Posted: 6/24/2026 9:46:46 PM EDT
|
Been working with the resin printer lately. Trying a new material, Siraya Tech Blu Nylon Mecha. Can't get anything to stick to the build plate. The recommended settings are 50s for 6 base layers, 2.5s for other layers. I'm up to 70s for 6 base layers, I sand blasted the bed for more tooth, relevelled the bed. Slowed down the lift speed as well. Anyone have any experience with that material or other ideas? |
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
31872
EE: 100% (5)
MN, USA
| I recall there is a film you can apply to the plate that will give better adhesion, but I'll admit it has been a few moons since I was doing resin. |
Once you realize that all power comes from the credible threat of the use of deadly force, and the gov't hates you, most things become easy to understand..
|
Originally Posted By Rat_Patrol: I recall there is a film you can apply to the plate that will give better adhesion, but I'll admit it has been a few moons since I was doing resin. I have not seen that. I have used triflow on the FEP sheet to make the resin stick less. It sort of worked. |