Armory Sponsor
Post your gear porn here!!!!! Part two. (Page 5 of 166)
|
Originally Posted By preditor556:
41mag how do you like that kit? I saw it on there site and thinking about for a back up kit. Well, it wasn't cheap, but it seems very well made, and not bulky. Straps are easy to adjust. It only holds a small water bladder, 1 liter, but that's fine by me. There is lots of water in my area, and a Katadyn filter is going in my backpack. I hope to use it in some training courses soon. The add on pouches were ordered from SKD, and are ESSTAC brand. These also seem to be very well made, and have the malice clips built in for easy attachment. Both SKD and Bravo Company shipped FAST. |
|
Originally Posted By preditor556:
I love mine. Funny story: My family has always been pro gun. Each x-mas my mom asks me what gun related item I want. Only rule is that it can't be a gun. Last year it was a new plate carrier. This year its plates. Well here is my current kit. http://i493.photobucket.com/albums/rr300/preditor556/photo-12.jpg May I ask where you got the pad that goes over your left shoulder buckle? Does it help? I have an Eagle industries plate carrier (shown below) and the buckles are a P.I.T.A. when shouldering a rifle. Pic thread: 
|
|
Originally Posted By NextGen:
Originally Posted By preditor556:
I love mine. Funny story: My family has always been pro gun. Each x-mas my mom asks me what gun related item I want. Only rule is that it can't be a gun. Last year it was a new plate carrier. This year its plates. Well here is my current kit. http://i493.photobucket.com/albums/rr300/preditor556/photo-12.jpg May I ask where you got the pad that goes over your left shoulder buckle? Does it help? I have an Eagle industries plate carrier (shown below) and the buckles are a P.I.T.A. when shouldering a rifle. Pic thread: http://i276.photobucket.com/albums/kk26/ret13yrs/DSC_5410.jpg It came with the vest when i bought it. It works awesome. I tried shouldering my weapon without thinking about the pad and it never went right in the grooves, but it is 110% better then when I tried without the pad. The stock slides all over the buckle. with buckle= great w/o buckle= P.I.T.A. |
"sleep is for the weak, that's when they get you"
|
Originally Posted By NextGen:
Originally Posted By preditor556:
I love mine. Funny story: My family has always been pro gun. Each x-mas my mom asks me what gun related item I want. Only rule is that it can't be a gun. Last year it was a new plate carrier. This year its plates. Well here is my current kit. http://i493.photobucket.com/albums/rr300/preditor556/photo-12.jpg May I ask where you got the pad that goes over your left shoulder buckle? Does it help? I have an Eagle industries plate carrier (shown below) and the buckles are a P.I.T.A. when shouldering a rifle. Pic thread: http://i276.photobucket.com/albums/kk26/ret13yrs/DSC_5410.jpg Thats one of the main points I went with that one. You can use an inner tube and that helps a little. |
Only fear and lack of skill drives men to want bigger calibers.
The rack... an eagle all molle universal chest rig, HSGI mini eod pouch, tactical tailor mag shingle x2, hsgi radio pouch, hsgi bleeder. compass, batteries, binos, medical gloves, tourniquet (I don't have any of my med supplies here), etc. Gerber gladiator or guardian knife, can't remember what it's called, behind the eod pouch. 
The plate carrier... hsgi weesatch with the side sapi adapter, hsgi hydration pouch with 3L omega, esstac utility pouches on the side sapi adapters, the skd double mag bungees, soft armor in the side sapi adapters, no plates (I don't have them here). Hsgi shoulder pads. Most of it purchased from SKD, great service. |
|
Originally Posted By Blacktide: I can hook u up with an H-Harness for that Eagle rig.. http://i173.photobucket.com/albums/w72/enderwood/chestrig.jpg The rack... an eagle all molle universal chest rig, HSGI mini eod pouch, tactical tailor mag shingle x2, hsgi radio pouch, hsgi bleeder. compass, batteries, binos, medical gloves, tourniquet (I don't have any of my med supplies here), etc. Gerber gladiator or guardian knife, can't remember what it's called, behind the eod pouch. http://i173.photobucket.com/albums/w72/enderwood/platecarrier.jpg The plate carrier... hsgi weesatch with the side sapi adapter, hsgi hydration pouch with 3L omega, esstac utility pouches on the side sapi adapters, the skd double mag bungees, soft armor in the side sapi adapters, no plates (I don't have them here). Hsgi shoulder pads. Most of it purchased from SKD, great service.  CXS |
Topher DiMauro
You know my business, and how to get a hold of me..
You know my business, and how to get a hold of me..
|
Originally Posted By Custom-X_Sponjah:
Originally Posted By Blacktide:
I can hook u up with an H-Harness for that Eagle rig.. http://i173.photobucket.com/albums/w72/enderwood/chestrig.jpg The rack... an eagle all molle universal chest rig, HSGI mini eod pouch, tactical tailor mag shingle x2, hsgi radio pouch, hsgi bleeder. compass, batteries, binos, medical gloves, tourniquet (I don't have any of my med supplies here), etc. Gerber gladiator or guardian knife, can't remember what it's called, behind the eod pouch. http://i173.photobucket.com/albums/w72/enderwood/platecarrier.jpg The plate carrier... hsgi weesatch with the side sapi adapter, hsgi hydration pouch with 3L omega, esstac utility pouches on the side sapi adapters, the skd double mag bungees, soft armor in the side sapi adapters, no plates (I don't have them here). Hsgi shoulder pads. Most of it purchased from SKD, great service.
CXS Oh hell yeah. |
|
Which molle chest rig is that you're using Liberty057? (looks nice)
It's actually the Eagle Industries LE Active Shooter Chest Rig. It's a bit different than the universal version... http://www.skdtac.com/Eagle_LE_Active_Shooter_Chest_Rig_p/eag.670.htm |
"The very atmosphere of firearms anywhere and everywhere restrains evil interference - they deserve a place of honor with all that's good" -- George Washington
|
Originally Posted By jinx667:
http://img.photobucket.com/albums/v280/jinx667/DSC01050.jpg TAG Gladiator Eagle LVAC Very nice, I'm about to get an LVAC myself, I had to sell my PACA lowvis and I can't find another one, so its good to see some people that use them |
|
love my LVAC. Originally Posted By reddeth: Originally Posted By jinx667: http://img.photobucket.com/albums/v280/jinx667/DSC01050.jpg TAG Gladiator Eagle LVAC Very nice, I'm about to get an LVAC myself, I had to sell my PACA lowvis and I can't find another one, so its good to see some people that use them |
Here is my current setup. I originally was running an Eagle Ciras and found it to be a little too big and restrictive. I recently picked up an Eagle quick release Plate carrier and found it to be a cross between the MARCIRAS and Eagle plate carrier. The release system is the exact same as the MARCIRAS and allows for easy adjustment. The Release system allows you to route the cable through the front top like the ciras or off to the right or left side, out of the way. All an all another win for Eagle, I’m not sure if this will become a production model or was just a demo but this would have been a great alternative to the Army’s KDH plate carrier (just sayin). Also my kit has had alot of use since the pic was taken.
1st Line -TAG padded MOLLE patrol belt - ICE double quick draw pouch - Khaki unknown dump pouch 2nd Line - Eagle industries Quick Release plate carrier S/M with Small ESAPI’s - 2X Eagle FB M4 mag pouch - 3X Eagle open top mag pouch - 1X Eagle double M4 mag pouch - 1X S.O. Tech IFAK - 1X Eagle Canteen/GP pouch - 1X TT 1V pouch - PACA Low Vis armor carrier w/ small BALCS armor. http://img710.imageshack.us/img710/9883/dscn0721q.jpg |
|
Originally Posted By NapeSticksToKids:
whered you get the PC from? did a google search and came up dry. great looking kit though! I got it from a guy that buy's allot of Eagle limited run/prototype/Military over-run gear. After further research on my part, it was the design submitted by eagle for the ARMY PC competition. |
How about some "old school" ABA SEAL gear just for fun:
I live within 20 miles of at least 15 different military bases of all branches to include 3 SEAL teams so tactical/militaria is everywhere around here. LBT and Blackhawk are also within 10 miles of my house so I get tons of their stuff too. At one time I had almost a whole garage full of large boxes full of every type of LBT made gear you can think of and some special made stuff for certain military groups that you wouldn't think of. I've sold most of it now but still have more than I'll ever need/use left. |
|
Blacktide-
How do you like the side adapters? I just talked to Topher about adapting them as a cummerbund. Is it easier to adjust? I don't have plates and don't have any problems with sagging, just being able to adjust it when I first put it on. I should have ordered it when I had him on the phone. RT |
|
Originally Posted By Epicurus:
Blacktide- How do you like the side adapters? I just talked to Topher about adapting them as a cummerbund. Is it easier to adjust? I don't have plates and don't have any problems with sagging, just being able to adjust it when I first put it on. I should have ordered it when I had him on the phone. RT They make it a little easier to clip in because the buckles are easier to reach. Mine is pretty close to as tight as possible (im not a big guy) so I don't need to adjust it much. |
|
Originally Posted By Custom-X_Sponjah:
Smallest chest Rig on Earth.... http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs485.snc3/26543_119744504703901_111845712160447_279446_5142988_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs485.snc3/26543_119744538037231_111845712160447_279447_3777429_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs485.ash1/26543_119744554703896_111845712160447_279448_1237759_n.jpg CXS that is one tiny rig. I like it. |
fidelis ut meus infortunatus terra
|
Interesting. That might be totally tits for low pro. Can you put them next to each other?
I would loop elastic on the bottom and hold that smoke horizontal.... Nice. |
Being a contributing member means you contribute – to a TECH FORUM...
"If another mod is needed the current mod will let us know." TBK1
"If another mod is needed the current mod will let us know." TBK1
|
Originally Posted By Joefriday22:
How about some "old school" ABA SEAL gear just for fun: http://i117.photobucket.com/albums/o74/joefriday22/ABAgear1.jpg http://i117.photobucket.com/albums/o74/joefriday22/ABAgear2.jpg http://i117.photobucket.com/albums/o74/joefriday22/ABAgear3.jpg I live within 20 miles of at least 15 different military bases of all branches to include 3 SEAL teams so tactical/militaria is everywhere around here. LBT and Blackhawk are also within 10 miles of my house so I get tons of their stuff too. At one time I had almost a whole garage full of large boxes full of every type of LBT made gear you can think of and some special made stuff for certain military groups that you wouldn't think of. I've sold most of it now but still have more than I'll ever need/use left. wow a lot of that looked familiar from my time in Marine security forces in the mid 90's. At the CQB school in Chesapeake they had the ABA stuff I had one of those LBT mp5 hip pouches too |
have gun will travel
Well you seen much combat? ......... I've seen a little on TV.
We are jolly green giants, walking the Earth with guns.
Lifetime NRA member
Well you seen much combat? ......... I've seen a little on TV.
We are jolly green giants, walking the Earth with guns.
Lifetime NRA member
You may all go to hell, and I will go to Texas
Joined:
Mar 2007
Posts:
1685
EE: 100% (23)
TX, USA
|
Originally Posted By jinx667:
My PC. Eagle Assault PC. Special NSW run from SKD. http://img.photobucket.com/albums/v280/jinx667/DSC00768.jpg http://img.photobucket.com/albums/v280/jinx667/DSC00769.jpg http://img.photobucket.com/albums/v280/jinx667/DSC00783.jpg I love that, Very simple. I would like it even more if the mag pouches were part of the vest. 
Anyone have the ESSTAC LBB? I just ordered one from SKD and would like to see some pics of how yall have yours setup. |
"Regard your soldiers as your children, and they will follow you into the deepest valleys.
Look on them as your own beloved sons, and they will stand by you even unto death!"
Look on them as your own beloved sons, and they will stand by you even unto death!"
|
Originally Posted By Shawnmt6601:
a woodland FLC I put together for friends or hangers on that will turn up with no gear whatsoever, or light hiking http://i291.photobucket.com/albums/ll294/shawnmt6601/linhgasmask/012-2.jpg Spare gear is a good idea! A friend picked up a dozen of those $10 canvas sks/ak chest rigs at the gun show for the same purpose. |
"No man needs a reason to own a gun. He only needs the cash. " FrankSymptoms
You may all go to hell, and I will go to Texas
Joined:
Mar 2007
Posts:
1695
EE: 100% (23)
TX, USA
My MC LBB came in today, SKD got it to me 3 days. Pretty damn pleased with the service, cangt ask for anything more.
Bottom: 
Top: 
Here are a few pics od the GP pouch and the Admin Pouch. I ordered as well. 
Admin: 
|
"Regard your soldiers as your children, and they will follow you into the deepest valleys.
Look on them as your own beloved sons, and they will stand by you even unto death!"
Look on them as your own beloved sons, and they will stand by you even unto death!"
|
Originally Posted By dayphotog:
Originally Posted By Joefriday22:
How about some "old school" ABA SEAL gear just for fun: http://i117.photobucket.com/albums/o74/joefriday22/ABAgear1.jpg http://i117.photobucket.com/albums/o74/joefriday22/ABAgear2.jpg http://i117.photobucket.com/albums/o74/joefriday22/ABAgear3.jpg I live within 20 miles of at least 15 different military bases of all branches to include 3 SEAL teams so tactical/militaria is everywhere around here. LBT and Blackhawk are also within 10 miles of my house so I get tons of their stuff too. At one time I had almost a whole garage full of large boxes full of every type of LBT made gear you can think of and some special made stuff for certain military groups that you wouldn't think of. I've sold most of it now but still have more than I'll ever need/use left. wow a lot of that looked familiar from my time in Marine security forces in the mid 90's. At the CQB school in Chesapeake they had the ABA stuff I had one of those LBT mp5 hip pouches too Cool..and I live in Chesapeake too..Were you at "Northwest"? |
|
Originally Posted By Joefriday22:
Originally Posted By dayphotog:
Originally Posted By Joefriday22:
How about some "old school" ABA SEAL gear just for fun: http://i117.photobucket.com/albums/o74/joefriday22/ABAgear1.jpg http://i117.photobucket.com/albums/o74/joefriday22/ABAgear2.jpg http://i117.photobucket.com/albums/o74/joefriday22/ABAgear3.jpg I live within 20 miles of at least 15 different military bases of all branches to include 3 SEAL teams so tactical/militaria is everywhere around here. LBT and Blackhawk are also within 10 miles of my house so I get tons of their stuff too. At one time I had almost a whole garage full of large boxes full of every type of LBT made gear you can think of and some special made stuff for certain military groups that you wouldn't think of. I've sold most of it now but still have more than I'll ever need/use left. wow a lot of that looked familiar from my time in Marine security forces in the mid 90's. At the CQB school in Chesapeake they had the ABA stuff I had one of those LBT mp5 hip pouches too Cool..and I live in Chesapeake too..Were you at "Northwest"? I was stationed at "Northwest" 99-02 |
Hey Fuck Ass.... Get me a Beer!!
OBAMA = One Big Ass Mistake America
OBAMA = One Big Ass Mistake America
|
Originally Posted By Maguzi308:
repost with WC LOVE. Originally Posted By Maguzi308:
High Dollar So-Tech FLC. http://i192.photobucket.com/albums/z205/mfo88/DSC00043.jpg http://i192.photobucket.com/albums/z205/mfo88/DSC00045.jpg http://i192.photobucket.com/albums/z205/mfo88/DSC00046.jpg http://i192.photobucket.com/albums/z205/mfo88/DSC00044.jpg Who makes your GP pouchs in the first photo? |
|
Originally Posted By Maguzi308:
repost with WC LOVE. Originally Posted By Maguzi308:
High Dollar So-Tech FLC. http://i192.photobucket.com/albums/z205/mfo88/DSC00043.jpg http://i192.photobucket.com/albums/z205/mfo88/DSC00045.jpg http://i192.photobucket.com/albums/z205/mfo88/DSC00046.jpg http://i192.photobucket.com/albums/z205/mfo88/DSC00044.jpg And where did that back panel in the second pic come from? |
|
Originally Posted By Maguzi308:
http://i192.photobucket.com/albums/z205/mfo88/DSC00043-1.jpg Her is the request for info. sorry, but cant find the "eagle wc pc" on their website... link? thanks for responding, though!
|
|
Originally Posted By Maguzi308:
Sorry this is a old pc will not find on the eagle site. One of the their first pc, early 2000 time frame. you buy that locally or online somewhere or did you buy it new back when they were making them and have just had it all along? |
Post your gear porn here!!!!! Part two. (Page 5 of 166)
Armory Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter