Armory Sponsor
Posted: 3/31/2024 8:17:26 PM EDT
[Last Edit: Romano316][Edited]
|
Thanks for looking. (I looked through the forum and last 3-4 pages of the pinned thread). This summer I rattle canned a few knife sheaths in Multicam and was happy with the results. Here is a sheath on my belt next to some Esstac gear and Mechanix gloves in Multicam pattern. Attached File I then tried M81 and was not too happy with the results. My self critique is the sand color is too bright, green is too olive and not enough forest, and the brown is too chocolaty. Attached File Overall, I am not displeased, but have a few more sheaths to do in M81 and want to try some new colors, without going back to the drawing board or buying a ton of different colors to test.. My question for those that feel you successfully replicated M81: what colors did you use, and can you post some pictures if you have them? Thanks! |
|
Originally Posted By NotIssued: My question is how you get the paint to stay on? I sprayed down a sheath a few years ago when "tan" of some sort and it was scratching off in a few hours. Was the plastic black sheath that Fallkniven sells, and I was overseas, so kind of ran with what I found. I did a very thorough prep with acetone and handled the sheath with gloves after that. I let the paint sit overnight before putting the next set of stickers or coat of paint on it. I did 3-4 coats of flat matte clear coat after, front & back. The finish is relatively impact & scratch resistant, but very susceptible to heavy duty solvents. You can see a few scratches, but whatever. |
|
I agree with your assessments on the colors, especially the sand. Gun shops, and especially bow shops, often carry rattle cans of paint in typical camo colors that would probably be more to your liking. Sorry, I don't have make/model info, though. Rustoleum also makes a "camouflage" line that may work for you. Hunters Specialties also makes a line:  
As does Krylon |
“As long as none of us gets hurt, we’re making memories.” - one GA trooper to another after shooting HOSTAGE 9 times
Their SHAME has become their PRIDE
Their SHAME has become their PRIDE
|
A few months ago I did an AR in M81 using only Krylon camouflage spray paints and Freedom Stencils. I used their camo Khaki for the light color as their Sand color is way too light, camo brown, and camo olive. The black is the original finish of the AR as I didn't feel like adding another layer of paint to to do black. Attached File Attached File |
I carry a gun because a cop is too heavy.
|
Originally Posted By 11B3XCIB: The only one under the “camo” line I used was Rustoleum Camo Khaki. The green I used Krylon Italian Olive, and for brown, Rustoleum Nutmeg with a clear coat matte over the top when it’s done https://i.imgur.com/aa5Fu1R.jpeg That looks great. |
Armory Sponsor