Member
Joined:
Jun 2022
Posts:
14577
EE: 100% (31)
TX, USA
Posted: Yesterday 6:03:42 PM EDT
| They are readily available and very inexpensive right now. I have modified them for a Taurus 99 by slightly enlarging the mag catch slot. I have also made them work in an Arex Zero 1 by cutting a new catch on the front of the mag tube. Has anyone used them in something else? |
“That’s not how it works. You buy more tools and power than you need and as you fuck everything up you gain the knowledge to become a better carpenter.”
Tveddy
Tveddy
Member
Joined:
Jun 2022
Posts:
14578
EE: 100% (31)
TX, USA
| I have read they will work in a High Power with some judicial use of a Dremel tool. I might try that tonight. |
“That’s not how it works. You buy more tools and power than you need and as you fuck everything up you gain the knowledge to become a better carpenter.”
Tveddy
Tveddy
|
I have looked into this as well in the past, here is a list off of reddit of ones that apparently work if you modify or cut a new catch cutout: Glock G43X Glock G48 Arex Zero (thanks u/CDKJudoka) Gen 1.0 S&W M&P 40 (thanks u/antiquated_reality) CZ75 series SIG P226 Taurus S&W 59 Springfield XD Walther P99 (thanks u/sovereigndevelopment) AREX Zero (thanks) Canik TP9 series (thanks /u/Logizyme) M&P 9 |
a loaded gun won’t set you free, so you say…
Member
Joined:
Jun 2022
Posts:
14579
EE: 100% (31)
TX, USA
|
Originally Posted By nvroundman: Just remember that dremel smithing requires pictures.  I was waiting for someone to call me out on that. Factory Arex VS M9. All I had to do besides measure with calipers was to drill a hole and file the top of it. |
“That’s not how it works. You buy more tools and power than you need and as you fuck everything up you gain the knowledge to become a better carpenter.”
Tveddy
Tveddy
Big girls make all your dreams come true!
Joined:
Dec 2001
Posts:
63697
EE: 100% (4)
WV, USA
|
Originally Posted By Curmudgeon762: https://www.ar15.com/media/mediaFiles/563702/image-3832261.jpg I was waiting for someone to call me out on that. Factory Arex VS M9. All I had to do besides measure with calipers was to drill a hole and file the top of it. Thats interesting about the Arex. I have a compact Arex, their mags can be hard to find. |
I've met cats and dogs smarter than Cory and Trevor.
Member
Joined:
Jun 2022
Posts:
14581
EE: 100% (31)
TX, USA
|
Originally Posted By colklink: Thats interesting about the Arex. I have a compact Arex, their mags can be hard to find.  Sticks out but works. The full size Arex is spot on. Finding mags for those pistols is what lead me down this rabbit hole. |
“That’s not how it works. You buy more tools and power than you need and as you fuck everything up you gain the knowledge to become a better carpenter.”
Tveddy
Tveddy
Big girls make all your dreams come true!
Joined:
Dec 2001
Posts:
63698
EE: 100% (4)
WV, USA
|
Originally Posted By Curmudgeon762: https://www.ar15.com/media/mediaFiles/563702/image-3832269.jpg Sticks out but works. The full size Arex is spot on. Finding mags for those pistols is what lead me down this rabbit hole. I just got an email notification that gun mag warehouse has the ones I'm looking for in stock, but I've spent all my fun money for awhile. |
I've met cats and dogs smarter than Cory and Trevor.
Member
Joined:
Jun 2022
Posts:
14582
EE: 100% (31)
TX, USA
|
Originally Posted By intercooler: Where are said cheap surplus m9 magazines? I believe there are some on EE for $10 a piece. I bought 20 on Tacswap for $125 |
“That’s not how it works. You buy more tools and power than you need and as you fuck everything up you gain the knowledge to become a better carpenter.”
Tveddy
Tveddy
|
Originally Posted By lightning351: I can say for a fact,that they work in sig 226,I have a dozen ive cut new notches in,and they are 100%. |
I hated going to weddings. All the grandmas would poke me and say "You're next". They stopped that when I started doing it to them at funerals.
Sic semper evello mortem tyrannis
Sic semper evello mortem tyrannis
|
Originally Posted By Curmudgeon762: I believe there are some on EE for $10 a piece. I bought 20 on Tacswap for $125 Originally Posted By Curmudgeon762: Originally Posted By intercooler: Where are said cheap surplus m9 magazines? I believe there are some on EE for $10 a piece. I bought 20 on Tacswap for $125 Yeah with as many guns as they can be made to work with, kind of hard not to lay some back into storage just in case. I have a pile of them, and don’t even own a Beretta 92 currently! |
a loaded gun won’t set you free, so you say…
|
Originally Posted By intercooler: Where are said cheap surplus m9 magazines? He has M9 mags often for around $10 each. |
I hated going to weddings. All the grandmas would poke me and say "You're next". They stopped that when I started doing it to them at funerals.
Sic semper evello mortem tyrannis
Sic semper evello mortem tyrannis
I suggest we trade a question mark in for a maybe.
Joined:
Feb 2008
Posts:
51691
EE: 100% (90)
IA, USA
|
Originally Posted By Curmudgeon762: I believe there are some on EE for $10 a piece. I bought 20 on Tacswap for $125 Originally Posted By Curmudgeon762: Originally Posted By intercooler: Where are said cheap surplus m9 magazines? I believe there are some on EE for $10 a piece. I bought 20 on Tacswap for $125 There are. I've been looking for 96 mags and see them quite a bit. |
WARNING-this post contains words or thoughts that may at some point be discovered by the state of California to cause cancer.
Member
Joined:
Jun 2022
Posts:
14584
EE: 100% (31)
TX, USA
 PT 92/99 just involved making the slot a bit wider. I did a half dozen in probably 10 minutes and it shows as they are a little rough. They function fine though and you could go slow with a file if appearance bothers you. |
“That’s not how it works. You buy more tools and power than you need and as you fuck everything up you gain the knowledge to become a better carpenter.”
Tveddy
Tveddy
|
A little rough... We can clearly see you are not a WECSOG graduate! There is another certification required for Dremel use. |
So... I find comfort in the fact that if Trump has to work so hard to go to Heaven, then there is a shit load of Democrats that have no f-cking chance to go anywhere but HELL. Sometimes it is entirely appropriate to kill a fly with a sledge-hammer.
Member
Joined:
Jun 2022
Posts:
14585
EE: 100% (31)
TX, USA
|
Originally Posted By DasRonin: A little rough... We can clearly see you are not a WECSOG graduate! There is another certification required for Dremel use. That place was too rich for my blood. I went to Birchwood. Casey  
|
“That’s not how it works. You buy more tools and power than you need and as you fuck everything up you gain the knowledge to become a better carpenter.”
Tveddy
Tveddy
|
Originally Posted By whiskerz: Although I have enough Browning Hi-Power mags has anyone verified they can be made to work? For the most part, non-CZ double stack metal mags are derived from the the Hi power mag. So just stick it in while holding it tight and rack a couple dummy rounds through the pistol. If they feed fine, you just need to mod to fit the mag catch |
"George said "TAX? Fuck that, I THE FUCKING MAN!" Then took a bunch of shots of the whiskey he made himself and shot King George in the goddamned face." -RustedAce
|
https://www.ar15.com/forums/t_5_4/202843_Return-of-the-comprehensive-magazine-compatibility-thread.html Thank you, OP. I will crosslink. |
|
Originally Posted By lightning351: I can say for a fact,that they work in sig 226,I have a dozen ive cut new notches in,and they are 100%. The one I modified for a P226 wouldn't hold the slide back on an empty mag. I had to superglue a little piece of plastic to the follower to build it up a little to push the slide stop up. |
|
I found 3 m9 mags with +2 basepads recently for $10 a mag. Arex zero catches cut Attached File |
"Government is like a baby. An alimentary canal with a big appetite at one end and no sense of responsibility at the other."
Ronald Reagan
Ronald Reagan
|
I learned in Iraq 08’ that M9 and 226 mags are interchangeable and will work if you hold the mag up. Same mag body design just different lockup Later in Afghanistan did modify M9 mags for S&W Sigma and Titas machine pistols (yes select fire). Same cut works in both. First did the measuring thing but later just removed mag catch from pistol, inserted M9 mag and scribed where to cut You can also cut new bottom notch for 92S pistols. Tried the M9 to preB cz75 but no go. Did conversions M9 to Taurus 92 too |
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22-26'
Afghanistan: 09,10,11,14,17,-21'
Iraq: 91,03,04,05,06,08,09,15,16,22-26'
Afghanistan: 09,10,11,14,17,-21'
|
I have nothing to add other than those Checkmate M9-mags are made from some well hardened and heat treated steel. I've used the baseplates for rehabbing HI-Power and older, pre-92F Beretta magazines for years since they're a perfect fit for both. The springs on the earliest Checkmates (pre-2008ish) might leave a little to be desired, but they are durable, very reliable magazines. The later Checkmates are fantastic magazines, especially when they reverted back to and mimicked the old USGI M9 mags as made by Mec-Gar under subcontract for Beretta. |
|
Originally Posted By Combat_Diver: I learned in Iraq 08' that M9 and 226 mags are interchangeable and will work if you hold the mag up. Same mag body design just different lockup Later in Afghanistan did modify M9 mags for S&W Sigma and Titas machine pistols (yes select fire). Same cut works in both. First did the measuring thing but later just removed mag catch from pistol, inserted M9 mag and scribed where to cut. Pictures should be in the compatibliy mag link You can also cut new bottom notch for 92S pistols. Tried the M9 to preB cz75 but no go. Did conversions M9 to Taurus 92 too |
|
Originally Posted By HappyCamel: I've never heard of Titas and Google only shows a US vz61 receiver manufacturer Not Tisas but Girsan Zigana Attached File Attached File Lever below slide stop is selector. Slide mounted safety is the decocker Converted mag Attached File |
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22-26'
Afghanistan: 09,10,11,14,17,-21'
Iraq: 91,03,04,05,06,08,09,15,16,22-26'
Afghanistan: 09,10,11,14,17,-21'
Member
Joined:
Jun 2022
Posts:
14586
EE: 100% (31)
TX, USA
|
Originally Posted By Combat_Diver: I learned in Iraq 08’ that M9 and 226 mags are interchangeable and will work if you hold the mag up. Same mag body design just different lockup Later in Afghanistan did modify M9 mags for S&W Sigma and Titas machine pistols (yes select fire). Same cut works in both. First did the measuring thing but later just removed mag catch from pistol, inserted M9 mag and scribed where to cut You can also cut new bottom notch for 92S pistols. Tried the M9 to preB cz75 but no go. Did conversions M9 to Taurus 92 too Removing the mag catch and marking sounds a lot easier than what I’ve done historically. I will attempt to do so this weekend with one of my High-Powers |
“That’s not how it works. You buy more tools and power than you need and as you fuck everything up you gain the knowledge to become a better carpenter.”
Tveddy
Tveddy
Member
Joined:
Jun 2022
Posts:
14587
EE: 100% (31)
TX, USA
|
Originally Posted By backbencher: https://www.ar15.com/forums/t_5_4/202843_Return-of-the-comprehensive-magazine-compatibility-thread.html Thank you, OP. I will crosslink. Thanks for the link. I had not seen that thread before and there is a great deal of good info in it. |
“That’s not how it works. You buy more tools and power than you need and as you fuck everything up you gain the knowledge to become a better carpenter.”
Tveddy
Tveddy
|
Link me your good deals on beretta m9/92 mags I just bought a M9; havent had one in years |
I wouldn't stand in front of a piss-filled supersoaker. Does that make it a good pistol? - Caboose314
I thought I was covered for 22 cans, but the NFAids is a bitch when it mutates - themagikbullet
I thought I was covered for 22 cans, but the NFAids is a bitch when it mutates - themagikbullet
|
Originally Posted By Curmudgeon762: https://www.ar15.com/media/mediaFiles/563702/image-3832269.jpg Sticks out but works. The full size Arex is spot on. Finding mags for those pistols is what lead me down this rabbit hole. i wonder if a 13rd Beretta 92 Compact mag would be flush fit. those can be found for not too much $$. BerettaUSA has them on sale from time to time. |
I suggest we trade a question mark in for a maybe.
Joined:
Feb 2008
Posts:
51693
EE: 100% (90)
IA, USA
|
Originally Posted By BeaterHonda: Link me your good deals on beretta m9/92 mags I just bought a M9; havent had one in years Go to the EE under handgun magazines. There is a seller who has them priced at $100 for 10. |
WARNING-this post contains words or thoughts that may at some point be discovered by the state of California to cause cancer.
Member
Joined:
Jun 2022
Posts:
14588
EE: 100% (31)
TX, USA
|
Originally Posted By BeaterHonda: Link me your good deals on beretta m9/92 mags I just bought a M9; havent had one in years Individuals selling on EE and Tacswap. Dealers are still asking full price despite all the surplus ones hitting the market. |
“That’s not how it works. You buy more tools and power than you need and as you fuck everything up you gain the knowledge to become a better carpenter.”
Tveddy
Tveddy
Member
Joined:
Jun 2022
Posts:
14589
EE: 100% (31)
TX, USA
|
Originally Posted By MFP_4073: i wonder if a 13rd Beretta 92 Compact mag would be flush fit. those can be found for not too much $$. BerettaUSA has them on sale from time to time. The body is probably the right length but a new slot would still need to be cut and the factory ones are available again for $30 a pop. But I doubt it’s a ocular enough platform that they will be around in the future. |
“That’s not how it works. You buy more tools and power than you need and as you fuck everything up you gain the knowledge to become a better carpenter.”
Tveddy
Tveddy
Member
Joined:
Jun 2022
Posts:
14593
EE: 100% (31)
TX, USA
|
I tried it with a High Power this evening: M9 mag fits snuggly in both my Inglis clones but the single mag I tried was quite tight in my Belgian Browning.I removed the mag catch on an Englis , marked the location, and drilled/cut the slot. It does lock into place on the Inglis clones but extends around an inch past the but of the pistol. Function was not nearly 100% and the slide does not lock back on the last round. It would however, lock on the 5th round with a loaded mag for some reason. Overall, I would consider this a failure as the factory mags fit and function better and are readily available. Zombie Apocalypse and no other options? Sure but I won’t be modifying any more for my High Powers. |
“That’s not how it works. You buy more tools and power than you need and as you fuck everything up you gain the knowledge to become a better carpenter.”
Tveddy
Tveddy
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter