User Panel
User Panel
User Panel
|
Posted: 5/28/2019 5:04:56 PM EDT
[#1]
Quote HistoryQuoted: Shot the course or fire 3 separate times. Been a while sense I have shot. Kept getting 1 flyer. Here is the backer. Each group has 15 holes.https://www.AR15.Com/media/mediaFiles/351263/image_jpg-961218.JPG  Attached FileSecond attempt still a little wide  Attached File |
|
|
|
Posted: 5/31/2019 9:29:36 PM EDT
[#3]
Range
 Untitled by Adam C, on Flickr" />
Target 1  Untitled by Adam C, on Flickr" />
Target 2  Untitled by Adam C, on Flickr" />
Target 3  Untitled by Adam C, on Flickr" />
Target 1 with calipers  Untitled by Adam C, on Flickr" />
Target 2 with calipers  Untitled by Adam C, on Flickr" />
Target 3 with calipers  Untitled by Adam C, on Flickr" />
Gun  Untitled by Adam C, on Flickr" />
Gun: Ruger Mark 1 2 hand hold Division: Stock rimfire Ammo: CCI standard velocity Avg group size: 3.85" |
|
|
|
Posted: 5/31/2019 10:36:48 PM EDT
[#4]
Couldn't get on a 25 yard range this week (the range with 25 yard lanes was flooded out) so I only got to shoot at 15 yards. The center target is 26 shots from my HK P2000 at 15 yards. The smaller targets are 13 shots each at 7 yards with the same gun.
 Attached FileThe cross on the center target is 12" wide and 14" high. I estimate the group at 9.5" The smaller targets are 3.75" wide by 4.25" high. Worst group is about 5.5", best is about 3.5" Obviously I realize that this is not a competition entry, just showing how bad I shoot. 
|
|
|
|
Posted: 6/1/2019 7:55:40 PM EDT
[#5]
Shot this today at range with @GilenusX207. Gen 3 G19 with RMR and 150 gr Fed Syntech Ammo. Only mods to gun are a "." connector out of a gen4 and a Gen 17 trigger bar. Shoot the 3 groups in ~ about 2 minutes total. Flyer (my fault) in #2 is a downer but oh well.
ETA. This was a fun exercise. I want to try again sometime and see if I can do better Open - Fooboy - Glock 19 Gen 3 with 3.25 MOA RMR - 9mm - Standing, unsupported with two hands - 3.875 in - 6.0 in - 5.1875 in 
|
|
|
|
Posted: 6/1/2019 8:19:05 PM EDT
[#6]
Quote HistoryQuoted:
Shot this today at range with @GilenusX207. Gen 3 G19 with RMR and 150 gr Fed Syntech Ammo. Only mods to gun are a "." connector out of a gen4 and a Gen 17 trigger bar. Shoot the 3 groups in ~ about 2 minutes total. Flyer (my fault) in #2 is a downer but oh well.
Open - Fooboy - Glock 19 Gen 3 with 3.25 MOA RMR - 9mm - Standing, unsupported with two hands - 3.875 in - 6.0 in - 5.1875 in http://i64.tinypic.com/2572l2s.jpg http://i67.tinypic.com/qovdeg.jpg http://i67.tinypic.com/1pijqr.jpg http://i66.tinypic.com/j9y8ig.jpg http://i63.tinypic.com/2nllz4.jpg http://i66.tinypic.com/126fbxu.jpg http://i64.tinypic.com/5ls08p.jpg http://i65.tinypic.com/b4yt84.jpg http://i64.tinypic.com/5q2h.jpg |
|
|
|
Posted: 6/1/2019 8:40:01 PM EDT
[#7]
Weird. Showing up for me?
|
|
|
|
Posted: 6/1/2019 8:42:08 PM EDT
[#8]
Quote HistoryQuoted:
Weird. Showing up for me? @MSC182 @MuhammadAli @nickforney @Nostromo |
|
|
|
Posted: 6/2/2019 12:19:41 AM EDT
[#9]
Quote HistoryQuoted:
I can see it too. @MSC182 @MuhammadAli @nickforney @Nostromo Quote HistoryQuoted:
Quoted:
Weird. Showing up for me? @MSC182 @MuhammadAli @nickforney @Nostromo |
|
|
|
Posted: 6/3/2019 11:32:55 AM EDT
[#10]
Made an attempt yesterday, but shot a very nice group nearly a foot low. Intend to go out again and rezero my red dots once my new glasses arrive (hopefully today).
|
|
|
|
Posted: 6/3/2019 9:54:56 PM EDT
[#11]
Range
 Untitled by Adam C, on Flickr" />
Target 1  Untitled by Adam C, on Flickr" />
Target 2  Untitled by Adam C, on Flickr" />
Target 3  Untitled by Adam C, on Flickr" />
Target 1 measured  Untitled by Adam C, on Flickr" />
Target 2 measured  Untitled by Adam C, on Flickr" />
Target 3 measured  Untitled by Adam C, on Flickr" />
Gun  Untitled by Adam C, on Flickr" />
Gun: M&P 2.0 9c with trijicon HD XR sights Division: Stock centerfire 2 hand hold Avg group size: 5.88" Ammo: 115 gr Rainier HP 5.5 gr silhouette |
|
|
|
Posted: 6/7/2019 9:24:31 PM EDT
[#12]
The Range
 Attached FileWalther P99 Two handed hold 9MM 125 LRN reloads  Attached File Attached File Attached File |
|
|
|
Posted: 6/7/2019 9:31:53 PM EDT
[#13]
|
|
|
|
Posted: 6/14/2019 8:17:32 PM EDT
[#14]
Range
 Untitled by Adam C, on Flickr" />
Target 1  Untitled by Adam C, on Flickr" />
Target 2  Untitled by Adam C, on Flickr" />
Target 3  Untitled by Adam C, on Flickr" />
Target 1 measured  Untitled by Adam C, on Flickr" />
Target 2 measured  Untitled by Adam C, on Flickr" />
Target 3 measured  Untitled by Adam C, on Flickr" />
Gun  Untitled by Adam C, on Flickr" />
Gun: Sig P226 Stainless 9mm 2 hand hold Ammo: 115 gr Rainier HP 5.5 gr Silhouette Avg. group size: 4.37" |
|
|
|
Posted: 6/16/2019 8:03:02 AM EDT
[#15]
Good shooting, boys (and girls?). Let's keep this alive...
|
|
|
|
Posted: 6/17/2019 8:19:43 PM EDT
[#16]
 Attached FileProof I haven't forgotten. Put in a little practice. 50 foot reduced target shot indoors at an unmeasured 25 yards  Attached FileMight be two weeks, but I will get out and post a target. |
|
|
|
Posted: 6/21/2019 8:05:06 PM EDT
[#17]
Range
Untitled by Adam C, on Flickr" />
Target 1  Untitled by Adam C, on Flickr" />
Target 2  Untitled by Adam C, on Flickr" />
Target 3  Untitled by Adam C, on Flickr" />
Target 1 measured  Untitled by Adam C, on Flickr" />
Target 2 measured  Untitled by Adam C, on Flickr" />
Target 3 measured  Untitled by Adam C, on Flickr" />
Gun  Untitled by Adam C, on Flickr" />
Gun: Sig P365 Two hand hold Ammo 115 gr xtreme plated, 5.5 gr silhouette Avg group size- 7.35" |
|
|
|
Posted: 6/22/2019 1:38:55 PM EDT
[#18]
LuckyDucky
A question: In the 2014 Challenge, my Les Baer Premier II had to be classified as a "Limited." In the 2016 Challenge, my LB PII was classified as "Stock." What should it be classified for the 2019 Challenge? -ppknut |
|
|
|
Posted: 6/22/2019 2:57:45 PM EDT
[#19]
My 1st entry for 2019.
Range: 
First target got 6 shots because...Revolver. Doh! 
 
I used my Smith & Wesson Model 38 Combat Masterpiece for this Challenge. Ammo is hand loaded using 4.0 grs. of Win 231 and a 158 gr. Berry's Plated SWC. All shots fired single action. Division: Stock Centerfire User Name: ppknut Handgun Make/Model: S&W Model 15 Caliber: 38 Spl. Two Handed Group #1: 4.57 in. Group #2: 5.10 in. Group #3: 5.84 in. ETA: Forgot to enter Group Size on Target...Will edit and repost if needed. |
|
|
|
Posted: 6/23/2019 10:46:34 AM EDT
[#20]
Quote HistoryQuoted:
LuckyDucky A question: In the 2014 Challenge, my Les Baer Premier II had to be classified as a "Limited." In the 2016 Challenge, my LB PII was classified as "Stock." What should it be classified for the 2019 Challenge? -ppknut @ppknut @NukeFromOrbit @pavlovwolf @PiccoloPlayer |
|
|
|
Posted: 6/23/2019 10:52:23 AM EDT
[#21]
Results updated. If you've edited a prior post and I missed it, be sure to post and let me know!
We are up to 19 distinct shooters. Get those entries in! @pointman12 @polymorpheous @ponger @popnfresh |
|
|
|
Posted: 6/23/2019 2:14:28 PM EDT
[#22]
Quote HistoryQuoted: Let's do open. @ppknut @NukeFromOrbit @pavlovwolf @PiccoloPlayer |
|
|
|
Posted: 6/23/2019 2:22:27 PM EDT
[#23]
Quote HistoryQuoted: I haven't shot a group worthy of posting yet. Completely new gun, trigger system. I have mostly cured my pulling to the left, but at 25 yards, the two targets I have shot the best one only had four rounds on the paper. I'm working to get better but until I get all 5 on the paper there's no use in posting it. I did realize several things I was doing and have been working on them closer up and getting better. The 1911s I shot for the last two decades really covered up a lot of sins. |
|
|
|
Posted: 6/23/2019 2:49:50 PM EDT
[#24]
My 2nd entry for 2019.
Range: 
3 Shot Targets:   
3 Targets w/Ruler:    I used my Les Baer Premier II for this Challenge. Ammo is hand loaded using 5.2 grs. of Win 231 and 230 gr. Extreme Plated RN: 
Division: Open Centerfire User Name: ppknut Handgun Make/Model: Les Baer Premier II Caliber: 45 acp. Two Handed Group #1: 6.50 in. Group #2: 6.03 in. Group #3: 3.44 in. |
|
|
|
Posted: 6/24/2019 1:38:57 PM EDT
[#25]
I finally got a dry day when I didn't have to be at work yesterday. Off to embarrass myself at the range.
Here's my target setup. A couple of plant stakes and part of an old box: 
 I brought two handguns out with me. Ruger Mark I .22 LR: 
This is a Mark I pistol made in 1982. It originally belonged to my (ex) FIL, He left it to me for whatever reason. I've cleaned up most of the serious rust, and plan to make a refinishing project of it sometime Real Soon Now. It's bone stock with the exception of Pachmayr grips that were on it when I got it. I shot these strings two handed. Ammo used was Federal 38 grain copper plated hollow points. Just what I had handy. 
Results: Stock rimfire - Sprocket99- Ruger Mark I - .22 LR - two hands - group 1 (2.00") - group 2 (2.15") - group 3 (2.57") The second gun is a Smith and Wesson Model 28 Highway Patrolman .357. I was shooting Winchester white box 130 grain .38 special ammo. Again, what I had laying around. 
This is a revolver I just got a month or so ago. Serial number puts it as 1979 manufacture. It had truly horrendous laminate grips when I picked it up. I've changed those for the equally ugly, but more functional rubber Houges. Otherwise, it's completely stock. I was shooting two handed, double action. 
Results: Stock center fire - Sprocket99- Smith & Wesson Model 28 - .357 magnum [shooting .38 special] - two hands - group 1 (3.44") - group 2 (2.83") - group 3 (3.33") edit for spelling... |
|
|
|
Posted: 6/24/2019 4:08:06 PM EDT
[#26]
Quote HistoryQuoted:
I finally got a dry day when I didn't have to be at work yesterday. Off to embarrass myself at the range.
Here's my target setup. A couple of plant stakes and part of an old box: https://www.ar15.com/media/mediaFiles/472753/range_1-991294.jpg https://www.ar15.com/media/mediaFiles/472753/range_2_JPG-991295.jpg https://www.ar15.com/media/mediaFiles/472753/range_3_JPG-991296.jpg I brought two handguns out with me. Ruger Mark I .22 LR: https://www.ar15.com/media/mediaFiles/472753/1_JPG-991298.jpg https://www.ar15.com/media/mediaFiles/472753/2_JPG-991299.jpg https://www.ar15.com/media/mediaFiles/472753/3_JPG-991300.jpg https://www.ar15.com/media/mediaFiles/472753/1m_JPG-991301.jpg https://www.ar15.com/media/mediaFiles/472753/2m_JPG-991302.jpg https://www.ar15.com/media/mediaFiles/472753/3m_JPG-991303.jpg This is a Mark I pistol made in 1982. It originally belonged to my (ex) FIL, He left it to me for whatever reason. I've cleaned up most of the serious rust, and plan to make a refinishing project of it sometime Real Soon Now. It's bone stock with the exception of Pachmayr grips that were on it when I got it. I shot these strings two handed. Ammo used was Federal 38 grain copper plated hollow points. Just what I had handy. https://www.ar15.com/media/mediaFiles/472753/mark_1-991305.jpg Results: Stock rimfire - Sprocket99- Ruger Mark I - .22 LR - two hands - group 1 (2.00") - group 2 (2.15") - group 3 (2.57") The second gun is a Smith and Wesson Model 28 Highway Patrolman .357. I was shooting Winchester white box 130 grain .38 special ammo. Again, what I had laying around. https://www.ar15.com/media/mediaFiles/472753/1_JPG-991309.jpg https://www.ar15.com/media/mediaFiles/472753/2_JPG-991311.jpg https://www.ar15.com/media/mediaFiles/472753/3_JPG-991313.jpg https://www.ar15.com/media/mediaFiles/472753/1m_JPG-991310.jpg https://www.ar15.com/media/mediaFiles/472753/2m_JPG-991312.jpg https://www.ar15.com/media/mediaFiles/472753/3m_JPG-991314.jpg This is a revolver I just got a month or so ago. Serial number puts it as 1979 manufacture. It had truly horrendous laminate grips when I picked it up. I've changed those for the equally ugly, but more functional rubber Houges. Otherwise, it's completely stock. I was shooting two handed, double action. https://www.ar15.com/media/mediaFiles/472753/model_28_JPG-991315.jpg Results: Stock center fire - Sprocket99- Smith & Wesson Model 28 - .357 magnum [shooting .38 special] - two hands - group 1 (3.44") - group 2 (2.83") - group 3 (3.33") edit for spelling... |
|
|
|
Posted: 6/24/2019 4:40:33 PM EDT
[#27]
Tagged. Looks fun.
|
|
|
|
Posted: 6/25/2019 7:31:29 AM EDT
[#28]
Quote HistoryQuoted:
That's some damn good shooting, sir. |
|
|
|
Posted: 6/26/2019 12:58:39 AM EDT
[#29]
Centerfire Open - Everythingisawesome - Glock 19 - 9mm - two hand - 4.158" - 3.288" - 5.500"
Stock Gen3 G19 w/TLR-1S, Federal bulk pack 115gr 9mm Disregard the wrong division written on target. Didn't realize the WML put me into open. I'll be shooting this a few more times. |
|
|
|
Posted: 6/26/2019 2:00:54 AM EDT
[#30]
Sub'd. I'll see if my local indoor range goes to 25yds. on thursday. They don't allow pictures on the range, but i'll try to sneak one in for the distance.
|
|
|
|
Posted: 6/26/2019 8:20:22 AM EDT
[#31]
Quote HistoryQuoted:
Thanks for the compliment, brother. The Ruger has digested 100+ rounds a week for the last few decades. The Smith? Great sights, longer sight radius than what I usually shoot, excellent trigger pull, and pure dumb luck. DA on that revolver is significantly better than shooting my EDC Glock 19, without the snappy recoil. I've shot about 600 rounds with it since it followed me home from the store. 
|
|
|
|
Posted: 6/26/2019 11:21:53 AM EDT
[#32]
Quote HistoryQuoted:
Centerfire Open - Everythingisawesome - Glock 19 - 9mm - two hand - 4.158" - 3.288" - 5.500" https://i.imgur.com/w5bxJTrl.jpg https://i.imgur.com/9OD46gxl.jpg https://i.imgur.com/8dErdBWl.jpg https://i.imgur.com/fwsZqHzl.jpg https://i.imgur.com/3GBOxWLl.jpg https://i.imgur.com/Oh5wzual.jpg https://i.imgur.com/IRTWc4Wl.jpg https://i.imgur.com/Xruc0Xzl.jpg Stock Gen3 G19 w/TLR-1S, Federal bulk pack 115gr 9mm Disregard the wrong division written on target. Didn't realize the WML put me into open. I'll be shooting this a few more times. |
|
|
|
Posted: 6/26/2019 11:23:02 AM EDT
[#33]
Quote HistoryQuoted:
I finally got a dry day when I didn't have to be at work yesterday. Off to embarrass myself at the range.
Here's my target setup. A couple of plant stakes and part of an old box: https://www.ar15.com/media/mediaFiles/472753/range_1-991294.jpg https://www.ar15.com/media/mediaFiles/472753/range_2_JPG-991295.jpg https://www.ar15.com/media/mediaFiles/472753/range_3_JPG-991296.jpg I brought two handguns out with me. Ruger Mark I .22 LR: https://www.ar15.com/media/mediaFiles/472753/1_JPG-991298.jpg https://www.ar15.com/media/mediaFiles/472753/2_JPG-991299.jpg https://www.ar15.com/media/mediaFiles/472753/3_JPG-991300.jpg https://www.ar15.com/media/mediaFiles/472753/1m_JPG-991301.jpg https://www.ar15.com/media/mediaFiles/472753/2m_JPG-991302.jpg https://www.ar15.com/media/mediaFiles/472753/3m_JPG-991303.jpg This is a Mark I pistol made in 1982. It originally belonged to my (ex) FIL, He left it to me for whatever reason. I've cleaned up most of the serious rust, and plan to make a refinishing project of it sometime Real Soon Now. It's bone stock with the exception of Pachmayr grips that were on it when I got it. I shot these strings two handed. Ammo used was Federal 38 grain copper plated hollow points. Just what I had handy. https://www.ar15.com/media/mediaFiles/472753/mark_1-991305.jpg Results: Stock rimfire - Sprocket99- Ruger Mark I - .22 LR - two hands - group 1 (2.00") - group 2 (2.15") - group 3 (2.57") The second gun is a Smith and Wesson Model 28 Highway Patrolman .357. I was shooting Winchester white box 130 grain .38 special ammo. Again, what I had laying around. https://www.ar15.com/media/mediaFiles/472753/1_JPG-991309.jpg https://www.ar15.com/media/mediaFiles/472753/2_JPG-991311.jpg https://www.ar15.com/media/mediaFiles/472753/3_JPG-991313.jpg https://www.ar15.com/media/mediaFiles/472753/1m_JPG-991310.jpg https://www.ar15.com/media/mediaFiles/472753/2m_JPG-991312.jpg https://www.ar15.com/media/mediaFiles/472753/3m_JPG-991314.jpg This is a revolver I just got a month or so ago. Serial number puts it as 1979 manufacture. It had truly horrendous laminate grips when I picked it up. I've changed those for the equally ugly, but more functional rubber Houges. Otherwise, it's completely stock. I was shooting two handed, double action. https://www.ar15.com/media/mediaFiles/472753/model_28_JPG-991315.jpg Results: Stock center fire - Sprocket99- Smith & Wesson Model 28 - .357 magnum [shooting .38 special] - two hands - group 1 (3.44") - group 2 (2.83") - group 3 (3.33") edit for spelling...
Nice shooting! |
|
|
|
Posted: 6/28/2019 10:59:39 AM EDT
[#34]
Quote HistoryQuoted:
Results updated. If you've edited a prior post and I missed it, be sure to post and let me know! We are up to 19 distinct shooters. Get those entries in! @pointman12 @polymorpheous @ponger @popnfresh 
It's been a crazy year for me. I hope to get out and try my new G19 w/ RMR set up one of these days. Thanks @LuckyDucky for these challenge threads! |
|
|
|
Posted: 6/29/2019 4:55:46 AM EDT
[#35]
Quote HistoryQuoted:
I finally got a dry day when I didn't have to be at work yesterday. Off to embarrass myself at the range.
Here's my target setup. A couple of plant stakes and part of an old box: https://www.ar15.com/media/mediaFiles/472753/range_1-991294.jpg https://www.ar15.com/media/mediaFiles/472753/range_2_JPG-991295.jpg https://www.ar15.com/media/mediaFiles/472753/range_3_JPG-991296.jpg I brought two handguns out with me. Ruger Mark I .22 LR: https://www.ar15.com/media/mediaFiles/472753/1_JPG-991298.jpg https://www.ar15.com/media/mediaFiles/472753/2_JPG-991299.jpg https://www.ar15.com/media/mediaFiles/472753/3_JPG-991300.jpg https://www.ar15.com/media/mediaFiles/472753/1m_JPG-991301.jpg https://www.ar15.com/media/mediaFiles/472753/2m_JPG-991302.jpg https://www.ar15.com/media/mediaFiles/472753/3m_JPG-991303.jpg This is a Mark I pistol made in 1982. It originally belonged to my (ex) FIL, He left it to me for whatever reason. I've cleaned up most of the serious rust, and plan to make a refinishing project of it sometime Real Soon Now. It's bone stock with the exception of Pachmayr grips that were on it when I got it. I shot these strings two handed. Ammo used was Federal 38 grain copper plated hollow points. Just what I had handy. https://www.ar15.com/media/mediaFiles/472753/mark_1-991305.jpg Results: Stock rimfire - Sprocket99- Ruger Mark I - .22 LR - two hands - group 1 (2.00") - group 2 (2.15") - group 3 (2.57") The second gun is a Smith and Wesson Model 28 Highway Patrolman .357. I was shooting Winchester white box 130 grain .38 special ammo. Again, what I had laying around. https://www.ar15.com/media/mediaFiles/472753/1_JPG-991309.jpg https://www.ar15.com/media/mediaFiles/472753/2_JPG-991311.jpg https://www.ar15.com/media/mediaFiles/472753/3_JPG-991313.jpg https://www.ar15.com/media/mediaFiles/472753/1m_JPG-991310.jpg https://www.ar15.com/media/mediaFiles/472753/2m_JPG-991312.jpg https://www.ar15.com/media/mediaFiles/472753/3m_JPG-991314.jpg This is a revolver I just got a month or so ago. Serial number puts it as 1979 manufacture. It had truly horrendous laminate grips when I picked it up. I've changed those for the equally ugly, but more functional rubber Houges. Otherwise, it's completely stock. I was shooting two handed, double action. https://www.ar15.com/media/mediaFiles/472753/model_28_JPG-991315.jpg Results: Stock center fire - Sprocket99- Smith & Wesson Model 28 - .357 magnum [shooting .38 special] - two hands - group 1 (3.44") - group 2 (2.83") - group 3 (3.33") edit for spelling...
|
|
|
|
Posted: 7/16/2019 12:44:14 AM EDT
[#36]
Post more entries!
|
|
|
|
Posted: 7/23/2019 5:07:26 PM EDT
[#37]
 Attached FileFor some reason this pic didnt upload to the Ipad so I took a picture of the picture on my phone.  Attached FileAnother pic of the range.  Attached File Attached File Attached File |
|
|
|
Posted: 7/23/2019 5:08:50 PM EDT
[#38]
 Attached File Attached File Attached File Attached FilePolymer 80 9mm with red dot. (G17) all factory Glock innards, except a Double Diamond 3.5lb connector. Took trigger pull from 6.5lb to 5 lb. Shooting two hands. First two groups Wolf steel case, third one is ZQI. Though I have owned handguns for over 20 years, I never really got serious about learning to shoot them well until I built this gun a couple months ago. I hope to post some better groups later this year. I also have an AMT Automag2 i plan to use for stock rimfire. Average group 6.08" |
|
|
|
Posted: 8/11/2019 6:16:00 PM EDT
[#39]
@LuckyDucky
Are you still updating scores, or am I just too stoopit to find the update? |
|
|
|
Posted: 8/11/2019 6:49:51 PM EDT
[#40]
Quote HistoryQuoted:
@LuckyDucky Are you still updating scores, or am I just too stoopit to find the update? I count 4 entries since then that have not been updated on the 1st page of the thread. He may have gotten busy with more pressing stuff. |
|
|
|
Posted: 8/12/2019 1:30:24 PM EDT
[#41]
I gave this a try at 25 yards with a S&W Model 67. Not going to even post up pictures because it was that bad. I need some more practice on the revolver before trying accuracy at 25 yards.
|
|
|
|
Posted: 8/12/2019 3:01:04 PM EDT
[#42]
Quote HistoryQuoted:
I gave this a try at 25 yards with a S&W Model 67. Not going to even post up pictures because it was that bad. I need some more practice on the revolver before trying accuracy at 25 yards. At least tell us what your groups were. |
|
|
|
Posted: 8/13/2019 9:14:36 PM EDT
[#43]
Quote HistoryQuoted: Posting them still enters you in the contest. Might also get some more people to try the challenge knowing not everyone here shoots one hole groups at 100 yards, open sights, high wind... At least tell us what your groups were. Results now updated through 8/13/19. @Retro @RJeff21 @Rumrunner358 |
|
|
|
Posted: 8/30/2019 6:45:19 PM EDT
[#44]
Bump to encourage more entries.
|
|
|
|
Posted: 8/30/2019 7:48:24 PM EDT
[#45]
Ok what is an acceptable target to use, I'm not interested in burning up a $35 ink cartridge.
|
|
|
|
Posted: 8/30/2019 11:10:36 PM EDT
[#46]
Quote HistoryQuoted:
Ok what is an acceptable target to use, I'm not interested in burning up a $35 ink cartridge. |
|
|
|
Posted: 8/30/2019 11:17:13 PM EDT
[#47]
I've never stretched my pistol skills to 25yrds. Kinda interested.
havent read the whole thread OP. Is there a ruling on weapons lights? Or do I have to take mine off to be "stock" |
|
|
|
Posted: 8/31/2019 12:10:33 AM EDT
[#48]
Quote HistoryQuoted:
I've never stretched my pistol skills to 25yrds. Kinda interested. havent read the whole thread OP. Is there a ruling on weapons lights? Or do I have to take mine off to be "stock" |
|
|
|
Posted: 9/16/2019 1:45:42 AM EDT
[#49]
A few more months left!
|
|
|
|
Posted: 9/16/2019 7:21:44 AM EDT
[#50]
Gotta try again with my new Mark IV. Lovin' this thing.
 Attached File |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
Attached File
Attached File
Attached File