Posted: 2/17/2015 6:34:52 PM EDT
|
Hello All,
Long story Short I used to live in NY and had limited access to 3-gun, I've done several carbine courses and had started training for IPSC but my primary focus was escaping NY. Moved to Arizona to start a company and now that it's finally off the ground I can focus on gearing up and training for 3-gun and IDPA. I don't mind spending money on good gear, however I hate the feeling when I buy a nice piece of gear only to realize it doesn't have the adjustments I need or fit me correctly. I have been accustomed to using a standard 8 shotshell holder and performing a weak hand reload but was never really comfortable with the technique. I wanted to try out a 2 round reload with a similar rig to this: 
I decided to 3D print a setup and run drills to get a feel for the technique and if it was right for me. I'm not sure this rig would stand up to more than 1 event (I've inserted and removed the shotshells 40 times without failure so far) but it will at least give you the feel for this style setup before spending the money. I also wanted to see what kind of spacing I would need to comfortably draw the rounds out of the holder. There are 2 printed parts in this assembly, each shotshell holder is printed as a single piece (MUST be printed vertically as it increases strength of the clips), the base plate can accommodate up to 4 shotshell holders and has a .75" pattern for mounting both the holders and belt clips. I put the files up on GrabCAD: HERE This is my first attempt: 
Any recommendations on how many shells I should plan on carrying, different belt attachment systems I should look into, or just general tips please let me know. |
|
I need to clarify my previous statement
By problem, it could be as simple as losing some shells to bending/breaking something. Many guys also put a quick disconnect buckle so they can drop it quick if the stage design allows. I may print a few for a couple buddies to try out. I shoot open , cause I suck at reloading 
|
[url=http://imgur.com/PvptrgB] http://i.imgur.com/PvptrgBm.png?1 [/url]
|
That's very cool!
I've moved back and forth with the caddies, it's great you can try different styles and see what works on your own. When it comes to prone, yes, it can be an issue. With most of my matches I tend to remove the caddy(s) via the quick release prior to running that stage or reposition them on the belt so they're as out of the way as they can be. |
Joined:
Oct 2022
Posts:
25
EE: 0% (0)
AZ, USA