch. I'll bet she's blasty. |
Without blood, it doesn't count!
"A gun, like any other source of power, is a force for good or evil, being neither in itself, but dependent upon those who possess it."
"A gun, like any other source of power, is a force for good or evil, being neither in itself, but dependent upon those who possess it."
|
Originally Posted By Lancelot: @Vehemence Which mount is under the RMR? Only UTG mount I own, but slim, light and perfect for that pistol. UTG Super Slim Picatinny RMR Mount Attached File I think it cost a mere $20 - $30 when I bought it. I’ve had it on that setup for quite a while. |
Just messing around with stuff out of my parts box. On my BCM SBR lower.  BCM complete upper with BCM BCG and charging handle BCM complete lower (Yes it is an SBR) CAR stock body on a milspec extension. BCM Keymod rail covers BCM forwar grip Midwest Industries front sight KAC 300 rear sight Sig Romeo 5 on a LaRue T1 mount IWC top rail mounted QD sling swivel IWC / Haley Throntail 6 light mount with a Surefire Scout Light IWC QD sling swivel end plate Lancer 300 Blackout 20 round magazine This thing is so short the forward grip is really needed. The thing is so short nothing can be on the sides of the handguard without interfering with your grip. So everything gets moved up. An inline light mount would do just as well. A shorter light would be okay, but the 600 fits without running off the front of the rail. I'm still messing about with parts. We'll see how it ends up. |
|
Originally Posted By ThatGuy91K: https://i.imgur.com/8REf41q.jpg My two. Out of all the one's I have, these are the two that always get drug out and taken to the range. Nice pair. What barrel length is on the bottom one? |
Follow me on Instagram
https://www.instagram.com/olddominiongunsandgear/?hl=en
https://www.instagram.com/olddominiongunsandgear/?hl=en
|
Originally Posted By Notmynameo1: What kind of accuracy are you guys getting out of your bcm barreled uppers? https://www.ar15.com/forums/ar-15/Bravo-Company-14-5-ELW-Accuracy-A-Quick-Look/118-761690/ ... |
All that is necessary for Trolls to flourish, is for good men to do nothing.
In God We Trust. Everyone else must post data.
In God We Trust. Everyone else must post data.
|
Originally Posted By RO73: Nice pair. What barrel length is on the bottom one? Originally Posted By RO73: Originally Posted By ThatGuy91K: https://i.imgur.com/8REf41q.jpg My two. Out of all the one's I have, these are the two that always get drug out and taken to the range. Nice pair. What barrel length is on the bottom one? 14.5 |
|
Originally Posted By Molon: https://www.ar15.com/forums/ar-15/Bravo-Company-14-5-ELW-Accuracy-A-Quick-Look/118-761690/ ... Originally Posted By Molon: Originally Posted By Notmynameo1: What kind of accuracy are you guys getting out of your bcm barreled uppers? https://www.ar15.com/forums/ar-15/Bravo-Company-14-5-ELW-Accuracy-A-Quick-Look/118-761690/ ... I’ve seen that post of yours before and you wouldn’t believe how much I and others appreciate the amount of work and detail you put into it. |
The Bravo Company Gear Thread (Page 126 of 130)
AR Sponsor