User Panel
Quoted:
I'm going to buy a couple too. I'll just drive up to their office (I'll call ahead of course) next week. I may just get a long version, and a short version. Just to compare. Find out which one will launch a dildo farthest. Edit: Anyone fill a can with the "great stuff" foam for reusable projo's? View Quote Where are you guys finding a 2.6" dildo? Ever since seeing the DildAR I've wanted to launch one. |
|
|
View Quote This is the 40mm Chalk round. Scale up and make the rear one piece since you don't need it to be a shell and projectile. Attached File Attached File |
|
Quoted: I'll go ahead and be the first to ask it- Where are you guys finding a 2.6" dildo? Ever since seeing the DildAR I've wanted to launch one. View Quote |
|
|
|
|
|
I fired a couple tennis balls down range in my front yard when I got home from work. (Some of the many benefits of having 1 1/2 acres in the country - a front yard big enough to launch tennis balls from a Can Cannon and neighbors who aren't going to freak out when a guy shots such a thing in his front yard. I love it where I live.)
First impressions? One, it's definitely loud enough to warrant ear protection. Two, it's loud enough that my dog isn't going to want to play fetch with me. Three, tennis balls will travel at least a hundred yards. Four, launching them does do a bit of damage to tennis balls. I'm going to have to replace the dog's fetch balls now. Oh, and I now have a dedicated purpose for my blue PMAG. |
|
Quoted:
I fired a couple tennis balls down range in my front yard when I got home from work. (Some of the many benefits of having 1 1/2 acres in the country - a front yard big enough to launch tennis balls from a Can Cannon and neighbors who aren't going to freak out when a guy shots such a thing in his front yard. I love it where I live.) First impressions? One, it's definitely loud enough to warrant ear protection. Two, it's loud enough that my dog isn't going to want to play fetch with me. Three, tennis balls will travel at least a hundred yards. Four, launching them does do a bit of damage to tennis balls. I'm going to have to replace the dog's fetch balls now. Oh, and I now have a dedicated purpose for my blue PMAG. View Quote |
|
I find it interesting that so few people have done an inverted stock. When you finally get an aiming device, it becomes nearly impossible to shoulder and like down the sights simultaneously without some altered geometry.
That's actually my favorite part of this gun. The beautiful ugliness of functionality. Attached File |
|
Quoted:
Jeff from F5 Manufacturing sent me this can cannon for free when I showed him this thread! What a class act! Who’s ready to fling some poop?! https://www.AR15.Com/media/mediaFiles/464598/BF7F0668-B67F-4A8D-A77B-F6F17045A248-612995.JPG View Quote I called him this evening to pay for the one short barreled upper I was going to keep (returning the other 4), and he asked why I wanted to keep one. When I told him we were all curious about any difference in range between the two versions and I wanted to do an apples to apples comparison he said to just keep it no charge then. We talked for a while and he said he wanted to “donate it to the cause” in exchange for me posting up my results. Needless to say I’m tickled, because I was already going to do that anyway, and had already told him I was going to. Jeff: you rock Sir! Side note: a friend I work with thinks he still has some russian 50mm mortar parts (baseplate and legs) laying around somewhere buried in his hoard. If he can dig them up then I might have a start on a 66mm pop mortar. |
|
Quoted:
Someone with a 3D printer may be able to set themselves up a nice little cottage industry... This is the 40mm Chalk round. Scale up and make the rear one piece since you don't need it to be a shell and projectile. https://www.AR15.Com/media/mediaFiles/71432/chalk-613084.JPG https://www.AR15.Com/media/mediaFiles/71432/m781-613085.JPG View Quote Eta: Looks like incindiary is right in the definition. Is liquid an incindiary or are they talking about solids (1) any explosive, incendiary, or poison gas, (A) bomb, (B) grenade, (C) rocket having a propellant charge of more than 4 ounces, (D) missile having an explosive charge of more than 1/4 ounce, (E) mine or (F) similar device. |
|
Quoted:
I find it interesting that so few people have done an inverted stock. When you finally get an aiming device, it becomes nearly impossible to shoulder and like down the sights simultaneously without some altered geometry. That's actually my favorite part of this gun. The beautiful ugliness of functionality. https://www.AR15.Com/media/mediaFiles/75400/3E4CE1B1-7C91-4D36-A005-273EDBC96F73-613400.JPG View Quote I wonder who has the cheapest (but still not crappy) version of that stock now? ETA: ooooh, I kinda like this Elftmann stock. http://www.jsesurplus.com/elftmannultralightaluminumstock.aspx Attached File That might work well upside down too. Dang price is way too high for this purpose though. Off to look for airsoft clones I guess. Edit #2: hmmm... only $69 https://www.ebay.com/itm/GUNTEC-USA-AIRLITE-Minimalist-Stock-Set-BLACK-Spiral-FEATURELESS-Plate-Nut/112987452487?hash=item1a4e93b447%3Ag%3A0uEAAOSwWE9bPSBG&_sacat=0&_nkw=minimalist+stock&_from=R40&rt=nc Attached File |
|
Quoted:
I have a few side projects I need done before I get out again as well. View Quote View All Quotes View All Quotes |
|
I spoke with Jeff this evening and he told me about their new design they’re kicking out next week, should help with recoil
Badass! Attached File |
|
My replacement cannon arrived today! I can't wait to get it out this weekend. Already trying to come up with a decent yet cheap / easy way to add spring loaded fins (like was posted earlier for the rocket) to a soda can. Also thinking about how to add / pack / protect a bright orange streamer to aid in recover of projectiles that launch out of view. Sooooo many possibilities!
My super cheap stripped lower and lpk from PSA both also arrived today. I don't see how that company turns a profit with their pricing structure |
|
Quoted:
I spoke with Jeff this evening and he told me about their new design they’re kicking out next week, should help with recoil Badass! https://www.AR15.Com/media/mediaFiles/464598/5666C0F0-EF39-40F4-9192-CB1E0644A3B2-613489.JPG View Quote ETA: While it's a great spot for a VFG it looks like it would also be an ideal mounting point for extra-extra-long bipod legs / shooting sticks for the guys looking to make "mortar" style setups! |
|
Quoted: I’m thinking about it. I’d probably want to put a decent recoil pad on that buttplate. I wonder who has the cheapest (but still not crappy) version of that stock now? ETA: ooooh, I kinda like this Elftmann stock. http://www.jsesurplus.com/elftmannultralightaluminumstock.aspx https://www.AR15.Com/media/mediaFiles/53338/F07F1E65-E22D-4583-9567-C69C93947C17-613446.JPG That might work well upside down too. Dang price is way too high for this purpose though. Off to look for airsoft clones I guess. Edit #2: hmmm... only $69 https://www.ebay.com/itm/GUNTEC-USA-AIRLITE-Minimalist-Stock-Set-BLACK-Spiral-FEATURELESS-Plate-Nut/112987452487?hash=item1a4e93b447%3Ag%3A0uEAAOSwWE9bPSBG&_sacat=0&_nkw=minimalist+stock&_from=R40&rt=nc https://www.AR15.Com/media/mediaFiles/53338/A8C6AA66-52D7-47D6-B98A-85ABE4CA7C13-613473.JPG View Quote Attached File |
|
Will do!
|
|
Quoted:
Someone with a 3D printer may be able to set themselves up a nice little cottage industry... This is the 40mm Chalk round. Scale up and make the rear one piece since you don't need it to be a shell and projectile. https://www.AR15.Com/media/mediaFiles/71432/chalk-613084.JPG https://www.AR15.Com/media/mediaFiles/71432/m781-613085.JPG View Quote |
|
Quoted:
$140 seems more reasonable. https://www.AR15.Com/media/mediaFiles/75400/1598751E-D899-40D0-9C0C-B42E7A2CBE1A-613493.JPG View Quote View All Quotes View All Quotes Quoted:
Quoted: I’m thinking about it. I’d probably want to put a decent recoil pad on that buttplate. I wonder who has the cheapest (but still not crappy) version of that stock now? ETA: ooooh, I kinda like this Elftmann stock. http://www.jsesurplus.com/elftmannultralightaluminumstock.aspx https://www.AR15.Com/media/mediaFiles/53338/F07F1E65-E22D-4583-9567-C69C93947C17-613446.JPG That might work well upside down too. Dang price is way too high for this purpose though. Off to look for airsoft clones I guess. Edit #2: hmmm... only $69 https://www.ebay.com/itm/GUNTEC-USA-AIRLITE-Minimalist-Stock-Set-BLACK-Spiral-FEATURELESS-Plate-Nut/112987452487?hash=item1a4e93b447%3Ag%3A0uEAAOSwWE9bPSBG&_sacat=0&_nkw=minimalist+stock&_from=R40&rt=nc https://www.AR15.Com/media/mediaFiles/53338/A8C6AA66-52D7-47D6-B98A-85ABE4CA7C13-613473.JPG https://www.AR15.Com/media/mediaFiles/75400/1598751E-D899-40D0-9C0C-B42E7A2CBE1A-613493.JPG https://www.amazon.com/gp/product/B00Q3LVFEK/ref=od_aui_detailpages00?ie=UTF8&psc=1 Attached File It’ll probably be a turd, but I’m feeling lucky this evening so I rolled the dice. The reviews seem to state that the buttplate is actually steel instead of aluminum. I’ll get a gunsmith buddy to whip me up a cushy recoil pad for it. Also the straight buffer tube is open ended, so I might just hack it off to whatever length seems right when I get it. Edit: I just noticed it was a shorty when I ordered it. I guess I’ll not be hacking it any shorter! If it sucks then I’ll start price shopping for that Elf stock. That Elf definitely looks pretty cool, and it’s adjustable. |
|
Quoted:
That’ll be my backup plan if I don’t like this el’cheapo I just ordered: https://www.amazon.com/gp/product/B00Q3LVFEK/ref=od_aui_detailpages00?ie=UTF8&psc=1 https://www.AR15.Com/media/mediaFiles/53338/C62089CD-17F8-47BE-9D5A-EDA703843A24-613498.JPG It’ll probably be a turd, but I’m feeling lucky this evening so I rolled the dice. The reviews seem to state that the buttplate is actually steel instead of aluminum. I’ll get a gunsmith buddy to whip me up a cushy recoil pad for it. Also the straight buffer tube is open ended, so I might just hack it off to whatever length seems right when I get it. Edit: I just noticed it was a shorty when I ordered it. I guess I’ll not be hacking it any shorter! If it sucks then I’ll start price shopping for that Elf stock. That Elf definitely looks pretty cool, and it’s adjustable. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted: I’m thinking about it. I’d probably want to put a decent recoil pad on that buttplate. I wonder who has the cheapest (but still not crappy) version of that stock now? ETA: ooooh, I kinda like this Elftmann stock. http://www.jsesurplus.com/elftmannultralightaluminumstock.aspx https://www.AR15.Com/media/mediaFiles/53338/F07F1E65-E22D-4583-9567-C69C93947C17-613446.JPG That might work well upside down too. Dang price is way too high for this purpose though. Off to look for airsoft clones I guess. Edit #2: hmmm... only $69 https://www.ebay.com/itm/GUNTEC-USA-AIRLITE-Minimalist-Stock-Set-BLACK-Spiral-FEATURELESS-Plate-Nut/112987452487?hash=item1a4e93b447%3Ag%3A0uEAAOSwWE9bPSBG&_sacat=0&_nkw=minimalist+stock&_from=R40&rt=nc https://www.AR15.Com/media/mediaFiles/53338/A8C6AA66-52D7-47D6-B98A-85ABE4CA7C13-613473.JPG https://www.AR15.Com/media/mediaFiles/75400/1598751E-D899-40D0-9C0C-B42E7A2CBE1A-613493.JPG https://www.amazon.com/gp/product/B00Q3LVFEK/ref=od_aui_detailpages00?ie=UTF8&psc=1 https://www.AR15.Com/media/mediaFiles/53338/C62089CD-17F8-47BE-9D5A-EDA703843A24-613498.JPG It’ll probably be a turd, but I’m feeling lucky this evening so I rolled the dice. The reviews seem to state that the buttplate is actually steel instead of aluminum. I’ll get a gunsmith buddy to whip me up a cushy recoil pad for it. Also the straight buffer tube is open ended, so I might just hack it off to whatever length seems right when I get it. Edit: I just noticed it was a shorty when I ordered it. I guess I’ll not be hacking it any shorter! If it sucks then I’ll start price shopping for that Elf stock. That Elf definitely looks pretty cool, and it’s adjustable. |
|
Quoted:
Quoted:
Quoted:
Quoted: I’m thinking about it. I’d probably want to put a decent recoil pad on that buttplate. I wonder who has the cheapest (but still not crappy) version of that stock now? ETA: ooooh, I kinda like this Elftmann stock. http://www.jsesurplus.com/elftmannultralightaluminumstock.aspx https://www.AR15.Com/media/mediaFiles/53338/F07F1E65-E22D-4583-9567-C69C93947C17-613446.JPG That might work well upside down too. Dang price is way too high for this purpose though. Off to look for airsoft clones I guess. Edit #2: hmmm... only $69 https://www.ebay.com/itm/GUNTEC-USA-AIRLITE-Minimalist-Stock-Set-BLACK-Spiral-FEATURELESS-Plate-Nut/112987452487?hash=item1a4e93b447%3Ag%3A0uEAAOSwWE9bPSBG&_sacat=0&_nkw=minimalist+stock&_from=R40&rt=nc https://www.AR15.Com/media/mediaFiles/53338/A8C6AA66-52D7-47D6-B98A-85ABE4CA7C13-613473.JPG https://www.AR15.Com/media/mediaFiles/75400/1598751E-D899-40D0-9C0C-B42E7A2CBE1A-613493.JPG https://www.amazon.com/gp/product/B00Q3LVFEK/ref=od_aui_detailpages00?ie=UTF8&psc=1 https://www.AR15.Com/media/mediaFiles/53338/C62089CD-17F8-47BE-9D5A-EDA703843A24-613498.JPG It’ll probably be a turd, but I’m feeling lucky this evening so I rolled the dice. The reviews seem to state that the buttplate is actually steel instead of aluminum. I’ll get a gunsmith buddy to whip me up a cushy recoil pad for it. Also the straight buffer tube is open ended, so I might just hack it off to whatever length seems right when I get it. Edit: I just noticed it was a shorty when I ordered it. I guess I’ll not be hacking it any shorter! If it sucks then I’ll start price shopping for that Elf stock. That Elf definitely looks pretty cool, and it’s adjustable. I’ll be adding a recoil pad though. Yours looks “ouchy” for 16oz cans. ETA: the reason I figured it’d be a turd is because it didn’t cost “enough” If there’s nothing wrong with it then I’ll be tickled because it’s so cheap. |
|
Quoted:
I'm going to buy a couple too. I'll just drive up to their office (I'll call ahead of course) next week. I may just get a long version, and a short version. Just to compare. Find out which one will launch a dildo farthest. Edit: Anyone fill a can with the "great stuff" foam for reusable projo's? View Quote |
|
Quoted:
Well, then it isn’t a turd! I’ll be adding a recoil pad though. Yours looks “ouchy” for 16oz cans. ETA: the reason I figured it’d be a turd is because it didn’t cost “enough” If there’s nothing wrong with it then I’ll be tickled because it’s so cheap. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Quoted: I’m thinking about it. I’d probably want to put a decent recoil pad on that buttplate. I wonder who has the cheapest (but still not crappy) version of that stock now? ETA: ooooh, I kinda like this Elftmann stock. http://www.jsesurplus.com/elftmannultralightaluminumstock.aspx https://www.AR15.Com/media/mediaFiles/53338/F07F1E65-E22D-4583-9567-C69C93947C17-613446.JPG That might work well upside down too. Dang price is way too high for this purpose though. Off to look for airsoft clones I guess. Edit #2: hmmm... only $69 https://www.ebay.com/itm/GUNTEC-USA-AIRLITE-Minimalist-Stock-Set-BLACK-Spiral-FEATURELESS-Plate-Nut/112987452487?hash=item1a4e93b447%3Ag%3A0uEAAOSwWE9bPSBG&_sacat=0&_nkw=minimalist+stock&_from=R40&rt=nc https://www.AR15.Com/media/mediaFiles/53338/A8C6AA66-52D7-47D6-B98A-85ABE4CA7C13-613473.JPG https://www.AR15.Com/media/mediaFiles/75400/1598751E-D899-40D0-9C0C-B42E7A2CBE1A-613493.JPG https://www.amazon.com/gp/product/B00Q3LVFEK/ref=od_aui_detailpages00?ie=UTF8&psc=1 https://www.AR15.Com/media/mediaFiles/53338/C62089CD-17F8-47BE-9D5A-EDA703843A24-613498.JPG It’ll probably be a turd, but I’m feeling lucky this evening so I rolled the dice. The reviews seem to state that the buttplate is actually steel instead of aluminum. I’ll get a gunsmith buddy to whip me up a cushy recoil pad for it. Also the straight buffer tube is open ended, so I might just hack it off to whatever length seems right when I get it. Edit: I just noticed it was a shorty when I ordered it. I guess I’ll not be hacking it any shorter! If it sucks then I’ll start price shopping for that Elf stock. That Elf definitely looks pretty cool, and it’s adjustable. I’ll be adding a recoil pad though. Yours looks “ouchy” for 16oz cans. ETA: the reason I figured it’d be a turd is because it didn’t cost “enough” If there’s nothing wrong with it then I’ll be tickled because it’s so cheap. |
|
Quoted:
I got mine at a sportco while just browsing. I was originally going to modify a buffer tube to work 180° with the charging handle. That way you can use normal stocks. Maybe the side charger is the answer? View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
Quoted: I’m thinking about it. I’d probably want to put a decent recoil pad on that buttplate. I wonder who has the cheapest (but still not crappy) version of that stock now? ETA: ooooh, I kinda like this Elftmann stock. http://www.jsesurplus.com/elftmannultralightaluminumstock.aspx https://www.AR15.Com/media/mediaFiles/53338/F07F1E65-E22D-4583-9567-C69C93947C17-613446.JPG That might work well upside down too. Dang price is way too high for this purpose though. Off to look for airsoft clones I guess. Edit #2: hmmm... only $69 https://www.ebay.com/itm/GUNTEC-USA-AIRLITE-Minimalist-Stock-Set-BLACK-Spiral-FEATURELESS-Plate-Nut/112987452487?hash=item1a4e93b447%3Ag%3A0uEAAOSwWE9bPSBG&_sacat=0&_nkw=minimalist+stock&_from=R40&rt=nc https://www.AR15.Com/media/mediaFiles/53338/A8C6AA66-52D7-47D6-B98A-85ABE4CA7C13-613473.JPG https://www.AR15.Com/media/mediaFiles/75400/1598751E-D899-40D0-9C0C-B42E7A2CBE1A-613493.JPG https://www.amazon.com/gp/product/B00Q3LVFEK/ref=od_aui_detailpages00?ie=UTF8&psc=1 https://www.AR15.Com/media/mediaFiles/53338/C62089CD-17F8-47BE-9D5A-EDA703843A24-613498.JPG It’ll probably be a turd, but I’m feeling lucky this evening so I rolled the dice. The reviews seem to state that the buttplate is actually steel instead of aluminum. I’ll get a gunsmith buddy to whip me up a cushy recoil pad for it. Also the straight buffer tube is open ended, so I might just hack it off to whatever length seems right when I get it. Edit: I just noticed it was a shorty when I ordered it. I guess I’ll not be hacking it any shorter! If it sucks then I’ll start price shopping for that Elf stock. That Elf definitely looks pretty cool, and it’s adjustable. I’ll be adding a recoil pad though. Yours looks “ouchy” for 16oz cans. ETA: the reason I figured it’d be a turd is because it didn’t cost “enough” If there’s nothing wrong with it then I’ll be tickled because it’s so cheap. I don’t know if it’d jive right, but maybe cut the bolt release paddle off and slot it here: Attached File I’ll have to think on it later. |
|
Quoted:
I’d definitely like to have a side charger, but I want a left side charger for the ergos though. The right side chargers wouldn’t do it for me. I’m too cheap to buy a high dollar one for this, so if I get a really wild hair later I might just slot an upper and drill and tap the bolt carrier. I don’t know if it’d jive right, but maybe cut the bolt release paddle off and slot it here: https://www.AR15.Com/media/mediaFiles/53338/27B064B4-2071-444C-852A-AF74350D85B3-613545.JPG I’ll have to think on it later. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
Quoted: I’m thinking about it. I’d probably want to put a decent recoil pad on that buttplate. I wonder who has the cheapest (but still not crappy) version of that stock now? ETA: ooooh, I kinda like this Elftmann stock. http://www.jsesurplus.com/elftmannultralightaluminumstock.aspx https://www.AR15.Com/media/mediaFiles/53338/F07F1E65-E22D-4583-9567-C69C93947C17-613446.JPG That might work well upside down too. Dang price is way too high for this purpose though. Off to look for airsoft clones I guess. Edit #2: hmmm... only $69 https://www.ebay.com/itm/GUNTEC-USA-AIRLITE-Minimalist-Stock-Set-BLACK-Spiral-FEATURELESS-Plate-Nut/112987452487?hash=item1a4e93b447%3Ag%3A0uEAAOSwWE9bPSBG&_sacat=0&_nkw=minimalist+stock&_from=R40&rt=nc https://www.AR15.Com/media/mediaFiles/53338/A8C6AA66-52D7-47D6-B98A-85ABE4CA7C13-613473.JPG https://www.AR15.Com/media/mediaFiles/75400/1598751E-D899-40D0-9C0C-B42E7A2CBE1A-613493.JPG https://www.amazon.com/gp/product/B00Q3LVFEK/ref=od_aui_detailpages00?ie=UTF8&psc=1 https://www.AR15.Com/media/mediaFiles/53338/C62089CD-17F8-47BE-9D5A-EDA703843A24-613498.JPG It’ll probably be a turd, but I’m feeling lucky this evening so I rolled the dice. The reviews seem to state that the buttplate is actually steel instead of aluminum. I’ll get a gunsmith buddy to whip me up a cushy recoil pad for it. Also the straight buffer tube is open ended, so I might just hack it off to whatever length seems right when I get it. Edit: I just noticed it was a shorty when I ordered it. I guess I’ll not be hacking it any shorter! If it sucks then I’ll start price shopping for that Elf stock. That Elf definitely looks pretty cool, and it’s adjustable. I’ll be adding a recoil pad though. Yours looks “ouchy” for 16oz cans. ETA: the reason I figured it’d be a turd is because it didn’t cost “enough” If there’s nothing wrong with it then I’ll be tickled because it’s so cheap. I don’t know if it’d jive right, but maybe cut the bolt release paddle off and slot it here: https://www.AR15.Com/media/mediaFiles/53338/27B064B4-2071-444C-852A-AF74350D85B3-613545.JPG I’ll have to think on it later. |
|
Quoted: Yeah, its getting a wood Remington 1100 stock when it arrives. I thought about side-charging, but I dont want to drill/tap the proprietary bolt-carrier. At least this way, it's a pistol, I can make a rifle, change it back, do whatever. More flexibility. View Quote |
|
Quoted:
I spoke with Jeff this evening and he told me about their new design they’re kicking out next week, should help with recoil Badass! https://www.AR15.Com/media/mediaFiles/464598/5666C0F0-EF39-40F4-9192-CB1E0644A3B2-613489.JPG View Quote No biggie, but it is kinda neat. |
|
Quoted:
Side note: I like that sight. I wonder if it clears the width of the can? View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
Quoted: I’m thinking about it. I’d probably want to put a decent recoil pad on that buttplate. I wonder who has the cheapest (but still not crappy) version of that stock now? ETA: ooooh, I kinda like this Elftmann stock. http://www.jsesurplus.com/elftmannultralightaluminumstock.aspx https://www.AR15.Com/media/mediaFiles/53338/F07F1E65-E22D-4583-9567-C69C93947C17-613446.JPG That might work well upside down too. Dang price is way too high for this purpose though. Off to look for airsoft clones I guess. Edit #2: hmmm... only $69 https://www.ebay.com/itm/GUNTEC-USA-AIRLITE-Minimalist-Stock-Set-BLACK-Spiral-FEATURELESS-Plate-Nut/112987452487?hash=item1a4e93b447%3Ag%3A0uEAAOSwWE9bPSBG&_sacat=0&_nkw=minimalist+stock&_from=R40&rt=nc https://www.AR15.Com/media/mediaFiles/53338/A8C6AA66-52D7-47D6-B98A-85ABE4CA7C13-613473.JPG https://www.AR15.Com/media/mediaFiles/75400/1598751E-D899-40D0-9C0C-B42E7A2CBE1A-613493.JPG https://www.amazon.com/gp/product/B00Q3LVFEK/ref=od_aui_detailpages00?ie=UTF8&psc=1 https://www.AR15.Com/media/mediaFiles/53338/C62089CD-17F8-47BE-9D5A-EDA703843A24-613498.JPG It’ll probably be a turd, but I’m feeling lucky this evening so I rolled the dice. The reviews seem to state that the buttplate is actually steel instead of aluminum. I’ll get a gunsmith buddy to whip me up a cushy recoil pad for it. Also the straight buffer tube is open ended, so I might just hack it off to whatever length seems right when I get it. Edit: I just noticed it was a shorty when I ordered it. I guess I’ll not be hacking it any shorter! If it sucks then I’ll start price shopping for that Elf stock. That Elf definitely looks pretty cool, and it’s adjustable. I’ll be adding a recoil pad though. Yours looks “ouchy” for 16oz cans. ETA: the reason I figured it’d be a turd is because it didn’t cost “enough” If there’s nothing wrong with it then I’ll be tickled because it’s so cheap. I don’t know if it’d jive right, but maybe cut the bolt release paddle off and slot it here: https://www.AR15.Com/media/mediaFiles/53338/27B064B4-2071-444C-852A-AF74350D85B3-613545.JPG I’ll have to think on it later. I have the m203 sights with the wider spacer for detachable carry handles, so I’m hoping it’ll still stick out far enough that I can use an adapter later. Not sure though. If it looks like it’ll work I’ll likely order one. I just hate paying $40 for a pretty generic clamp. Here’s a pdf I found when trying to sort out what spacers went with what: https://nebula.wsimg.com/a3c0ac17a35cc89fd391ce2a1689ef99?AccessKeyId=2BC12C556C2779970E95&disposition=0&alloworigin=1 ETA: Instructions for use of the adapter start on page 4. Edit #2: here is an off brand one (could be identical or not?) for a little less. I have no idea if the dimensions are identical though. Suck if it didn’t work. https://www.amazon.com/Picatinny-Pica-tinny-Mount-Adapter-Launcher/dp/B01JSJSTGU/ref=sr_1_15?ie=UTF8&qid=1532072813&sr=8-15&keywords=picatinny+to+picatinny+adapter Edit #3: screw it, I ordered the Ordinance Group adapter off of Amazon. There’s still 1 left now: https://www.amazon.com/gp/product/B00THD0T3E/ref=od_aui_detailpages00?ie=UTF8&psc=1 Edit #4: Checked the spacing. The sights will clear easily. Might not even need the wide body spacer that is used on the ones made for detachable carry handles (check that when the adapter gets here). |
|
Quoted:
Yeah, he told me about that. Now that I see the pic I kinda wish I’d waited. No biggie, but it is kinda neat. View Quote View All Quotes View All Quotes Quoted:
Quoted:
I spoke with Jeff this evening and he told me about their new design they’re kicking out next week, should help with recoil Badass! https://www.AR15.Com/media/mediaFiles/464598/5666C0F0-EF39-40F4-9192-CB1E0644A3B2-613489.JPG No biggie, but it is kinda neat. Maybe for my next can cannon |
|
|
Quoted:
How abt making the rail flush then jbweld it? View Quote View All Quotes View All Quotes |
|
Based on what was posted earlier, M-18 smoke grenades can be launched, so I would imagine a military-style CS grenade would be no different. View Quote View All Quotes View All Quotes |
|
Quoted:
If one is meticulous in prepping it—- maybe the “aluminum welding rods”. Contour the rail surface. Clean and prep the barrel and rail surface. Tin both surfaces with rod. Then “weld” (actually braze) the two together. Refinish them. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Hmm I wonder how hard that would be to retrofit. Picatinny rail sections are very easy to come by but I'd want to either flatten a spot on the tube or hollow out the back of the rail so they sit flush. ! I’m just going to wrap the back half of my tube with paracord and call it good. Those alumiweld rods are garbage. You’d have enough heat for a long enough duration to both wreck the surrounding finish on the tube and craze/ruin the rest of the anodizing on the rail piece. You’d be better off just drilling a hole in the rail and quickly plug welding it to the tube with a TIG/MIG |
|
Quoted:
Just drill and tap the aluminum or use PEM fasteners. I’m just going to wrap the back half of my tube with paracord and call it good. Those alumiweld rods are garbage. You’d have enough heat for a long enough duration to both wreck the surrounding finish on the tube and craze/ruin the rest of the anodizing on the rail piece. You’d be better off just drilling a hole in the rail and quickly plug welding it to the tube with a TIG/MIG View Quote
|
|
|
Just FYI, the cheap $8 sack of Walmart Chinese tennis balls was very disappointing. They’re a bit under-bore, or the durometer of the rubber is wrong so they don’t obdurate (squish wider) in the bore on firing, or maybe just aren’t fuzzy enough to make a decent gas seal. I might have to try name brand Penn balls or something else.
According to tracking, my can cannon is maybe showing up today, two weeks late… but I was at a picnic/shoot with @jrpett last weekend, and we were shooting his. The full size cans went about 100 yards, and the small 8oz Sam’s Choice shorties went about 125 yards. We followed the advice in this thread to load them top-down, and did not have any of them burst on firing. But the cheap tennis balls I brought were crap, and only went 50-75 yards, max. And they were moving kind of lazily for even the disappointing distance they did fly. They weren’t spinning hard or curving in flight like some of the videos I’ve seen. My understanding is that different Walmarts may have different makes/brands of generic bulk tennis balls, so it’s possible ones from a different Chinese factory will fly better. But soda can trap shooting with a Saiga 12s and 10 round magazines is a hell of a lot of fun. So much fun, I can easily see building an event just around that alone. |
|
Quoted:
Just FYI, the cheap $8 sack of Walmart Chinese tennis balls was very disappointing. They’re a bit under-bore, or the durometer of the rubber is wrong so they don’t obdurate (squish wider) in the bore on firing, or maybe just aren’t fuzzy enough to make a decent gas seal. I might have to try name brand Penn balls or something else. According to tracking, my can cannon is maybe showing up today, two weeks late… but I was at a picnic/shoot with @jrpett last weekend, and we were shooting his. The full size cans went about 100 yards, and the small 8oz Sam’s Choice shorties went about 125 yards. We followed the advice in this thread to load them top-down, and did not have any of them burst on firing. But the cheap tennis balls I brought were crap, and only went 50-75 yards, max. And they were moving kind of lazily for even the disappointing distance they did fly. They weren’t spinning hard or curving in flight like some of the videos I’ve seen. My understanding is that different Walmarts may have different makes/brands of generic bulk tennis balls, so it’s possible ones from a different Chinese factory will fly better. But soda can trap shooting with a Saiga 12s and 10 round magazines is a hell of a lot of fun. So much fun, I can easily see building an event just around that alone. View Quote But then again, you could just throw it |
|
Quoted:
I’m not sure yet. I’ll eyeball my sight when I get time to get everything together. The sight in that pic is using a regular m203 quadrant sight, but they removed the carry handle clamp and used this adapter to mount it: https://exoticammo.com/products/picatinny-to-picatinny-clamp I have the m203 sights with the wider spacer for detachable carry handles, so I’m hoping it’ll still stick out far enough that I can use an adapter later. Not sure though. If it looks like it’ll work I’ll likely order one. I just hate paying $40 for a pretty generic clamp. Here’s a pdf I found when trying to sort out what spacers went with what: https://nebula.wsimg.com/a3c0ac17a35cc89fd391ce2a1689ef99?AccessKeyId=2BC12C556C2779970E95&disposition=0&alloworigin=1 ETA: Instructions for use of the adapter start on page 4. Edit #2: here is an off brand one (could be identical or not?) for a little less. I have no idea if the dimensions are identical though. Suck if it didn’t work. https://www.amazon.com/Picatinny-Pica-tinny-Mount-Adapter-Launcher/dp/B01JSJSTGU/ref=sr_1_15?ie=UTF8&qid=1532072813&sr=8-15&keywords=picatinny+to+picatinny+adapter Edit #3: screw it, I ordered the Ordinance Group adapter off of Amazon. There’s still 1 left now: https://www.amazon.com/gp/product/B00THD0T3E/ref=od_aui_detailpages00?ie=UTF8&psc=1 Edit #4: Checked the spacing. The sights will clear easily. Might not even need the wide body spacer that is used on the ones made for detachable carry handles (check that when the adapter gets here). View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
Quoted: I’m thinking about it. I’d probably want to put a decent recoil pad on that buttplate. I wonder who has the cheapest (but still not crappy) version of that stock now? ETA: ooooh, I kinda like this Elftmann stock. http://www.jsesurplus.com/elftmannultralightaluminumstock.aspx https://www.AR15.Com/media/mediaFiles/53338/F07F1E65-E22D-4583-9567-C69C93947C17-613446.JPG That might work well upside down too. Dang price is way too high for this purpose though. Off to look for airsoft clones I guess. Edit #2: hmmm... only $69 https://www.ebay.com/itm/GUNTEC-USA-AIRLITE-Minimalist-Stock-Set-BLACK-Spiral-FEATURELESS-Plate-Nut/112987452487?hash=item1a4e93b447%3Ag%3A0uEAAOSwWE9bPSBG&_sacat=0&_nkw=minimalist+stock&_from=R40&rt=nc https://www.AR15.Com/media/mediaFiles/53338/A8C6AA66-52D7-47D6-B98A-85ABE4CA7C13-613473.JPG https://www.AR15.Com/media/mediaFiles/75400/1598751E-D899-40D0-9C0C-B42E7A2CBE1A-613493.JPG https://www.amazon.com/gp/product/B00Q3LVFEK/ref=od_aui_detailpages00?ie=UTF8&psc=1 https://www.AR15.Com/media/mediaFiles/53338/C62089CD-17F8-47BE-9D5A-EDA703843A24-613498.JPG It’ll probably be a turd, but I’m feeling lucky this evening so I rolled the dice. The reviews seem to state that the buttplate is actually steel instead of aluminum. I’ll get a gunsmith buddy to whip me up a cushy recoil pad for it. Also the straight buffer tube is open ended, so I might just hack it off to whatever length seems right when I get it. Edit: I just noticed it was a shorty when I ordered it. I guess I’ll not be hacking it any shorter! If it sucks then I’ll start price shopping for that Elf stock. That Elf definitely looks pretty cool, and it’s adjustable. I’ll be adding a recoil pad though. Yours looks “ouchy” for 16oz cans. ETA: the reason I figured it’d be a turd is because it didn’t cost “enough” If there’s nothing wrong with it then I’ll be tickled because it’s so cheap. I don’t know if it’d jive right, but maybe cut the bolt release paddle off and slot it here: https://www.AR15.Com/media/mediaFiles/53338/27B064B4-2071-444C-852A-AF74350D85B3-613545.JPG I’ll have to think on it later. I have the m203 sights with the wider spacer for detachable carry handles, so I’m hoping it’ll still stick out far enough that I can use an adapter later. Not sure though. If it looks like it’ll work I’ll likely order one. I just hate paying $40 for a pretty generic clamp. Here’s a pdf I found when trying to sort out what spacers went with what: https://nebula.wsimg.com/a3c0ac17a35cc89fd391ce2a1689ef99?AccessKeyId=2BC12C556C2779970E95&disposition=0&alloworigin=1 ETA: Instructions for use of the adapter start on page 4. Edit #2: here is an off brand one (could be identical or not?) for a little less. I have no idea if the dimensions are identical though. Suck if it didn’t work. https://www.amazon.com/Picatinny-Pica-tinny-Mount-Adapter-Launcher/dp/B01JSJSTGU/ref=sr_1_15?ie=UTF8&qid=1532072813&sr=8-15&keywords=picatinny+to+picatinny+adapter Edit #3: screw it, I ordered the Ordinance Group adapter off of Amazon. There’s still 1 left now: https://www.amazon.com/gp/product/B00THD0T3E/ref=od_aui_detailpages00?ie=UTF8&psc=1 Edit #4: Checked the spacing. The sights will clear easily. Might not even need the wide body spacer that is used on the ones made for detachable carry handles (check that when the adapter gets here). The only thing you need to be concerned about is if it can look past the tube when held at a minimum of 20º. Anything below that can be done looking over the tube. Mine will clear the can 100% at any angle, but it's far enough away from the tube to make holding it awkward. |
|
Quoted:
Anyone run one of these with 7.62 blanks? View Quote ETA found it. It's X-Products, but it looks like they are th only ones who make one: https://www.xproducts.com/product/308-multi-use-launcher-mul/ |
|
my launchers are all pneumatic and sail nerf minivortexi out 75 - 100 yards
but they are designed to be "non" lethal i have built my own projectiles and the vortex minis are pretty much the standard i would think the 556 blank launch would tear the fins off though |
|
|
|
Quoted:
Pretty sure they make an AR-10/.308 can cannon ETA found it. It's X-Products, but it looks like they are th only ones who make one: https://www.xproducts.com/product/308-multi-use-launcher-mul/ View Quote |
|
View Quote |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.