Armory Sponsor
Posted: 8/19/2026 7:15:01 PM EDT
[Last Edit: LOS][Edited]
|
I purchased my AP5 and AP5P back when Atlantic first started importing them from Turkey. I SBRd them just a few months of ownership. They’re both tack drivers and they’ve been absolutely issue free from the get go. In the last few years I’ve had them set up with a variety of stocks but I think the wood stocks are going to end up being the final configuration. The stock on the AP5P is a folder. The one on the AP5 is fixed. They really make the tiny rifles feel solid on the shoulder and they definitely distribute and soften recoil much better. They also offer a fantastic cheek weld, and they look great to boot! Here’s a few pics ..    |
|
Originally Posted By Totenpfeifer: Beautiful! Built a set for my MP5 from Cetme wood furniture. Just picked up another Cetme wood set, if you want one buy now price is creeping up. Hk parts has HK surplus stocks and new ones available. They’re a little pricey as the sell them with the end caps and springs. |
|
Originally Posted By LOS: The stock was purchased at A3 Industries. It comes with the folding mechanism installed. Originally Posted By LOS: Originally Posted By osprey21: Nice. What folding mechanism did you use on the 'K' ? The stock was purchased at A3 Industries. It comes with the folding mechanism installed. |
Now with more political fatigue.
Joined:
Sep 2023
Posts:
42
EE: 0% (0)
TN, USA
|
Originally Posted By LOS: Im also going to install a wood stock on the 51.. My shoulder and chin doesn’t like the A3 too much. :) https://imagizer.imageshack.com/v2/800x1200q70/921/YUdFnf.jpg @LOS - That light looks like it might get "toasty" from muzzle blast : ) Does the light hold up? |
|
Attached File Stay tuned, more to come on this….. |
|
Sexy ! |
|
Originally Posted By neight: https://www.ar15.com/media/mediaFiles/244521/IMG_8340_jpeg-3818422.JPG Stay tuned, more to come on this….. Very nice. Wolfman? |
|
Originally Posted By neight: https://www.ar15.com/media/mediaFiles/244521/IMG_8340_jpeg-3818422.JPG Stay tuned, more to come on this….. Where did you find the connector between the stock and receiver to mate a wooden stock to an MP5? |
Those who cannot remember the past are condemned to repeat it.
|
Originally Posted By Seven-Shooter: Where did you find the connector between the stock and receiver to mate a wooden stock to an MP5? Or you can skip the modding if you can find an old HK33/93 stock metal end cap. |
|
Originally Posted By LOS: I haven’t fired it with the 628 attached but I’ll bet it’ll roast nicely after a range outing, assuming it even survives. :) Originally Posted By LOS: Originally Posted By cherenkov: @LOS - That light looks like it might get "toasty" from muzzle blast : ) Does the light hold up? I haven’t fired it with the 628 attached but I’ll bet it’ll roast nicely after a range outing, assuming it even survives. :) |
Now with more political fatigue.
|
Originally Posted By Seven-Shooter: Where did you find the connector between the stock and receiver to mate a wooden stock to an MP5? The stock I found on some importers sight and the endcap was a hk parts buy. There was a thread similar to this one on wood but I can’t find it. Must’ve gone to the archives. There is a lot of play between the cap and receiver and the stock bottomed out a few 32nds shy of flushing out with the back edge of the cap. I wish I thought to check it before I drove it on there. Now I’m not sure there’s any getting it off |
|
Originally Posted By osprey21: That light is gonna get smoked in short order. Originally Posted By osprey21: Originally Posted By LOS: Originally Posted By cherenkov: @LOS - That light looks like it might get "toasty" from muzzle blast : ) Does the light hold up? I haven’t fired it with the 628 attached but I’ll bet it’ll roast nicely after a range outing, assuming it even survives. :) I agree. I’m not sure I’ll take that chance. |
|
Attached File Now with RAS! How well does your surplus end cap fit? I need to get the play out of this one. Also think I might paint it but I kinda like the parkerizing. |
|
Originally Posted By neight: https://www.ar15.com/media/mediaFiles/244521/IMG_8343_jpeg-3818866.JPG Now with RAS! How well does your surplus end cap fit? I need to get the play out of this one. Also think I might paint it but I kinda like the parkerizing. Your MP5 looks pretty damn good with the RAS. The end cap has a little play on my mp5 but I wouldn’t say it’s a loose fit. Still debating If I should take the stock off and install it on my 51. decisions, decisions.. |
|
Thanks! I’ve been squirreling away parts for a couple years. Only just now got around to the form one. I have a proper drum to put on it too. But wondering if I’d like this open top one better with a red dot on it. Also, only paint the cap! Not painting this Fräulein!! |
|
Attached File MAC5 converted Cetme wood. Just got another wood set. Have to figure out if it’s going on the 91 or 93. |
|
Originally Posted By Totenpfeifer: https://www.ar15.com/media/mediaFiles/75583/IMG_9215_jpeg-3822494.JPG MAC5 converted Cetme wood. Just got another wood set. Have to figure out if it’s going on the 91 or 93. That looks fantastic! The next step is a metal grip housing with a wood grip. |
|
Originally Posted By neight: Really?! Where do you get one of those? Originally Posted By neight: Originally Posted By Totenpfeifer: Got a metal SEF housing on the way. Really?! Where do you get one of those? I used a G3 lower for my MP5k, just cut off the back and drilled a new hole. 
|
|
Originally Posted By neight: Really?! Where do you get one of those? https://www.gatewoodsupplyco.com/HK91-G3-SEF-Lower-Housing--Steel_p_6991.html |
Now with more political fatigue.
|
Originally Posted By Totenpfeifer: https://www.ar15.com/media/mediaFiles/75583/IMG_9215_jpeg-3822494.JPG MAC5 converted Cetme wood. Just got another wood set. Have to figure out if it’s going on the 91 or 93. It looks like for the handguard, you trimmed off the back and reused the front of the CETME wood, is that correct? Why that instead of the other way around? |
Those who cannot remember the past are condemned to repeat it.
Armory Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter