Armory Sponsor
Posted: 4/5/2024 10:13:03 PM EDT
|
Also placed them and I also need to make it complete TIA   ———-       |
Arfcom's resident Mortgage guy and VA specialist
|
Originally Posted By KitBuilder: First one is a German G1 lower. Second is L1A1 lower. Looks to be UK production. Barrel assembly is G1 also. (There's only 1 barrel assembly pictured, right?) 2 barrels  
|
Arfcom's resident Mortgage guy and VA specialist
|
Think those are both G1 barrels, though I know some other lugged barrels exist, just am not familiar with them. But with the stamps from first pics, looks Belgian made for the German contract. G1 lower, and an L1A1 (inch lower). So pretty much agreeing with the other poster. The G1 barrels might be some of the fairly worn ones where there is so much wear in the gas block/piston situation that you might need to open up the gas port a bit for good operation. Most that made it to the US were like that. Also not the most accurate barrels in my opinion due to the muzzle device mounting method. |
a loaded gun won’t set you free, so they say…
|
Originally Posted By PreachermanMATT: Also placed them and I also need to make it complete From the pics, you are missing the pivot pins, handguards, and handguard screws. Are you trying to make 2 complete rifles? You have 2 metric barrels, but one metric lower and one inch lower. The sights on the inch pattern rifles are taller than the metric version, so the inch lower won't just work with one of the metric uppers without at least an metric rear sight. You are also missing the complete bolt carrier assemblies, charging handles, bolt release, mag catches, top covers, locking shoulders, and related springs. Basically everything that goes into the missing upper receivers. |
Armory Sponsor