Equipment Exchange

Over the years, we have converted thousands of cans! We certainly haven’t stopped yet, and we don't intend to. We do batches of mount conversions every 6 weeks. Best of all, we don't have wait lists for any of our services so you can send in right away!

Our service information will be explained in detail below, but all the same information and our work order can also be found on the following webpage where you can also place a $20 service deposit so we know to expect your suppressor; https://www.eccomachine.net/product/bravo-conversion-service/

Deposits are fully refundable for 5 days, 75% refundable for 30 days, non-refundable after 30 days. Deposits do not ever expire and will be applied to your final invoice total at time of completion.

We do a batch of conversions approximately every six weeks; lead time is dependent on the date of our next batch relative to the date we receive your suppressor.


Pricing is as follows (shipping notwithstanding):

1.375-24 Bravo (HUB) conversion on most steel or stainless steel bodied suppressors $190.00, complete refinish included

1.375-24 Bravo (HUB) conversion on most Titanium suppressors $195.00, complete refinish included

1.375-24 Bravo (HUB) conversion on suppressors which can be bored & threaded without the need for a conversion piece: $75, complete refinish included (this is only possible with a handful of suppressors, most notable the old 1.625" diameter YHM Phantom 7.62)

IMPORTANT NOTE: The conversion allows the suppressor to accept any Omega/Bravo pattern mount, but *DOES NOT* include one.


We sell a wide variety of different mounts and adapters that we manufacture in house for you to choose from if you would like to purchase at time of service or from our online store at any time.

*We do not stock or sell any other manufacturer’s parts. * We HIGHLY recommend that you send in or drop ship any mounts from another manufacturer so we can guarantee fitment.


Popular Suppressors for Conversion
Below is an alphabetical list of suppressors commonly sent in for this service. This list does not include every suppressor we have ever converted, just frequent flyers. There are many others that can be done. If you want to have a mount conversion done and do not see your suppressor make and/or model listed below, please reach out to us directly to discuss.

AAC M4-1000
AAC M4-2000
AAC Mini 4
AAC 7.62 SDN-6
AAC 7.62 SD
AAC 5.56 SD
AAC SR5
AAC SR7
AAC SPR/M4
AAC Cyclone
AAC Ranger
AAC 300 TM
AAC Mk 13 SD
AAC TiTAN QD

Dead Air Sandman
Dead Air Sandman Ti

Gemtech TREK
Gemtech M4-96D
Gemtech Halo
Gemtech HVT
Gemtech Quicksand
Gemtech Sandstorm

Griffin M4SD
Griffin 30 SD
Griffin RECCE

Rugged Radiant
Rugged Razor
Rugged Surge
Rugged Micro 30

Sig SRD 7.62
Sig SRD 7.62QD
Sig SRD 5.56
Sig SRD 5.56 QD

Surefire RC2

SWR/SilencerCo Specwar
SWR/SilencerCo Saker

TAC ORD TAC-16

YHM Turbo
YHM Resonator
YHM Phantom 7.62
YHM Phantom 7.62 Ti
YHM Phantom 5.56
YHM Phantom LT


Moly Resin Color Selection (refinish of entire suppressor is included in conversion pricing)

   SOCOM Black
   Grey-Black Colt Flat
   Flat Grey
   Coyote Brown
   Tan FDE
   OD Green
   Foliage Green
   Burnt Bronze
   Flat Brown

Add Ons and Additional Options

Purchase of ECCO Machine 1.375-24 Bravo Mount/Adapters

   ECCO Machine Gyrex taper mount and suppressor adapters
   ECCO Machine Direct Thread Adapters in a vast array of different female thread patterns
   Cherry Bomb/Rearden muzzle device compatible adapters
   Griffin pattern .7” long or 1.0? XL adapters
   Rugged taper mount adapters
   SAS T.O.M.B. mount adapters
   Thunderbeast CB adapters
   Surefire Trainer/Warden conversion service available

Moly Resin Refinish Mount/Adapter (there are some multi-piece mounts that we do not refinish due to inability to disassemble & reassemble without parts replacement or risking damage)

   ECCO Machine mounts/adapters; no charge for refinishing same color as suppressor
   Other one-piece mounts/adapters; no charge for refinishing same color as suppressor
   Multi-piece adapters (ex: Dead Air Keymo); +$25.00


Rocksett Mount/Adapter in suppressor; no charge

End cap repairs or replacements (price varies, often no charge if it can simply be formed back to shape and cleaned up, usually $40-$65 for weld repairs or replacement)

Dead Air front end cap conversion (Not available on all models); $75.00

   We do not stock or sell Dead Air front caps, so if you elect and we are able to perform that conversion on your suppressor, you will need to source your own caps.

   If you desire the cap to be finished to match the suppressor, it needs to be included. There is no additional charge for refinishing the cap at the time of conversion with refinish.



A quick note on frequent questions we are asked about things we cannot do or have limitations on;

1. It is illegal to change the caliber of a suppressor

2. Shortening of suppressors can be done to a degree; ATF has never specified a maximum amount, only say "minimal shortening for repair purposes".  We are not comfortable shortening more than 1" unless there is a demonstrable reason we need to do more.