Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
Armory Sponsor
12/20/2023 12:06:35 AM EDT
[Last Edit: Taft][Edited]
For those of you here who daily/weekly/monthly carry the 17.

Which sling, and where are you attaching it ?

How ? Are you attaching it ? (Rings, loops, HK hook, quick release button ?)

Front sling attachment or somewhere else ? Rear sling attachment or the stock ?  

Thanks !

There are only two rules in life set in concrete. 1. Survival of the fittest. 2. There will always be the “haves” and the “have nots”.
12/20/2023 12:37:14 AM EDT
[#1]
I had a Magpul MS1 on my 17S.  I had one end of the sling going through the rear slot on the stock, and the other end had a clip on the front of it that went through the sling loop on the front of the receiver.
12/20/2023 12:50:39 AM EDT
[#2]
Just use a pmm qd front adapter(rear if you prefer but I prefer stock or opposite stock mounted sling)) and either a vtac or vcas based on your preference

I prefer the vcas but there are definitely some merits to the vtac if you’re fast roping or cuffing perps.
12/20/2023 1:01:06 PM EDT
[#3]
Thanks for the replies !
There are only two rules in life set in concrete. 1. Survival of the fittest. 2. There will always be the “haves” and the “have nots”.
12/20/2023 1:14:07 PM EDT
[#4]
I’ve recently gone from QD mounts to HK hooks with paracord loops. Quiets noises, far simpler, lighter, cheaper, and compatible between my HK and FN rifles. The rest of my rifles use QDs or sling swivel mounts. Vickers are my go to slings.
12/21/2023 4:02:16 PM EDT
[#5]
Quote History
Originally Posted By Zeebz:
I had a Magpul MS1 on my 17S.  I had one end of the sling going through the rear slot on the stock, and the other end had a clip on the front of it that went through the sling loop on the front of the receiver.
View Quote


Same
12/21/2023 5:44:43 PM EDT
[Last Edit: FluxIntegral][Edited] [#6]
Magpul, Viking tactics, or Blue Force Gear sling (take your pick). HK sling clip to the rear receiver loop (w/Ferro Concept cover), and Magpul para clip with a Magpul loop (either M-Lok, or Pic rail) up front. Tried the PMM QD adaptors. They work well, just couldn't get comfortable with that tiny screw clamping them onto the rifle, especially the front one. The back one is fine, but that front one has a screw that looks more at home inside a PC, or a remote control car, than attaching hardware to a fighting rifle.
12/21/2023 11:22:06 PM EDT
[Last Edit: CPshooter1][Edited] [#7]
I'm using a BFG Vickers sling (same as pictured below) and running it 2-point at the back of the stock with a LGA sling adapter loop.

HK snap hook at the front because I don't trust QD sockets and then the rear sling hardware is replaced by the ITW QR buckle that comes with the LGA sling adapter loop.  VERY stable and comfortable 2-point sling setup.  I prefer using the rear of the stock as the attachment point vs. the rear of the receiver.





ETA: I've got a few of the LGA sling adapters (I run them on my AR stocks as well), and the latest one I received was the updated version that includes an elastic keeper sleeve that slips over the G-hook, and it has a better/cleaner stitching design as well.  Really nice product!
12/22/2023 12:35:43 PM EDT
[#8]
Quote History
Originally Posted By CPshooter1:
I'm using a BFG Vickers sling (same as pictured below) and running it 2-point at the back of the stock with a LGA sling adapter loop.

HK snap hook at the front because I don't trust QD sockets and then the rear sling hardware is replaced by the ITW QR buckle that comes with the LGA sling adapter loop.  VERY stable and comfortable 2-point sling setup.  I prefer using the rear of the stock as the attachment point vs. the rear of the receiver.

https://lga-systems.com/cdn/shop/products/[email protected]?v=1648239206

https://lga-systems.com/cdn/shop/products/[email protected]?v=1648239206

ETA: I've got a few of the LGA sling adapters (I run them on my AR stocks as well), and the latest one I received was the updated version that includes an elastic keeper sleeve that slips over the G-hook, and it has a better/cleaner stitching design as well.  Really nice product!
View Quote


I like it !
There are only two rules in life set in concrete. 1. Survival of the fittest. 2. There will always be the “haves” and the “have nots”.
12/22/2023 7:04:08 PM EDT
[Last Edit: EdgecrusherXES][Edited] [#9]
I added QD sockets in my stock on both sides and on the receiver along with an extended rail with QD sockets.  I use a Magpul MS4 sling or Blue Force padded with QD swivels.  Worked great slung hiking to my hunting spot I usually sling over my back.
Attached File
Because some men aren't looking for anything logical, like money. They can't be bought, bullied, reasoned, or negotiated with. Some men just want to watch the world burn.
12/23/2023 12:19:33 AM EDT
[#10]
PMM Front and rear QD’s with a Ferro concepts or BFG vickers sling.  Best way I have found.  

12/23/2023 3:07:31 PM EDT
[#11]
Hk hook up front and VTAC sling.  Not fancy, but works ok.  I long ago standardized on VTACs for all the things and don't feel like changing it now.  Rattles a bit up front but I don't care too much.  Could probably tape it up for quiet.

I tried a single point a decade ago just as a range sling and it was...uninspiring.
12/26/2023 2:29:53 PM EDT
[#12]
Quote History
Originally Posted By Sirveaux:
Hk hook up front and VTAC sling.  Not fancy, but works ok.  I long ago standardized on VTACs for all the things and don't feel like changing it now.  Rattles a bit up front but I don't care too much.  Could probably tape it up for quiet.

I tried a single point a decade ago just as a range sling and it was...uninspiring.
View Quote


I have tried the single, two-point, and three-point slings. I do not like single point and the three-point just gets in the way.

Two-point adjustable is the way to go.
There are only two rules in life set in concrete. 1. Survival of the fittest. 2. There will always be the “haves” and the “have nots”.

Sign up to continue the discussion

Create a free account to share your thoughts, follow topics, and connect with the AR15.COM community.

Already a member? Sign In

Armory Sponsor