User Panel
User Panel
User Panel
|
Posted: 3/31/2023 12:29:13 PM EST
[#1]
Quote HistoryOriginally Posted By PC-Tech: HA.... It's more the shipping cost than the size. The post office is a rip-off these days. Whatever fits in the small priority box is my limit on sending free stuff. lol Check out Shippo or Pirate Ship. Super cheap rates (all things considered). I ship about 90 orders a month, most are in the 11-12 oz range and cost is usually 4.50-5.15 depending on zone. |
|
|
|
|
Posted: 3/31/2023 12:42:49 PM EST
[#2]
Thanks, I will check them out.
|
|
|
|
|
Posted: 3/31/2023 1:57:02 PM EST
[#3]
Quote HistoryOriginally Posted By PC-Tech: The dimensional accuracy of parts depends a lot on the filament. ABS and ASA shrink by about 2~5% I think. A lot less with PLA and PETG. I had the MK2 which had very really good tolerances. I say the X1C I have is even better. I have not tested it though. Print-in-place parts, that I have downloaded seem to have tolerances built-in, always print too loose. Everything I have designed and printed with it seems to just fit. I can print you a sample of something from my X1C and mail it to you if you like. Nothing too big, please. Quote HistoryOriginally Posted By PC-Tech: Originally Posted By Panther1911: does anyone have both a X1(C) and a Prusa MK3S(+)? how is the quality difference? what about dimensional accuracy of parts? The dimensional accuracy of parts depends a lot on the filament. ABS and ASA shrink by about 2~5% I think. A lot less with PLA and PETG. I had the MK2 which had very really good tolerances. I say the X1C I have is even better. I have not tested it though. Print-in-place parts, that I have downloaded seem to have tolerances built-in, always print too loose. Everything I have designed and printed with it seems to just fit. I can print you a sample of something from my X1C and mail it to you if you like. Nothing too big, please. Thank you for the offer. I will have to think of a small item that would be a good example. |
|
|
|
|
Posted: 4/5/2023 11:28:20 AM EST
[#4]
Bridging demo that seems insane, but I don't keep up the tech in general, so it seems other printers should be possible too?
https://old.reddit.com/r/BambuLab/comments/12cfa5n/bridging_with_this_machine_is_insane/ |
|
|
|
|
Posted: 4/5/2023 1:47:13 PM EST
[Last Edit: -Obsessed-]
[#5]
Seems pretty good to me, but it's hard telling what layer height he is using. Adequate cooling and layer height/extrusion width are all that really go into bridging.
Though not sure why he needs a brim so thick. 
|
|
|
|
MT, USA
|
Posted: 4/5/2023 6:13:22 PM EST
[#6]
I haven't done anything that extreme but I have done a few of these types of designs. She's got several different types that are kinda neat.
https://thangs.com/designer/3dprintbunny/3d-model/Sailboat%20-%20no%20supports-106163 You do have to increase a few parameters. |
|
|
|
Posted: 4/9/2023 12:50:23 PM EST
[#7]
|
|
|
|
|
Posted: 4/12/2023 10:36:56 AM EST
[#8]
Someone out spreading the X1 gospel in Fosscad land. G19 frame print with multicolor and PETG supports.
https://old.reddit.com/r/fosscad/comments/12jlejo/fresh_off_the_printer_cmw_g192_standard_odg_w/ |
|
|
|
|
Posted: 4/12/2023 12:25:06 PM EST
[#9]
Quote HistoryOriginally Posted By mPisi: Someone out spreading the X1 gospel in Fosscad land. G19 frame print with multicolor and PETG supports. https://old.reddit.com/r/fosscad/comments/12jlejo/fresh_off_the_printer_cmw_g192_standard_odg_w/ Funny, I was just talking a day or two ago about using PETG as an interface layer.  That guy needs to show his purge speghetti. I know with the MMU2 on the Prusa the purge block can end up triple the size of the printed part.
|
|
|
|
MT, USA
|
Posted: 4/12/2023 1:37:08 PM EST
[#10]
I don't know if you are on Twitter but 3D Print General has been trying to do a 16 color Glock recently. Its a 4-5 day print with 1kg of purge/waste
|
|
|
|
Posted: 4/12/2023 2:04:01 PM EST
[#11]
The purge volume can get absurd, that and the time for shifting has kept me from doing any significant multifilament prints. I just enjoy the AMS for having several things ready to go. I will do the things with surface layers of other colors etc where it's just a couple of switches. My use of this as an appliance has kept me from getting into the settings to minimize the purge parameters. It's basically set to purge what you would need for two widely separated colors, it can be cut down a lot if it's not that important.
|
|
|
|
|
Posted: 4/18/2023 11:06:43 PM EST
[#12]
Returning to a 0.4 nozzle tonight, been using a 0.8 for some big garage hooks. It's not really saving much time.
Anyways, I went to move the AMS off the top, and instead of disconnecting the whole thing I decided to let it sit on its side on a shelf behind the machine. I had forgotten there was raw dessicant in open containers in it (since the lids all broke). I got the AMS about 45 degrees to the side when I heard the cascade of dessicant balls throughout the AMS. 0/10 do not recommend |
|
|
|
|
Posted: 4/22/2023 6:10:00 PM EST
[#13]
I hope he Loctight every screw in that printer...lol
 Benchy printed in 6:13 Bambu Lab P1P #speedboatrace |
|
|
|
|
Posted: 5/7/2023 3:16:25 PM EST
[#14]
Very cool, thanks @Tim_AZ
Livestreaming |
|
|
|
|
Posted: 5/7/2023 5:12:28 PM EST
[#15]
Quote HistoryOriginally Posted By PC-Tech: I hope he Loctight every screw in that printer...lol  https://www.youtube.com/watch?v=4KIB8gVLmrA
|
|
|
|
AZ, USA
|
Posted: 5/7/2023 7:13:44 PM EST
[#16]
This is incredible.
 [4K] Bad Apple!! But It's a 300-Hour 3D Print [Bambu Lab X1C] |
|
|
|
Posted: 6/21/2023 8:30:35 PM EST
[#17]
|
|
|
|
|
Posted: 6/22/2023 7:39:45 AM EST
[#18]
is the AMS worth it?
|
|
|
|
FL, USA
|
Posted: 6/22/2023 9:27:59 AM EST
[#19]
Quote HistoryOriginally Posted By Panther1911: is the AMS worth it? It's a $350 add-on. Is that what you mean? |
|
|
|
Posted: 6/22/2023 9:37:11 AM EST
[Last Edit: Panther1911]
[#20]
Quote HistoryOriginally Posted By Gage: It's a $350 add-on. Is that what you mean? Quote HistoryOriginally Posted By Gage: Originally Posted By Panther1911: is the AMS worth it? It's a $350 add-on. Is that what you mean? is it reliable, do you thing its worth the extra $350? do people who buy them actually take advantage of them? can you load it up with the same filament and set to switch when one runs out? ETA: I should have asked it this way: Those of you that bought the AMS, are you glad you did? Those that didn't, do you wish you did? |
|
|
|
|
Posted: 6/22/2023 9:46:54 AM EST
[Last Edit: AEnemaBay]
[#21]
Quote HistoryOriginally Posted By Panther1911: is it reliable, do you thing its worth the extra $350? do people who buy them actually take advantage of them? can you load it up with the same filament and set to switch when one runs out? I feel it's worth it simply for using it with support filament. Yes, you can load it with multiple rolls of the same filament and it will automatically switch to them if one roll runs out. |
|
|
|
FL, USA
|
Posted: 6/22/2023 9:54:04 AM EST
[#22]
Quote HistoryOriginally Posted By Panther1911: is it reliable, do you thing its worth the extra $350? do people who buy them actually take advantage of them? can you load it up with the same filament and set to switch when one runs out? Quote HistoryOriginally Posted By Panther1911: Originally Posted By Gage: Originally Posted By Panther1911: is the AMS worth it? It's a $350 add-on. Is that what you mean? is it reliable, do you thing its worth the extra $350? do people who buy them actually take advantage of them? can you load it up with the same filament and set to switch when one runs out? I've read many positive reviews on them. The reliability is on par with single spool printers. It wastes a LOT of filament on multi colored prints due to purging each color from the extruder/hot end during color changing and this slows a print dramatically. I would use it for that very rarely. The reviews I've read and watched favor using it for filament storage and have the option to use any of the 4 loaded filaments, so you can load a part file and start the print remotely if that's of interest to you. I don't know about the auto-switching when running out of filament but that would be very useful. I am going to order one but I probably won't use it for multi colored prints. |
|
|
|
Posted: 6/22/2023 11:48:23 AM EST
[Last Edit: mPisi]
[#23]
AMS definitely worth it for having multiple filaments on tap. Easy low humidity storage, instant access. I don't do many multifilament prints, and most of them are just a single top layer for embossing a logo or something. But it can do some amazing multifilament work with the known poop losses.
It will switch over to another roll when one runs out if the rolls are coded as being identical. They don't have to BE identical, you just have to tell the printer they are the same. So this is good for getting rid of multiple remnants left over on spools. If you're a reloader, think of the AMS as equivalent Dillon's automatic case feeder. The machine works without it and you can reload with manually loading cases in the tube (I did it for years), but having it is just handy and more efficient to the point it's almost standard equipment. |
|
|
|
|
Posted: 6/26/2023 11:44:51 PM EST
[#24]
Some sales from BL on their 1 year anniversary. I am happy to have started this thread and I certainly had tremendous fun and productivity with the X1C over the past year. Certainly seems like it's going to be well supported for a long time. I would definitely be in the market for the X1 XL when they make it.
https://blog.bambulab.com/bambu-lab-anniversary/ P1P discounted by $100 (seems permanent) $50 off AMS almost-free rolls of carbon fiber filament bonus for kickstarted backers and those who bought from the store.  Bambu Lab 1st Anniversary! |
|
|
|
|
Posted: 6/29/2023 12:24:52 AM EST
[#25]
this was kind of neat: https://tahaedilgen.com/portfolio/lego-drawer/
1050g PLA, about 18 hours.  video 2023 06 01 20 12 57 |
|
|
|
|
Posted: 7/11/2023 11:22:25 AM EST
[#26]
I just picked up a P1P. WOW this thing is amazing fast. The print quality is incredible too. I've only tried one print so far and everything was great except I'm getting wavy "ringing" in left and right axis print walls. Any tips on reducing that? With my Ender the solution was to tighten the belt but I'm not sure with this one yet. I'm using PETG+.
 Attached File |
|
|
|
|
Posted: 7/11/2023 11:23:33 AM EST
[Last Edit: mPisi]
[#27]
Bambu Lab has announced a new model P1S, which seems to be a P1P with plastic enclosure and the interior fans and filters similar to an X1C. May be bundled with an AMS.
Also rumors, based on patent filings, of an X1S which may be an X1C without the lidar (similar to the original X1 which quickly was phased out I think), and most promising, an X1E which may be a larger build area.  Attached File |
|
|
|
|
Posted: 7/11/2023 11:26:32 AM EST
[#28]
Quote HistoryOriginally Posted By mancow: I just picked up a P1P. WOW this thing is amazing fast. The print quality is incredible too. I've only tried one print so far and everything was great except I'm getting wavy "ringing" in left and right axis print walls. Any tips on reducing that? With my Ender the solution was to tighten the belt but I'm not sure with this one yet. I'm using PETG+. https://www.ar15.com/media/mediaFiles/168134/20230711_111928_jpg-2881898.JPG I don't know on that specific issue, I'm not much of a troubleshooter. I think the PETG profiles in the slicer are not very advanced, you can probably find some advice on better settings. |
|
|
|
|
Posted: 7/11/2023 11:30:50 AM EST
[Last Edit: -Obsessed-]
[#29]
Quote HistoryOriginally Posted By mancow: I just picked up a P1P. WOW this thing is amazing fast. The print quality is incredible too. I've only tried one print so far and everything was great except I'm getting wavy "ringing" in left and right axis print walls. Any tips on reducing that? With my Ender the solution was to tighten the belt but I'm not sure with this one yet. I'm using PETG+. https://www.ar15.com/media/mediaFiles/168134/20230711_111928_jpg-2881898.JPG That's usually a PWM issue. With how locked down Bambu is I'm not even sure if that's adjustable though. No familiarity with Bambu. On a Prusa you can calibrate for it. It's called an extruder linearity calibration. It's caused by an imperfect Trinamic wave form reproduction by the driver. |
|
|
|
|
Posted: 7/11/2023 12:35:55 PM EST
[Last Edit: mancow]
[#30]
Quote HistoryOriginally Posted By -Obsessed-: That's usually a PWM issue. With how locked down Bambu is I'm not even sure if that's adjustable though. No familiarity with Bambu. On a Prusa you can calibrate for it. It's called an extruder linearity calibration. It's caused by an imperfect Trinamic wave form reproduction by the driver. Quote HistoryOriginally Posted By -Obsessed-: Originally Posted By mancow: I just picked up a P1P. WOW this thing is amazing fast. The print quality is incredible too. I've only tried one print so far and everything was great except I'm getting wavy "ringing" in left and right axis print walls. Any tips on reducing that? With my Ender the solution was to tighten the belt but I'm not sure with this one yet. I'm using PETG+. https://www.ar15.com/media/mediaFiles/168134/20230711_111928_jpg-2881898.JPG That's usually a PWM issue. With how locked down Bambu is I'm not even sure if that's adjustable though. No familiarity with Bambu. On a Prusa you can calibrate for it. It's called an extruder linearity calibration. It's caused by an imperfect Trinamic wave form reproduction by the driver. I just found the details about it on their site. They say it's a belt tension issue. Their procedure is to loosen screws and move the axis a certain way and there is an automatic tensioner that should adjust it. Then the unit goes through another resonant frequency calibration to adjust to the new parameters. I'll give it a try tonight if i get time. When they say these are pretty much plug and play they are right. I have never had this quality of a print right off the bat with zero issues other than the ringing, especially with PETG. This initial print is better than anything I could get from my modded Ender. The biggest surprise for me is there is absolutely zero stringing, none. Every small hole and detail is perfect with no post print cleanup of any areas needed. It's literally one and done. |
|
|
|
|
Posted: 7/12/2023 11:53:52 AM EST
[#31]
I tried the belt tension adjustment procedure and tried it. It didn't help anything. From what I've read nobody has come up with a fix. I wonder if it's something to do with the type of motors or drivers they are using.
|
|
|
|
|
Posted: 7/13/2023 7:16:09 PM EST
[#32]
P1S is available now. $700 or $950 with AMS. P1P is $600 now.
BL is also selling the factory parts to upgrayyyed a P1P to P1S. |
|
|
|
FL, USA
|
Posted: 7/14/2023 1:43:59 AM EST
[Last Edit: Gage]
[#33]
What’s different? They look the same. I see part cooling fan. I this one enclosed?
|
|
|
|
Posted: 7/14/2023 9:38:06 AM EST
[#34]
Yes, basically the enclosure. If it's only the 4 pieces now sold on the BL site (I haven't looked at it in detail), you could actually upgrade a P1P for $90 (plus shipping) versus $100 for the factory P1S.
|
|
|
|
|
Posted: 8/21/2023 4:11:30 PM EST
[#35]
In a moment of weakness (a.k.a. "a moment of foolishness") I just ordered a P1S with some accessories. ETA before Sept. 5.
I'm quite sure that I ordered more 'stuff' than I need, but I plan to do a number of experiments with different filaments, nozzle sizes, and bed materials, so I went a bit overboard. I also ordered more filament than I ought to have - will have to figure out a relatively humidity-proof bin to keep the spools in, along with dessicant. While the X1 Carbon looked interesting, I couldn't really justify the extra cost (because I doubt that I'll be printing any of the 'exotic' filaments, and while the LIDAR sounds interesting and the color display looks cool, I can live without them). As it is, by adding a bunch of accessories and filament to my order, I bumped up the cost to close to X1 Carbon territory for the machine alone. My prior 3D printing experience has been with a Makerbot clone from Micro Center. Hoping for a giant leap forward in my capabilities - but have much learning ahead of me... (I also ordered a 20W Ortur laser in yet another "moment of weakness". Yeah, I like playing with my toys.) |
|
|
|
AZ, USA
|
Posted: 8/21/2023 5:53:55 PM EST
[#36]
I ordered and received a P1S; its a pretty nice printer but the software is hot garbage.
My vorons still print nicer and faster and are way more customizable but the price for a "dont need to mess" with it + ams is pretty hard to beat. Did I say the software is hot garbage...i cant emphasize that enough. |
|
|
|
Posted: 8/21/2023 6:00:39 PM EST
[#37]
Quote HistoryOriginally Posted By sanitywarped: I ordered and received a P1S; its a pretty nice printer but the software is hot garbage. My vorons still print nicer and faster and are way more customizable but the price for a "dont need to mess" with it + ams is pretty hard to beat. Did I say the software is hot garbage...i cant emphasize that enough. What specifically about it is ‘hot garbage’? Slicer? Controls? Something else? |
|
|
|
AZ, USA
|
Posted: 8/21/2023 7:24:43 PM EST
[#38]
Quote HistoryOriginally Posted By targetworks: What specifically about it is ‘hot garbage’? Slicer? Controls? Something else? Quote HistoryOriginally Posted By targetworks: Originally Posted By sanitywarped: I ordered and received a P1S; its a pretty nice printer but the software is hot garbage. My vorons still print nicer and faster and are way more customizable but the price for a "dont need to mess" with it + ams is pretty hard to beat. Did I say the software is hot garbage...i cant emphasize that enough. What specifically about it is ‘hot garbage’? Slicer? Controls? Something else? Slicer is ok but not nearly as many options as i would like (Orca Slicer is a little better in that regard) AMS functionality was very hit or miss on the software. Previous patch had it where i couldnt change any settings on the AMS, had to use the phone app to do those changes. Another thing is its not responsive (take a bit for changes to take). Setting nozzle temp/bed temp if you are just testing some things is slow or doesnt take though that is a little niche, normal prints dont really get affected by it. Pretty much comparing mainsail/fluidd to the app is night an day. Also the camera is terrible; though this is more hardware and not software related. |
|
|
|
Posted: 8/21/2023 7:40:58 PM EST
[#39]
Quote HistoryOriginally Posted By sanitywarped: Slicer is ok but not nearly as many options as i would like (Orca Slicer is a little better in that regard) AMS functionality was very hit or miss on the software. Previous patch had it where i couldnt change any settings on the AMS, had to use the phone app to do those changes. Another thing is its not responsive (take a bit for changes to take). Setting nozzle temp/bed temp if you are just testing some things is slow or doesnt take though that is a little niche, normal prints dont really get affected by it. Pretty much comparing mainsail/fluidd to the app is night an day. Also the camera is terrible; though this is more hardware and not software related. Quote HistoryOriginally Posted By sanitywarped: Originally Posted By targetworks: Originally Posted By sanitywarped: I ordered and received a P1S; its a pretty nice printer but the software is hot garbage. My vorons still print nicer and faster and are way more customizable but the price for a "dont need to mess" with it + ams is pretty hard to beat. Did I say the software is hot garbage...i cant emphasize that enough. What specifically about it is ‘hot garbage’? Slicer? Controls? Something else? Slicer is ok but not nearly as many options as i would like (Orca Slicer is a little better in that regard) AMS functionality was very hit or miss on the software. Previous patch had it where i couldnt change any settings on the AMS, had to use the phone app to do those changes. Another thing is its not responsive (take a bit for changes to take). Setting nozzle temp/bed temp if you are just testing some things is slow or doesnt take though that is a little niche, normal prints dont really get affected by it. Pretty much comparing mainsail/fluidd to the app is night an day. Also the camera is terrible; though this is more hardware and not software related. Yes, IIRC the camera does all of 5fps - which I will probably supplant. I haven’t yet decided exactly how I’m going to use the AMS - at least I’m not planning on doing any multi-color jobs. But dialing in the settings will be important, especially with the variety of filament types I’m planning to use. I am thinking of routinely using the phone app rather than the built-in display/controller panel (although I have not yet had hands-on with it). |
|
|
|
|
Posted: 8/21/2023 7:50:09 PM EST
[#40]
Quote HistoryOriginally Posted By targetworks: In a moment of weakness (a.k.a. "a moment of foolishness") I just ordered a P1S with some accessories. ETA before Sept. 5. I'm quite sure that I ordered more 'stuff' than I need, but I plan to do a number of experiments with different filaments, nozzle sizes, and bed materials, so I went a bit overboard. I also ordered more filament than I ought to have - will have to figure out a relatively humidity-proof bin to keep the spools in, along with dessicant. While the X1 Carbon looked interesting, I couldn't really justify the extra cost (because I doubt that I'll be printing any of the 'exotic' filaments, and while the LIDAR sounds interesting and the color display looks cool, I can live without them). As it is, by adding a bunch of accessories and filament to my order, I bumped up the cost to close to X1 Carbon territory for the machine alone. My prior 3D printing experience has been with a Makerbot clone from Micro Center. Hoping for a giant leap forward in my capabilities - but have much learning ahead of me... (I also ordered a 20W Ortur laser in yet another "moment of weakness". Yeah, I like playing with my toys.) Read up on throughput limitations of Bambu. People are starting to wake up. Finally. The max throughput is 12mm³/s which means you'll never hit their claimed speed unless using a tiny nozzle and even smaller layer height. Reality and Qidi caught onto this and their throughputs are 32 and 35, respectively. Meaning they can lay down essentially triple the filament. |
|
|
|
NM, USA
|
Posted: 8/21/2023 10:17:32 PM EST
[Last Edit: linuxgnar]
[#41]
I've been a prusa person for many years. Mk2 --> mk 2.5s. Mmu --> mmu2s (mmus never worked for me though). And sometimes it can be a pain but the thing is I can make parts for it and tweak it and get it printing again in an afternoon. And I can upgrade it. And it prints freaking great.
I'm interested in the Bambu mostly because I'm older and don't have the time to fuck with shit anymore. I'm also not in the mood to have to have to wait for customer support when something isn't working. So I'm in a weird spot. I prefer open source by a long shot. Bambu? Diy voron instead? I dunno. I just want to print great and fast and not have to tweak things too much anymore. And I want to print nylonX and every thing under the sun without thinking about it. Recommendations please 😅 |
|
|
|
Posted: 8/21/2023 10:19:13 PM EST
[#42]
Quote HistoryOriginally Posted By linuxgnar: I've been a prusa person for many years. Mk2 --> mk 2.5s. Mmu --> mmu2s (mmus never worked for me though). And sometimes it can be a pain but the thing is I can make parts for it and tweak it and get it printing again in an afternoon. And I can upgrade it. And it prints freaking great. I'm interested in the Bambu mostly because I'm older and don't have the time to fuck with shit anymore. I'm also not in the mood to have to have to wait for customer support when something isn't working. So I'm in a weird spot. I prefer open source by a long shot. Bambu? Diy voron instead? I dunno. I just want to print great and fast and not have to tweak things too much anymore. And I want to print nylonX and every thing under the sun without thinking about it. Recommendations please 😅 I'd look at Qidi X Max 3. |
|
|
|
|
Posted: 8/21/2023 11:05:07 PM EST
[#43]
You haters missed the whole debacle where the cloud system caused a bunch of printers to start printing in the middle of the night, whether or not the build plate was empty.
BL fixing a bunch of printers and sending out filament to make up for the wastage  https://blog.bambulab.com/update-for-cloud-downtime/ I did get the anniversary gift of 3kg advanced filaments that was announced a few months ago. I haven't done much printing lately. Last month I burned through a bunch of old half-rolls printing storage boxes to use in my shop. 0.8 nozzle is a chunky monkey. So my printer storage area is a little cleaner. |
|
|
|
AZ, USA
|
Posted: 8/22/2023 9:09:12 AM EST
[#44]
I would say a bambu printer is decent printer depending on your use cases. I probably wouldnt go for it for a print farm (cloud requirement is terrabad) or for speed (though it does print pretty fast). It does have limitations but I think its a pretty good entry point for multifilament printing (which is why i got it). I still much prefer my vorons but the p1s is a good fallback if i ever need to print abs/asa and the vorons are all out of commision
|
|
|
|
Posted: 8/22/2023 11:08:08 AM EST
[#45]
Quote HistoryOriginally Posted By sanitywarped: I probably wouldnt go for it for a print farm (cloud requirement is terrabad) Is there a primer somewhere on how a print farm is set up for workflow? I assume not wanting cloud due to exposure to China. But there is LAN and completely offline options, what are the connection needs to manage the operation? I don't know how commercial they are but I have seen setups with many multiple BL printers running. |
|
|
|
AZ, USA
|
Posted: 8/22/2023 11:38:27 AM EST
[#46]
Quote HistoryOriginally Posted By mPisi: Is there a primer somewhere on how a print farm is set up for workflow? I assume not wanting cloud due to exposure to China. But there is LAN and completely offline options, what are the connection needs to manage the operation? I don't know how commercial they are but I have seen setups with many multiple BL printers running. The p1 series dont allow you to use lan connectivity without cloud connectivity (dumb) so it would be sd card and sneakernet only if you dont use the cloud. I say no to print farms since they are fast there are faster printers out there that print at good quality. I dont know if there is a workflow or not but I would imagine there is. |
|
|
|
Posted: 8/22/2023 8:46:39 PM EST
[Last Edit: targetworks]
[#47]
Do people actually use a glue stick on the build plate, applying it before every print, and cleaning it off after every print?
For some filament types but not others, or for all types? For some build plate types but not others? |
|
|
|
|
Posted: 8/22/2023 9:47:46 PM EST
[#48]
I used Vision Miner Nano adhesive on the original bed, it seemed to work fine. I've never understood glue sticks.
Then bought a PEI plate and now I run it naked for PLA unless I have problems with something that has a very small base. In those cases I clean with alcohol and then use the Nano on it too. It really has too much adhesion for PETG, realy have to scrape that stuff off. |
|
|
|
FL, USA
|
Posted: 8/31/2023 2:58:53 PM EST
[#49]
Quote HistoryOriginally Posted By sanitywarped: The p1 series dont allow you to use lan connectivity without cloud connectivity (dumb) so it would be sd card and sneakernet only if you dont use the cloud. I say no to print farms since they are fast there are faster printers out there that print at good quality. I dont know if there is a workflow or not but I would imagine there is. Quote HistoryOriginally Posted By sanitywarped: Originally Posted By mPisi: Is there a primer somewhere on how a print farm is set up for workflow? I assume not wanting cloud due to exposure to China. But there is LAN and completely offline options, what are the connection needs to manage the operation? I don't know how commercial they are but I have seen setups with many multiple BL printers running. The p1 series dont allow you to use lan connectivity without cloud connectivity (dumb) so it would be sd card and sneakernet only if you dont use the cloud. I say no to print farms since they are fast there are faster printers out there that print at good quality. I dont know if there is a workflow or not but I would imagine there is. Does the X1 Carbon allow LAN without Cloud? I really don’t want cloud access in anything. |
|
|
AZ, USA
|
Posted: 8/31/2023 3:26:25 PM EST
[#50]
Quote HistoryOriginally Posted By Gage: Does the X1 Carbon allow LAN without Cloud? I really don’t want cloud access in anything. Quote HistoryOriginally Posted By Gage: Originally Posted By sanitywarped: Originally Posted By mPisi: Is there a primer somewhere on how a print farm is set up for workflow? I assume not wanting cloud due to exposure to China. But there is LAN and completely offline options, what are the connection needs to manage the operation? I don't know how commercial they are but I have seen setups with many multiple BL printers running. The p1 series dont allow you to use lan connectivity without cloud connectivity (dumb) so it would be sd card and sneakernet only if you dont use the cloud. I say no to print farms since they are fast there are faster printers out there that print at good quality. I dont know if there is a workflow or not but I would imagine there is. Does the X1 Carbon allow LAN without Cloud? I really don’t want cloud access in anything. Ok so I tried reading up on it and have come up with confusing/conflicting information. So the X1c can do LAN only, though im reading conflicting information in that its ftp upload only and no app and other posts saying the app works (could have been an update). Also people have mentioned that they got LAN only mode working on the p1p so ill need to revisit that and see if I can get that working on the P1S |
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
Attached File
