User Panel
User Panel
User Panel
|
Posted: 6/21/2021 5:31:55 PM EDT
[#1]
Quote HistoryQuoted: Any FN 5.7's out there? You’re going to have a hard time finding slide milling for the Fiveseven since it’s got the polymer slide cover. DT-CAOS however however offers an aftermarket polymer cover for the slide that lets you mount an optic without any milling: https://fnspecialties.com/shop/bundles/dt-caos-five-seven-red-dot-mounting-system-by-dorin-technologies/ Only works with 2nd Gen FS pistols though |
|
|
|
Posted: 6/21/2021 5:34:01 PM EDT
[#2]
I have a Coonan 357 magnum with a Delta Point Pro on it.
|
|
|
|
Posted: 6/21/2021 5:37:35 PM EDT
[#3]
Quote HistoryQuoted: I have a Coonan 357 magnum with a Delta Point Pro on it. No pic, no happen |
|
|
|
Posted: 6/21/2021 5:38:18 PM EDT
[#4]
Quote HistoryQuoted: I have a langdon done slide... https://www.ar15.com/media/mediaFiles/3064/best_beretta_jpg-1811196_jpg-1986560.JPG Needs a X300U, but otherwise very nice 
|
|
|
|
Posted: 6/21/2021 5:39:44 PM EDT
[#5]
Quote HistoryQuoted: Any FN 5.7's out there? Yes! Or Ruger 5.7s I still want to see like a CZ 83 or makarov |
|
|
|
Posted: 6/21/2021 5:41:11 PM EDT
[#6]
Quote HistoryQuoted: A Hi-Power. Can't remember the shop that did it. @youngAR Got any pics to share? What optic? |
|
|
|
Posted: 6/21/2021 5:48:54 PM EDT
[#7]
Quote HistoryQuoted: @youngAR Got any pics to share? What optic? Quote HistoryQuoted: Quoted: A Hi-Power. Can't remember the shop that did it. @youngAR Got any pics to share? What optic? It’s Mk3 Firearms, pics are on the first page. They mount a RMR using the Trijicon plate intended for 1911s |
|
|
|
Posted: 6/21/2021 5:49:47 PM EDT
[#8]
Quote HistoryQuoted: Yes! Or Ruger 5.7s I still want to see like a CZ 83 or makarov The Ruger 5.7 comes with optic mount plates, no need to mill it. On the hunt for CZ and Makarov pics, stand by |
|
|
|
Posted: 6/21/2021 5:50:42 PM EDT
[#9]
Quote HistoryQuoted: It’s Mk3 Firearms, pics are on the first page. They mount a RMR using the Trijicon plate intended for 1911s What’s the new Holosun that’s thinner? |
|
|
|
Posted: 6/21/2021 6:01:06 PM EDT
[#10]
Quote HistoryQuoted: What’s the new Holosun that’s thinner? Quote HistoryQuoted: Quoted: It’s Mk3 Firearms, pics are on the first page. They mount a RMR using the Trijicon plate intended for 1911s What’s the new Holosun that’s thinner? 507K. Same footprint as the Shield RMSc and Sig Romeo0 |
|
|
|
Posted: 6/21/2021 6:03:14 PM EDT
[#11]
Not really unique, but I had Ashbury Precision do my HK45 and P30.
|
|
|
|
Posted: 6/21/2021 6:13:35 PM EDT
[#12]
Going to have a difficult time finding anything in the Makarov/CZ83/PPK envelope with a milled slide. The micro red dots like the Holosun 507K that would lend themselves to being put on one are relatively new and most people are hyper focused on the magic micro 9mm pistols (P365, Hellcat, etc) in that size range right now.
I will say this FOR ANYONE LOOKING TO GET AN ODDBALL PISTOL CUSTOM MILLED FOR AN OPTIC (emphasis for attention): CHPWS is known to do one-off custom slide milling that is otherwise not listed on their website. If you have a gun you want milled and can’t find anywhere else to do it, send an email to CHPWS before you give up. If it’s physically possible to do, they’ll let you know and get you fitted up |
|
|
|
Posted: 6/21/2021 6:23:31 PM EDT
[#13]
Quote HistoryQuoted: It’s Mk3 Firearms, pics are on the first page. They mount a RMR using the Trijicon plate intended for 1911s @Rudukai13 I am local to Mk3 and when I called the other day they said milling through them is for a specific optic only, so those multi-plate type cuts are not their thing. I would prefer to have some flexibility in optics but Mk3 is known for excellent work. Their cerakote is pretty high though, $350 for a single color on a rifle. |
|
|
|
Posted: 6/21/2021 6:33:31 PM EDT
[#14]
Quote HistoryQuoted: Not really unique, but I had Ashbury Precision do my HK45 and P30. https://i.imgur.com/EMTXtZk.jpg Never seen a p30 I’d call that unique! |
|
|
|
Posted: 6/21/2021 6:34:01 PM EDT
[#15]
Quote HistoryQuoted: A Hi-Power. Can't remember the shop that did it. If I ever win the lottery, I'd probably mill a P210. |
|
|
|
Posted: 6/21/2021 6:37:35 PM EDT
[#16]
Quote HistoryQuoted: Yep, I bought the slide separately from Langdon. Paired it with a Wilson guide rod/spring, and a Beretta threaded barrel. Went right on. I have all the Langdon trigger bits as well. Functions great. I kept the original slide so I can still go "old school(ish)" if I want to. https://www.ar15.com/media/mediaFiles/297684/20210621_135520_jpg-1986464.JPG The 92 has limited appeal for me, even though I shoot them well; that being said, that is a fine-looking piece. 
|
|
|
|
Posted: 6/21/2021 6:43:05 PM EDT
[#17]
Quote HistoryQuoted: Not really unique, but I had Ashbury Precision do my HK45 and P30. https://i.imgur.com/EMTXtZk.jpg |
|
|
|
Posted: 6/21/2021 6:44:46 PM EDT
[#18]
Quote HistoryQuoted: @Rudukai13 I am local to Mk3 and when I called the other day they said milling through them is for a specific optic only, so those multi-plate type cuts are not their thing. I would prefer to have some flexibility in optics but Mk3 is known for excellent work. Their cerakote is pretty high though, $350 for a single color on a rifle. Quote HistoryQuoted: Quoted: It’s Mk3 Firearms, pics are on the first page. They mount a RMR using the Trijicon plate intended for 1911s @Rudukai13 I am local to Mk3 and when I called the other day they said milling through them is for a specific optic only, so those multi-plate type cuts are not their thing. I would prefer to have some flexibility in optics but Mk3 is known for excellent work. Their cerakote is pretty high though, $350 for a single color on a rifle. Correct, they mill HPs specifically for the Trijicon RMR utilizing the Trijicon brand mounting plate designed to attach the RMR to a 1911. When I’m referring to pistol red dots as a group I say pistol optics, pistol RDS, etc. When I say RMR I’m referring specifically to the Trijicon brand Ruggedized Miniature Reflex pistol optic. This has somewhat become a “Kleenex/facial tissue” situation where a lot of people say RMR to refer to the group of objects in general |
|
|
|
Posted: 6/21/2021 6:49:19 PM EDT
[#19]
Quote HistoryQuoted: Correct, they mill HPs specifically for the Trijicon RMR utilizing the Trijicon brand mounting plate designed to attach the RMR to a 1911. When I’m referring to pistol red dots as a group I say pistol optics, pistol RDS, etc. When I say RMR I’m referring specifically to the Trijicon brand Ruggedized Miniature Reflex pistol optic. This has somewhat become a “Kleenex/facial tissue” situation where a lot of people say RMR to refer to the group of objects in general I’d love a 507k direct mounted to my FEG hi power specifically for a suppressor host |
|
|
|
Posted: 6/21/2021 7:00:25 PM EDT
[#20]
Quote HistoryQuoted: Not really unique, but I had Ashbury Precision do my HK45 and P30. https://i.imgur.com/EMTXtZk.jpg These are both definitely relevant to my interest. I like your style, sir. |
|
|
|
Posted: 6/21/2021 7:05:43 PM EDT
[#21]
Quote HistoryQuoted: What iron sights? Brilliant - want Quote HistoryQuoted: Quoted: Not really unique, but I had Ashbury Precision do my HK45 and P30. https://i.imgur.com/EMTXtZk.jpg Those are Heine suppressor sights on both guns. |
|
|
|
Posted: 6/21/2021 7:33:58 PM EDT
[#22]
Quote HistoryQuoted: "Milled" is a stretch, but I'll whore out this one more time for the homies  https://www.ar15.com/media/mediaFiles/227817/20210621_114227_jpg-1986340.JPG I love this gun. That was a great thread. Cheers for the entertainment |
|
|
|
Posted: 6/21/2021 8:37:23 PM EDT
[#23]
My Glock 19 and 43 both were milled by CHPWS to mount Holosun 507c and k respectively. I had the slides ceracoated by them at the same time.
 Attached FileMy .44 Redhawk mount for it's Fastfire dot started out life as a normal scope mount that held a Burris 2-7X optical scope. The mount used the rear sight groove to mount the rear and a barrel clamp as a front mount. It was just too unwieldy to use freehand with it's 7&1/2" barrel with that telescope on top, so I Bubba'ed the mount to half it's length and machined a single screw hole into the top strap to secure it's reduced length front. It's much, much easier to hunt with now.  Attached FileEvolution Weapon Systems provided a plate to mount a dot on my Sig P220 after I removed it's original rear sight.  Attached FileI can't remember where I got the mount to put a dot on my Ruger 22/45. That was 1998 and they cannot be found now, to my knowledge, but it mounted into the rear dovetail and made for a fairly low mount. |
|
|
|
Posted: 6/21/2021 8:44:49 PM EDT
[#24]
Quote HistoryQuoted: can't remember where I got the mount to put a dot on my Ruger 22/45. That was 1998 and they cannot be found now, to my knowledge, but it mounted into the rear dovetail and made for a fairly low mount. Back in the mid ‘90s I had a Tasco Pro Point or something to that effect on a B-Square mount on top of a Ruger MKII. Sorta miss it. |
|
|
|
Posted: 6/21/2021 9:19:29 PM EDT
[#25]
Quote HistoryQuoted: Back in the mid ‘90s I had a Tasco Pro Point or something to that effect on a B-Square mount on top of a Ruger MKII. Sorta miss it. All I can remember on the sight was it had the number 2000 in it's name. It finally died last fall...just got too weak for full sun shooting. and I put this Fastfire on the original mount.  Attached File |
|
|
|
Posted: 6/21/2021 11:41:41 PM EDT
[#26]
I did this for a buddy along and added a rail and have done an HK Mk23 for a customer (can't find the pics right now).
 Attached FileI did this on a spare Ruger Mk upper. I will silver solder on the plate to the body and refinish it later.  Attached File Attached File |
|
|
|
Posted: 6/21/2021 11:47:12 PM EDT
[#27]
Quote HistoryQuoted: I did this for a buddy along and added a rail and have done an HK Mk23 for a customer (can't find the pics right now). https://www.ar15.com/media/mediaFiles/72316/20190718_144903_jpg-1987098.JPG That is purdy  7.62x25 huh? Is it as blasty as 9x25?
|
|
|
|
Posted: 6/21/2021 11:54:09 PM EDT
[#28]
Quote HistoryQuoted: Silencer Co Maxim9 non NFA. https://i2.wp.com/www.gunsandtactics.com/wp-content/uploads/2019/07/Silencer-Co.jpg?fit=900%2C506&ssl=1 Radial delayed blowback 9mm. Still unavailable.  I think it's lever delayed? Love that design, if only they'd build one in .40
|
|
|
|
Posted: 6/21/2021 11:55:31 PM EDT
[#29]
Quote HistoryQuoted: Those are Heine suppressor sights on both guns. Quote HistoryQuoted: Quoted: Quoted: Not really unique, but I had Ashbury Precision do my HK45 and P30. https://i.imgur.com/EMTXtZk.jpg Those are Heine suppressor sights on both guns. I have those on my P30, my favorite pistol iron sights. |
|
|
|
Posted: 6/22/2021 6:06:40 PM EDT
[#30]
Bump
|
|
|
|
Posted: 6/22/2021 6:09:26 PM EDT
[#31]
ATEI did my Sig Sauer 227 Elite. Jam up
|
|
|
|
Posted: 6/22/2021 6:18:12 PM EDT
[#32]
I have a Broomhandle I'd like to get this done on anyone recommend a smith who could do it?
|
|
|
|
Posted: 6/22/2021 6:21:54 PM EDT
[#33]
Quote HistoryQuoted: That is purdy 7.62x25 huh? Is it as blasty as 9x25?Yes, 7.62x25. Has a very nice muzzle blast... |
|
|
|
Posted: 6/22/2021 6:24:32 PM EDT
[#34]
|
|
|
|
Posted: 6/22/2021 6:27:23 PM EDT
[#35]
Quote HistoryQuoted: Those are Heine suppressor sights on both guns. |
|
|
|
Posted: 6/22/2021 6:37:42 PM EDT
[#36]
|
|
|
|
Posted: 6/22/2021 7:02:22 PM EDT
[#37]
Quote HistoryQuoted: I have a Broomhandle I'd like to get this done on anyone recommend a smith who could do it? Quote HistoryQuoted: I have a Broomhandle I'd like to get this done on anyone recommend a smith who could do it? Quoted: I will say this FOR ANYONE LOOKING TO GET AN ODDBALL PISTOL CUSTOM MILLED FOR AN OPTIC (emphasis for attention): CHPWS is known to do one-off custom slide milling that is otherwise not listed on their website. If you have a gun you want milled and can’t find anywhere else to do it, send an email to CHPWS before you give up. If it’s physically possible to do, they’ll let you know and get you fitted up |
|
|
|
Posted: 6/22/2021 7:13:06 PM EDT
[#38]
I'm really trying to talk myself out of one of these:
|
|
|
|
Posted: 6/22/2021 7:13:55 PM EDT
[#39]
Quote HistoryQuoted: "Milled" is a stretch, but I'll whore out this one more time for the homies https://www.ar15.com/media/mediaFiles/227817/20210621_114227_jpg-1986340.JPG is legit. |
|
|
|
Posted: 6/22/2021 7:16:56 PM EDT
[#40]
Quote HistoryQuoted: Old metal S&Ws: https://i.postimg.cc/NfrN0vzy/Screen-Shot-2020-10-26-at-10-37-29-PM.png https://i.postimg.cc/Z5twBsGw/Screen-Shot-2020-10-26-at-10-37-41-PM.png https://i.postimg.cc/BQSc0CJn/20201031-114303-resized.jpg S&W should really bring these back as a "Fourth Gen" updated with all the modern goodies - doublestack 9mm, optics ready, full length dustcover with pic rail, etc |
|
|
|
Posted: 6/22/2021 7:54:52 PM EDT
[#41]
Quote HistoryQuoted: Quote HistoryQuoted: Quoted: I have a Broomhandle I'd like to get this done on anyone recommend a smith who could do it? Quoted: I will say this FOR ANYONE LOOKING TO GET AN ODDBALL PISTOL CUSTOM MILLED FOR AN OPTIC (emphasis for attention): CHPWS is known to do one-off custom slide milling that is otherwise not listed on their website. If you have a gun you want milled and can’t find anywhere else to do it, send an email to CHPWS before you give up. If it’s physically possible to do, they’ll let you know and get you fitted up @SeanC Yes CHPWS would be my only guess for that. If they do it though make sure to post up pictures! |
|
|
|
Posted: 6/22/2021 7:59:44 PM EDT
[#42]
Quote HistoryQuoted: Going to have a difficult time finding anything in the Makarov/CZ83/PPK envelope with a milled slide. The micro red dots like the Holosun 507K that would lend themselves to being put on one are relatively new and most people are hyper focused on the magic micro 9mm pistols (P365, Hellcat, etc) in that size range right now. I will say this FOR ANYONE LOOKING TO GET AN ODDBALL PISTOL CUSTOM MILLED FOR AN OPTIC (emphasis for attention): CHPWS is known to do one-off custom slide milling that is otherwise not listed on their website. If you have a gun you want milled and can’t find anywhere else to do it, send an email to CHPWS before you give up. If it’s physically possible to do, they’ll let you know and get you fitted up Hmm. I'm tempted to "modernize" a rather ratty mismatched Steyr-Hahn I have. |
|
|
|
Posted: 6/22/2021 8:00:22 PM EDT
[#43]
Quote HistoryQuoted: I have a Broomhandle I'd like to get this done on anyone recommend a smith who could do it? PM sent... |
|
|
|
Posted: 6/22/2021 8:07:42 PM EDT
[#44]
Archon Type B w/ RMR milling. The slide shape requires using a sealing plate or a Holosun with sealed battery compartment.
Pictured with threaded barrel that was unobtainable for a long time.  Attached File Attached File |
|
|
|
Posted: 6/22/2021 9:02:07 PM EDT
[#45]
Quote HistoryQuoted: Old metal S&Ws: https://i.postimg.cc/NfrN0vzy/Screen-Shot-2020-10-26-at-10-37-29-PM.png https://i.postimg.cc/Z5twBsGw/Screen-Shot-2020-10-26-at-10-37-41-PM.png https://i.postimg.cc/BQSc0CJn/20201031-114303-resized.jpg S&W should really bring these back as a “Fourth Gen” updated with all the modern goodies - doublestack 9mm, optics ready, full length dustcover with pic rail, etc Need to get rid of that ridiculous slide-mounted safety. Even on the 92, it's an eyesore. 5926 would be alright, or maybe 5927 in a proper two-tone; black frame and stainless slide. Mags are a bit low capacity for the size, might be able to get 17 rounds into a full size if they partnered with Mec Gar. |
|
|
|
Posted: 6/22/2021 9:19:11 PM EDT
[#46]
Quote HistoryQuoted: I have a Broomhandle I'd like to get this done on anyone recommend a smith who could do it? Thats hot |
|
|
|
Posted: 6/22/2021 9:22:08 PM EDT
[#47]
Glock 48MOS milled to accept a RMRcc. Not unique but usually people go with the shield or holosun and don’t mill
 Attached File |
|
|
|
Posted: 6/22/2021 10:16:07 PM EDT
[#48]
|
|
|
|
Posted: 6/22/2021 10:19:57 PM EDT
[#49]
 Attached File(Side note: I dislike how "RMR" has become genericized by some people to mean any mini/micro RDS.) |
|
|
|
Posted: 6/22/2021 10:23:27 PM EDT
[#50]
Quote HistoryI like that a lot |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
Attached File