Armory Sponsor
Posted: 7/31/2026 4:24:51 PM EDT
|
Is this a feasible project? Where do you get the receiver? https://atlanticfirearms.com/iwi-tavor-ctar-21-556mm-parts-kit-w-populated-barrel |
|
Originally Posted By willi3d: What is a “populated” barrel? I’d guess that means all the stuff is still attached to it and not stripped down. Im probably in the minority, but I’m not sure I see the appeal of these, at least until someone can determine what’s compatible with a SAR. Even then, a 15” vs 16” barrel isn’t a huge difference. You could get a new optic rail for the SAR to mimic the IDF look. Kinda like the Malay AUG kits, none of those parts aside from a useless handful were compatible with the domestic semi-auto AUGs. |
Support the Firearms Policy Coalition and help save the Second Amendment: https://www.firearmspolicy.org
The opinions expressed here are my own and do not necessarily reflect the views of my employer or their customers.
The opinions expressed here are my own and do not necessarily reflect the views of my employer or their customers.
|
Originally Posted By ATLANTIC-FIREARMS: https://atlanticfirearms.com/modules/ps_imageslider/images/6425bed44c398c519860abeeb86cac5c74b70099_Tavor-21-Kit_Banner.jpg Will these kits work as a spare parts kit for an SAR? |
|
Originally Posted By Findsman: I’d guess that means all the stuff is still attached to it and not stripped down. Im probably in the minority, but I’m not sure I see the appeal of these, at least until someone can determine what’s compatible with a SAR. Even then, a 15” vs 16” barrel isn’t a huge difference. You could get a new optic rail for the SAR to mimic the IDF look. Kinda like the Malay AUG kits, none of those parts aside from a useless handful were compatible with the domestic semi-auto AUGs. Originally Posted By Findsman: Originally Posted By willi3d: What is a “populated” barrel? I’d guess that means all the stuff is still attached to it and not stripped down. Im probably in the minority, but I’m not sure I see the appeal of these, at least until someone can determine what’s compatible with a SAR. Even then, a 15” vs 16” barrel isn’t a huge difference. You could get a new optic rail for the SAR to mimic the IDF look. Kinda like the Malay AUG kits, none of those parts aside from a useless handful were compatible with the domestic semi-auto AUGs. Those kits were very popular with the 3d print community. I say "were" as they have dried up from said community. |
Joined:
Dec 2022
Posts:
166
EE: 0% (0)
UT, USA
|
Originally Posted By bluemax_1: @ATLANTIC-FIREARMS Will these kits work as a spare parts kit for an SAR? Some parts will. Trigger pack won't as it's a different shape Bolt carrier will have full auto trip so it won't fit in a sa receiver, but can be ground off. Polymer stock should, based on my experience with X95s, if anything I may need some fitting. Rest of the parts should be interchangeable. |
Armory Sponsor