User Panel
User Panel
User Panel
|
Posted: 1/21/2019 1:15:57 AM EST
[#1]
Quote HistoryQuoted:
the most recent ATF determination was that a VFG is 90 degrees to the bore, and any angle makes it an AFG and therefore GTG |
|
|
|
Posted: 1/21/2019 5:46:57 PM EST
[#2]
Quote HistoryQuoted:
@ Colby_331 With the newer brace "flaps", they appear a little thinner then the others....are you able to grip the pistol and/or fire it with the brace folded? I am wondering if they flex a little and allow your hand to fit in and grab the pistol. |
|
|
|
Posted: 1/21/2019 6:13:22 PM EST
[#3]
Thanks for the info.
Even know that isn't a deal breaker,I would really like th option to hold the gun or occasionally shoot it with one hand (right). |
|
|
|
Posted: 1/21/2019 6:17:48 PM EST
[#4]
Quote HistoryQuoted:
Thanks for the info. Even know that isn't a deal breaker,I would really like th option to hold the gun or occasionally shoot it with one hand (right). |
|
|
|
Posted: 1/21/2019 6:31:10 PM EST
[#5]
I believe I was the first to actually do the tailhook mod on the Roni......that did accomplihj one handed holding and shooting. Just wished it would have been able to lock when folded. I just lost interest. The new one with iterchangable front ends parts has gotten be slightly interested again.
I know....I am never happy 
|
|
|
|
Posted: 1/21/2019 7:04:49 PM EST
[#6]
Quote HistoryQuoted:
Thanks for the info. Even know that isn't a deal breaker,I would really like th option to hold the gun or occasionally shoot it with one hand (right). |
|
|
|
Posted: 1/21/2019 7:10:20 PM EST
[#7]
Quote HistoryQuoted: With the brace folded on the MCK, the charging handle fits into a hole on the side of the brace, and locks the charging handle in the forward position (can't cycle the charging handle without unlocking the brace from the folded position). My problem is that I want it to be something it's not. It is geeat the way it is, but in my mind, I am thinking/wanting it to be more of a USW type PDW. I just need to sell an organ or something 
The flux brace may be my answer, but too new for me to invest. In case anyone is interested....it is posted elsewhere too. |
|
|
|
Posted: 1/21/2019 7:56:26 PM EST
[#8]
Quote HistoryQuoted:
https://i0-wp-com.cdn.ampproject.org/i/s/i0.wp.com/caagearup.com/wp-content/uploads/csm/Micro_Roni_G4_website.jpg?fit=1024%2C469&ssl=1 Looking at a Roni but I'm not a fan of the angled grip. Two questions if anyone knows: 1. Does the spare mag holder on this count as a vfg? (I know the stock makes it NFA but I would replace that with a brace.) 2. I've got suppressor height sights on my Glock 19, would those work in the chassis without too much modification? (Don't want to remove the sights, but I am ok with dremeling some material out of the inside if I have to.) 
|
|
|
|
Posted: 1/21/2019 8:05:05 PM EST
[#9]
Quote HistoryQuoted:
I believe I was the first to actually do the tailhook mod on the Roni......that did accomplihj one handed holding and shooting. Just wished it would have been able to lock when folded. I just lost interest. The new one with iterchangable front ends parts has gotten be slightly interested again. I know....I am never happy Where are you finding the info on the new unreleased model with interchangeable afg? |
|
|
|
Posted: 1/21/2019 8:21:48 PM EST
[#10]
|
|
|
|
Posted: 1/21/2019 8:24:13 PM EST
[#11]
Quote HistoryQuoted:
With the brace folded on the MCK, the charging handle fits into a hole on the side of the brace, and locks the charging handle in the forward position (can't cycle the charging handle without unlocking the brace from the folded position). Quote HistoryQuoted:
Quoted:
Thanks for the info. Even know that isn't a deal breaker,I would really like th option to hold the gun or occasionally shoot it with one hand (right). I was going to remove that right side charging handle finger from the plastic charging handle snap on thingy. |
|
|
|
Posted: 1/21/2019 8:54:40 PM EST
[#12]
Quote History Now I wonder how long the pre order is going to take!!! |
|
|
|
Posted: 1/21/2019 8:56:07 PM EST
[#13]
Quote HistoryQuoted:
Gee thanks... make me spend my $ Now I wonder how long the pre order is going to take!!! Quote HistoryQuoted:
Gee thanks... make me spend my $ Now I wonder how long the pre order is going to take!!! That is the golden question! |
|
|
|
Posted: 1/21/2019 9:08:54 PM EST
[#14]
Don't forget about the MLK discount code..
|
|
|
|
Posted: 1/21/2019 9:15:48 PM EST
[#15]
Quote HistoryQuoted:
Don't forget about the MLK discount code.. |
|
|
|
Posted: 1/21/2019 9:18:55 PM EST
[#16]
Quote HistoryQuoted:
It didn’t work on the pre order. I tried Quote HistoryQuoted:
Quoted:
Don't forget about the MLK discount code.. |
|
|
|
Posted: 1/21/2019 9:19:39 PM EST
[#17]
Quote HistoryQuoted:
Are you on the list? Quote HistoryQuoted:
Quoted:
Quoted:
Don't forget about the MLK discount code.. |
|
|
|
Posted: 1/21/2019 9:21:49 PM EST
[#18]
Quote HistoryQuoted:
I preordered, I registered an account too. I didn’t seem to get the 10% off either. I have no idea why. I plan to call them or email them. Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
Don't forget about the MLK discount code.. |
|
|
|
Posted: 1/21/2019 9:37:02 PM EST
[#19]
Quote HistoryQuoted:
I forgot that part too...haha. My problem is that I want it to be something it's not. It is geeat the way it is, but in my mind, I am thinking/wanting it to be more of a USW type PDW. I just need to sell an organ or something
The flux brace may be my answer, but too new for me to invest. In case anyone is interested....it is posted elsewhere too. Quote HistoryQuoted:
Quoted: With the brace folded on the MCK, the charging handle fits into a hole on the side of the brace, and locks the charging handle in the forward position (can't cycle the charging handle without unlocking the brace from the folded position). My problem is that I want it to be something it's not. It is geeat the way it is, but in my mind, I am thinking/wanting it to be more of a USW type PDW. I just need to sell an organ or something
The flux brace may be my answer, but too new for me to invest. In case anyone is interested....it is posted elsewhere too. ETA: And holsterable, too. That's a pretty big advantage over the RONI. |
|
|
|
Posted: 1/21/2019 9:37:28 PM EST
[#20]
I just called the rep in the USA, he said because they are already discounted the 10% does not apply. He said two weeks for the pre order. Let’s see if that’s correct!
|
|
|
|
Posted: 1/21/2019 9:38:48 PM EST
[#21]
to everyone who asked if the new interchangeable mag holder is vertical, the answer is no. It's is definitely angled less than 90 in the pics I've seen that are side-on. So it's GTG with a brace.
|
|
|
|
Posted: 1/27/2019 3:09:36 PM EST
[#22]
Quote HistoryQuoted:
Thanks for the info. Even know that isn't a deal breaker,I would really like th option to hold the gun or occasionally shoot it with one hand (right).
|
|
|
|
Posted: 1/27/2019 3:17:28 PM EST
[#23]
Quote HistoryWhy a new model again? |
|
|
|
Posted: 1/27/2019 3:37:50 PM EST
[#24]
Quote HistoryQuoted: What happened to the MCK? Why a new model again? I could be completely wrong, but I think the model YRS is taking pre-orders on, is a model that CAA is making for other markets, and YRS is importing it to the US. |
|
|
|
Posted: 1/27/2019 4:33:50 PM EST
[#25]
Quote HistoryQuoted:
Isn't that the point of the brace? Quote HistoryQuoted:
Quoted:
Thanks for the info. Even know that isn't a deal breaker,I would really like th option to hold the gun or occasionally shoot it with one hand (right). |
|
|
|
Posted: 2/6/2019 10:25:59 AM EST
[#26]
My new kit: G19.4 + New MCK + Thumb Rest (L) + TRL-4 (R) + Romeo5 + MBUS
Fun Details: RD and BUIS are absolute co-witnessed, TRL laser is bore-sighted to 7yds, BUIS bore-sighted to 14yds, RD is bore-sighted to 21yds Issues: 1) There is 2-3mm of noticeable play in the lock-up between my G19 and the MCK chassis. The play is up/down (vs. left/right) and is most easily experienced when pushing up or down on the charging handle (vs. pulling back to cock). Is this normal or do I have a problem here? FYSA the MCK locking mechanism is 100% fully seated and stable. 2) I’m running ETS 31rd G18 mags which are very difficult to remove from the spare magazine holder. Impossible without some very stout/violent shaking/wiggling of the magazine. Is this something that is expected to get smoother over time or should I do something like back out the lower MCK frame support screws just a hair to proactively correct? Thanks all. |
|
|
|
Posted: 2/6/2019 5:07:04 PM EST
[#27]
Quote HistoryQuoted:
My new kit: G19.4 + New MCK + Thumb Rest (L) + TRL-4 (R) + Romeo5 + MBUS Fun Details: RD and BUIS are absolute co-witnessed, TRL laser is bore-sighted to 7yds, BUIS bore-sighted to 14yds, RD is bore-sighted to 21yds Issues: 1) There is 2-3mm of noticeable play in the lock-up between my G19 and the MCK chassis. The play is up/down (vs. left/right) and is most easily experienced when pushing up or down on the charging handle (vs. pulling back to cock). Is this normal or do I have a problem here? FYSA the MCK locking mechanism is 100% fully seated and stable. 2) I'm running ETS 31rd G18 mags which are very difficult to remove from the spare magazine holder. Impossible without some very stout/violent shaking/wiggling of the magazine. Is this something that is expected to get smoother over time or should I do something like back out the lower MCK frame support screws just a hair to proactively correct? Thanks all. |
|
|
|
Posted: 2/6/2019 5:18:47 PM EST
[#28]
|
|
|
|
Posted: 2/7/2019 6:51:00 AM EST
[#29]
What type of QD swivel is compatible with this?
I bought one and it didn’t work. ?????????? |
|
|
|
Posted: 2/7/2019 7:36:42 AM EST
[#30]
The problem with the QD socket is, In my opinion, dimensionally out of spec.
The hole is too tall and the spring loaded ball that is part of the swivel does not go deep enough to get pass the recess that locks into.. The fix.... - Some use the Magpul lock in swivel hoop - others purchase the one CAA sells - some try different make/models until the find one that fits or the fix I used is to file down the QD socket and the surrounding plastic, slowly and checking with your QD swivel, until it locks in...then all your swivels will work. I don't know if this was intentional by CAA so you had to purchase there's, or they did not have the right tolerances when they machined the socket and molded it into the Chassis. |
|
|
|
Posted: 2/7/2019 7:46:17 AM EST
[#31]
Quote HistoryQuoted:
The problem with the QD socket is, In my opinion, dimensionally out of spec. The hole is too tall and the spring loaded ball that is part of the swivel does not go deep enough to get pass the recess that locks into.. The fix.... - Some use the Magpul lock in swivel hoop - others purchase the one CAA sells - some try different make/models until the find one that fits or the fix I used is to file down the QD socket and the surrounding plastic, slowly and checking with your QD swivel, until it locks in...then all your swivels will work. I don't know if this was intentional by CAA so you had to purchase there's, or they did not have the right tolerances when they machined the socket and molded it into the Chassis. |
|
|
|
Posted: 2/7/2019 8:15:35 AM EST
[#32]
Quote HistoryQuoted:
The problem with the QD socket is, In my opinion, dimensionally out of spec. The hole is too tall and the spring loaded ball that is part of the swivel does not go deep enough to get pass the recess that locks into.. ...The fix I used is to file down the QD socket and the surrounding plastic, slowly and checking with your QD swivel, until it locks in...then all your swivels will work. |
|
|
|
Posted: 2/7/2019 10:48:50 AM EST
[#33]
Anyone else noticing this...?
There is 2-3mm of noticeable play in the lock-up between my G19 and the MCK chassis. The play is up/down (vs. left/right) and is most easily experienced when pushing up or down on the charging handle (vs. pulling back to cock). Is this normal or do I have a problem here? FYSA the MCK locking mechanism is 100% fully seated and stable - the play is strictly between my the Glock and MCK chassis. |
|
|
|
Posted: 2/7/2019 11:01:27 AM EST
[#34]
Quote HistoryQuoted:
Anyone else noticing this...? There is 2-3mm of noticeable play in the lock-up between my G19 and the MCK chassis. The play is up/down (vs. left/right) and is most easily experienced when pushing up or down on the charging handle (vs. pulling back to cock). Is this normal or do I have a problem here? FYSA the MCK locking mechanism is 100% fully seated and stable - the play is strictly between my the Glock and MCK chassis. |
|
|
|
Posted: 2/11/2019 9:54:23 AM EST
[#35]
I special ordered a MCK with the short stab, and it’s finally on the way. Hopefully midweek.
|
|
|
|
Posted: 2/13/2019 3:21:09 PM EST
[#36]
Ordered an MCK from lockedloaded.com and it arrived today, new and unopened. Took it out of the package and the stabilizer lock button and 2 springs fell out of the brace. I put it back together and they fell out again. The catch on the inside isn't holding the button in place in the button socket on the brace. I can replace the button/springs and lock it in the extended position, but folding the brace drops all the parts out again. Pretty disappointed. I have an email to CAA to see if they'll take care of it.
EDITED TO ADD: Just as I finished typing this I received an email from CAA that they are sending a new button assembly for the brace. |
|
|
|
Posted: 2/13/2019 4:18:45 PM EST
[#37]
Quote HistoryQuoted:
Ordered an MCK from lockedloaded.com and it arrived today, new and unopened. Took it out of the package and the stabilizer lock button and 2 springs fell out of the brace. I put it back together and they fell out again. The catch on the inside isn't holding the button in place in the button socket on the brace. I can replace the button/springs and lock it in the extended position, but folding the brace drops all the parts out again. Pretty disappointed. I have an email to CAA to see if they'll take care of it. EDITED TO ADD: Just as I finished typing this I received an email from CAA that they are sending a new button assembly for the brace. Mine just jams when using 33rnd magazines for whatever reason. |
|
|
|
Posted: 2/14/2019 8:21:26 PM EST
[#38]
How do you SBR a Glock? Where does the engraving go?
|
|
|
|
Posted: 2/15/2019 12:41:40 PM EST
[#39]
My G17 is laser engraved on the bottom of the trigger guard
|
|
|
|
Posted: 2/15/2019 1:07:11 PM EST
[#40]
Quote HistoryQuoted:
My G17 is laser engraved on the bottom of the trigger guard |
|
|
|
Posted: 2/15/2019 2:11:48 PM EST
[#41]
Ordered an MCK from Rainier the other day. Due to be delivered to work tomorrow, means Ill be able to check it out Monday.
Also ordered a few of the accessories straight from CAA due next week too. |
|
|
|
Posted: 2/15/2019 2:15:10 PM EST
[#42]
Quote HistoryQuoted: I thought the engraving had to be in metal? |
|
|
|
Posted: 2/15/2019 4:57:20 PM EST
[#43]
So the G4 was only out for a few months, then CAA drops the G4 and YRS may continue to bring in the G4, the MCK supposed to be considered the G5 but is only out for a few months and may already be set to be replaced by a different MCK variant? Do I have that right?
|
|
|
|
Posted: 2/15/2019 5:25:31 PM EST
[#44]
Quote HistoryQuoted:
So the G4 was only out for a few months, then CAA drops the G4 and YRS may continue to bring in the G4, the MCK supposed to be considered the G5 but is only out for a few months and may already be set to be replaced by a different MCK variant? Do I have that right? |
|
|
|
Posted: 2/18/2019 9:39:35 PM EST
[#45]
Any links on a newer MCK variant?
|
|
|
|
Posted: 2/19/2019 1:28:56 PM EST
[#46]
MCK came today. Accesories came yesterday. Got it all together minus my sight which should be here tomorrow. I can tell already Im going to have a lot of fun with this.
Just from handling it. The Glock 17 in it locks up tight and it feels pretty solid. |
|
|
|
Posted: 2/20/2019 8:55:24 AM EST
[#47]
Quote HistoryQuoted:
So the G4 was only out for a few months, then CAA drops the G4 and YRS may continue to bring in the G4, the MCK supposed to be considered the G5 but is only out for a few months and may already be set to be replaced by a different MCK variant? Do I have that right? |
|
|
|
Posted: 2/20/2019 9:01:57 AM EST
[#48]
Quote HistoryQuoted:
What is the different MCK variant? Do you have a link that shows the newer version? Quote HistoryQuoted:
Quoted:
So the G4 was only out for a few months, then CAA drops the G4 and YRS may continue to bring in the G4, the MCK supposed to be considered the G5 but is only out for a few months and may already be set to be replaced by a different MCK variant? Do I have that right? |
|
|
|
Posted: 2/22/2019 12:25:28 AM EST
[#49]
How is the MCK different from the Gen 4 CAA Gear Micro Roni Stabilizer? Is it just the 45 degree vertical magazine holder?
|
|
|
|
Posted: 2/23/2019 8:30:46 AM EST
[#50]
Quote HistoryQuoted:
How is the MCK different from the Gen 4 CAA Gear Micro Roni Stabilizer? Is it just the 45 degree vertical magazine holder? |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
