User Panel
User Panel
User Panel
|
Posted: 6/3/2024 9:06:30 PM EDT
[#1]
Quote HistoryOriginally Posted By Emt1581: With a spring and follower....are these actually functional or not so much? Thanks! Quote HistoryOriginally Posted By Emt1581: Originally Posted By bionicmonkey: Decided that since i suck at lego maybe try my hand at Duplo..  https://www.ar15.com/media/mediaFiles/56039/1000003067_jpg-3228138.JPG This is just for initial size and fitment verification so i can make the next ver which will have a follower. Baseplate is on the printer now With a spring and follower....are these actually functional or not so much? Thanks! Well the metal one is stock so yes. The printed is ready for testing with follower and baseplate ready but i am having a time figuring out what to do for the spring. The factory spring is forking huuge - 3/32 thickness and not available to buy anywhere so i am looking at building a spring jig. |
|
|
|
|
Posted: 6/4/2024 10:16:09 PM EDT
[#2]
What I'm calling my final release candidate.
I've ditched the threaded inserts and went with slide in square nuts. This will eliminate pull on the plastic of the threaded inserts, and you don't have to melt in threaded inserts. I went with the inserts before because our son had a thing for licking any metal he could, and the inserts were hidden, but he is largely over that now. If it is a problem, I'll just revert back. I may change it to where you slide the nuts in from the inside instead of from the outside. Actually, now that I say that out loud in my head (  ), I'm going to do that.Added tool access to volume buttons. This is just for hard starting/restarting the tablet when they lock up. Also increased the relief for the volume rocker button as they were being pushed out further and further with the dozens of times these tablets have been taken apart for the screens to be replaced. Increased the deck height by 0.6mm to accommodate the 3rd glass screen saver w/o the bezel pushing on it. Opened up the bezel area by 1mm. Sometimes you have to really get your finger down there for the tablet to recognize you are swiping from bottom of screen. Eliminated the screw by the volume button. Just wasn't enough room in there anymore. Couple other minor changes. Of course, still have the TPU bumpers (not in the image) that go on the corners. Those things are awesome. 
|
|
|
|
|
Posted: 6/5/2024 8:39:45 AM EDT
[#3]
Quote HistoryOriginally Posted By bionicmonkey: Well the metal one is stock so yes. The printed is ready for testing with follower and baseplate ready but i am having a time figuring out what to do for the spring. The factory spring is forking huuge - 3/32 thickness and not available to buy anywhere so i am looking at building a spring jig. Didn't know they didn't sell the parts but it makes sense as EVERYTHING about the Barrett's are proprietary except for the econo-grip. Still haven't decided what is optimal there to swap out. Thanks and please keep us posted!! |
|
|
|
|
Posted: 6/5/2024 10:17:47 AM EDT
[#4]
|
|
|
|
FL, USA
|
Posted: 6/5/2024 11:08:53 AM EDT
[Last Edit: Gage]
[#5]
I printed some welding jigs for a DIY shop stool.
It's similar to a $600 Viper stool but half the cost. Plans, parts list and STLs are free here.  A DIY Shop Stool You Can Build |
|
|
|
Posted: 6/5/2024 6:05:40 PM EDT
[#6]
Quote HistoryOriginally Posted By TribunusSanGeorgii: 7.62x54r loading block pulled off of thingiverse https://www.ar15.com/media/mediaFiles/408270/20240604_181002_jpg-3232682.JPG Are those shoulders dented or is it some trick of the light? |
|
|
|
|
Posted: 6/5/2024 8:00:56 PM EDT
[#7]
Angled Ice Scoop for Countertop Ice Maker
 Attached File Attached File Attached FilePen Cup  Attached File |
|
|
|
|
Posted: 6/5/2024 8:06:20 PM EDT
[#8]
Quote HistoryOriginally Posted By blindprophet501: Angled Ice Scoop for Countertop Ice Maker https://www.ar15.com/media/mediaFiles/518189/image5_jpeg-3233372.JPGhttps://www.ar15.com/media/mediaFiles/518189/image6_jpeg-3233373.JPGhttps://www.ar15.com/media/mediaFiles/518189/image4_jpeg-3233375.JPG Pen Cup https://www.ar15.com/media/mediaFiles/518189/vader_jpeg-3233376.JPG I love simplish, practical designs. Ice scoop your design or? |
|
|
|
|
Posted: 6/5/2024 8:06:54 PM EDT
[Last Edit: blindprophet501]
[#9]
|
|
|
|
|
Posted: 6/5/2024 8:08:28 PM EDT
[Last Edit: blindprophet501]
[#10]
Quote HistoryOriginally Posted By -Obsessed-: Quote HistoryOriginally Posted By -Obsessed-: Originally Posted By blindprophet501: Angled Ice Scoop for Countertop Ice Maker https://www.ar15.com/media/mediaFiles/518189/image5_jpeg-3233372.JPGhttps://www.ar15.com/media/mediaFiles/518189/image6_jpeg-3233373.JPGhttps://www.ar15.com/media/mediaFiles/518189/image4_jpeg-3233375.JPG Pen Cup https://www.ar15.com/media/mediaFiles/518189/vader_jpeg-3233376.JPG I love simplish, practical designs. Ice scoop your design or? lol no it was from thingiverse https://www.thingiverse.com/thing:6124021 |
|
|
|
|
Posted: 6/5/2024 8:30:44 PM EDT
[#11]
Quote HistoryOriginally Posted By SecretSquirell: Are those shoulders dented or is it some trick of the light? Quote HistoryOriginally Posted By SecretSquirell: Originally Posted By TribunusSanGeorgii: 7.62x54r loading block pulled off of thingiverse https://www.ar15.com/media/mediaFiles/408270/20240604_181002_jpg-3232682.JPG Are those shoulders dented or is it some trick of the light? Dented. Too much lube and/or tumbling media stuck in the die. |
|
|
|
|
Posted: 6/5/2024 10:09:58 PM EDT
[#12]
Hydra Pro
 Attached FileTo fit larger atomic filament spools in my ams. This should allow the over-full spools to turn and not bind on the feeder.  Attached FileThe rest of the parts are still printing. |
|
|
|
|
Posted: 6/5/2024 10:10:53 PM EDT
[#13]
|
|
|
|
|
Posted: 6/6/2024 9:23:45 AM EDT
[Last Edit: nikdfish]
[#14]
|
|
|
|
|
Posted: 6/6/2024 11:19:11 AM EDT
[#15]
Quote HistoryOriginally Posted By Tholo: Belt tension gage for voron assembly Pf makes design https://www.ar15.com/media/mediaFiles/246073/20240605_210326_jpg-3233494.JPG Let us know how well it works for you. Thinking of getting one for the RatRig for initial setup as it has great belt tuning software in RatOs. |
|
|
|
|
Posted: 6/6/2024 7:59:55 PM EDT
[#16]
Quote HistoryOriginally Posted By nikdfish: This is on the printer currently for the wife's new Durango https://www.ar15.com/media/mediaFiles/128622/License_Plate_Frame_v3_b_jpg-3233770.JPG finished ... https://www.ar15.com/media/mediaFiles/128622/PXL_20240606_153230629-edit_jpg-3233908.JPG |
|
|
|
|
Posted: 6/6/2024 8:04:32 PM EDT
[#17]
Quote HistoryOriginally Posted By nikdfish: This is on the printer currently for the wife's new Durango https://www.ar15.com/media/mediaFiles/128622/License_Plate_Frame_v3_b_jpg-3233770.JPG finished ... https://www.ar15.com/media/mediaFiles/128622/PXL_20240606_153230629-edit_jpg-3233908.JPG Ya weren't realllllly the first in flight though. Y'all just happened to have a flat field. 
|
|
|
|
|
Posted: 6/6/2024 8:45:13 PM EDT
[#18]
Quote HistoryOriginally Posted By -Obsessed-: Ya weren't realllllly the first in flight though. Y'all just happened to have a flat field. Having grown up in Ohio, NC plates always made me 
|
|
|
|
|
Posted: 6/6/2024 8:46:57 PM EDT
[#19]
Quote HistoryOriginally Posted By AFCarbon15: Having grown up in Ohio, NC plates always made me Maybe Ohio should just say "First on the Moon." Hard to top that!
|
|
|
|
|
Posted: 6/7/2024 12:48:08 PM EDT
[Last Edit: nikdfish]
[#20]
Finished printing this the other day. Just finished assembly. A large format wind spinner, individual sails use most of the Qidi xmax3 build plate. Printed in ASA.
 Attached File Attached File Attached File Attached File Attached File Large format printed 10 blade wind spinner  Large format printed 10 blade wind spinner The tape on the sails are clipped sections of reflective red/white DOT marking tape (red on red sails, white on white sails). Source & files on Printables. https://www.printables.com/model/905426-single-fan-10-sail-spinner |
|
|
|
|
Posted: 6/15/2024 4:03:50 PM EDT
[#21]
|
|
|
|
|
Posted: 6/17/2024 10:46:01 AM EDT
[#22]
The wife wanted to install a bluebird house on a 3.75" round fence post. I printed up some mounting blocks so the house couldn't rock on the curved surface. The head of the top screw fits into the "T" slot of the top mount. The bottom screw passes through the center hole of the bottom mount. Same model used in both positions.
 Attached File Attached File Attached FilePrinted in ASA. Copy placed on printables. https://www.printables.com/model/914305-birdhouse-mount-for-3-34-post |
|
|
|
|
Posted: 6/17/2024 1:46:08 PM EDT
[#23]
|
|
|
|
|
Posted: 6/17/2024 2:10:01 PM EDT
[#24]
Nice!
|
|
|
|
|
Posted: 6/17/2024 6:34:31 PM EDT
[#25]
Quote HistoryOriginally Posted By bionicmonkey: https://www.ar15.com/media/mediaFiles/56039/1000003114_jpg-3243816.JPG That looks great! All of the files I've found contain 3 parts for the main grip and stock. Did you merge the 3 parts or is there a file out there for a single part? |
|
|
|
|
Posted: 6/17/2024 7:02:15 PM EDT
[#26]
 Need to pick up hardware before install and testing.  Need to learn modeling to integrate a ring mount between the two parts, so they can be printed in one go. |
|
|
|
|
Posted: 6/17/2024 7:25:55 PM EDT
[#27]
Quote HistoryOriginally Posted By HillaryClinton: That looks great! All of the files I've found contain 3 parts for the main grip and stock. Did you merge the 3 parts or is there a file out there for a single part? yeah this is a mash up of an older design which was a 2 part, put back together but then the locking mechanism for that was shit, so I brought in a major revision to the stock system and built my own locking mechanism for the stock. Also I modified the grip mounting block to have a better slide mechanism and created the ability to have a bolt on side plate - which turned out to be unnecessary. Then just modified everything to be able to print with no supports and voila. the whole triangle bottom support thing is not really necessary for the function of the thing but i would have had to put something there to support the grip so why not just keep it. overall its way overbuilt but slides smoothly with no flex. |
|
|
|
|
Posted: 6/17/2024 8:00:04 PM EDT
[Last Edit: jollyrodger]
[#28]
There's a thread way back in 2017. Some little device. Just about took me all day to find it.
https://www.ar15.com/forums/General/-ARCHIVED-THREAD-Bumpfire-Gadget-New-link-hurry-up-/5-2039465/?page=14 |
|
|
|
|
Posted: 6/17/2024 9:04:18 PM EDT
[#29]
New upper for the first FGC9 I made. It rapidly self disassembled this weekend at a shoot during a suppressed mag dump.
|
|
|
|
|
Posted: 6/18/2024 9:22:51 AM EDT
[Last Edit: Rat_Patrol]
[#30]
Quote HistoryOriginally Posted By jollyrodger: There's a thread way back in 2017. Some little device. Just about took me all day to find it. https://www.ar15.com/forums/General/-ARCHIVED-THREAD-Bumpfire-Gadget-New-link-hurry-up-/5-2039465/?page=14 The model is still on my printables page iirc ETA: yup https://www.printables.com/model/96529-minimalist-thing |
|
|
|
AL, USA
|
Posted: 6/18/2024 7:38:40 PM EDT
[#31]
Quote HistoryOriginally Posted By SandHillsHillbilly: Let us know how well it works for you. Thinking of getting one for the RatRig for initial setup as it has great belt tuning software in RatOs. Quote HistoryOriginally Posted By SandHillsHillbilly: Originally Posted By Tholo: Belt tension gage for voron assembly Pf makes design https://www.ar15.com/media/mediaFiles/246073/20240605_210326_jpg-3233494.JPG Let us know how well it works for you. Thinking of getting one for the RatRig for initial setup as it has great belt tuning software in RatOs. I like the one I put together. Turns out I was pretty close to where I wanted to be on two different printers. |
|
|
|
Posted: 6/18/2024 9:44:27 PM EDT
[#32]
I printed some parts in ASA to mod my Thumbler's Tumbler Model B to use real bearings instead of plastic bushings.
 Attached File Attached File Attached FileThe models and BOM are on Printables, although I just made this today - no idea how it will hold up in the long term. My original design required drilling holes in sheet metal but it for sure would have been stronger. Hoping this one will be strong enough. |
|
|
|
|
Posted: 6/20/2024 1:05:15 PM EDT
[#33]
Some replacement trimmer spool caps for a Worx battery string trimmer. The caps wear eventually wear out (or get lost) & need replacement.
 Attached File Attached File Attached FileI placed STL & F360 source files on printables. https://www.printables.com/model/918300-worx-string-trimmer-spool-cap |
|
|
|
|
Posted: 6/20/2024 3:18:41 PM EDT
[#34]
Working on my temporary office trailer while our housing situation is fluid for a while. Just imagine a bench with 3D Printers on it where the stack of boxes are
|
|
|
|
|
Posted: 6/22/2024 7:17:12 PM EDT
[#35]
Custom Pokémon deck boxes.
|
|
|
|
USA
|
Posted: 6/24/2024 9:50:35 AM EDT
[#36]
Just got an Ender 3 V3 KE.
First Benchy  A whistle  It prints the pea inside and you have to break it loose.  One of the reasons I bought the printer was to print hard to find parts for an older camper I have. Here is a test print in PLA of the corner cap. I will print the part in PETG prime and paint before putting on the camper. Overall I am pleased with how it came out but there are a few defects. I suspect most are from vibration as I had this on the dining room table. Printed in Normal .2 I could print it in High Quality but not sure it is worth the extra time as these are good enough.   Close up of defects  |
|
|
|
Posted: 6/24/2024 11:03:12 AM EDT
[#37]
The machine doesn't care if the table is shaky.
|
|
|
|
|
Posted: 6/25/2024 10:25:32 AM EDT
[#38]
Did a few more oxygen tank keys. My wife often transports her sister, who requires supplemental oxygen. Extras are handy.
 Attached File Attached FileOn printables. https://www.printables.com/model/923469-oxygen-tank-wrench |
|
|
|
|
Posted: 6/25/2024 10:53:42 AM EDT
[#39]
Quote HistoryOriginally Posted By nikdfish: Did a few more oxygen tank keys. My wife often transports her sister, who requires supplemental oxygen. Extras are handy. https://www.ar15.com/media/mediaFiles/128622/oxy-wrench_v2_v3_jpg-3250236.JPG https://www.ar15.com/media/mediaFiles/128622/PXL_20240625_140843233b_jpg-3250237.JPG On printables. https://www.printables.com/model/923469-oxygen-tank-wrench Thank you these will come in very handy. |
|
|
|
IN, USA
|
Posted: 6/25/2024 8:21:41 PM EDT
[#40]
A Swole Charmander for the grandson
Swole Charmander on Thingivers |
|
|
|
Posted: 6/29/2024 8:44:34 PM EDT
[#41]
My oldest is gone for the week, so I'm taking over his bedroom to print up the latest gen tablet cases for my 10yo.
|
|
|
|
|
Posted: 7/2/2024 11:24:22 AM EDT
[Last Edit: nikdfish]
[#42]
Printed earlier, but only recently tested. A replacement Worx string trimmer spool.
 Attached File Attached File Attached FileOriginal, canvas used for setting up layout:  Attached FileNow on Printables: https://www.printables.com/model/930493-worx-string-trimmer-string-spool |
|
|
|
|
Posted: 7/2/2024 10:01:08 PM EDT
[#43]
Cranking on a DB9 alloy.
|
|
|
|
|
Posted: 7/4/2024 5:36:47 PM EDT
[Last Edit: bradbn4]
[#44]
I printed this item because it was the perfect size
for my small temp temp / humidity sensor. The stand printed was printed with PLA, no supports / etc. The device is billed as a tablet stand, but works with lcd clock/temp sensor, and fits well with a Nexus class phone. Design is easel style and adjust from almost flat to nearly 90 degrees. I used the stand for phone, amazon fire HD with zero issues. As soon as my phone finishes updating 40 days+ of patches I will add a real photo. https://www.printables.com/model/376433-tablet-stand  Attached File Attached File |
|
|
|
|
Posted: 7/5/2024 12:36:20 AM EDT
[#45]
I didn't think to get a picture of them earlier, but I printed a ton of these little firework fuse connectors that I drew up in TinkerCad. Just a 15mm tube with a slash cut through one side. Just big enough to hold two fireworks fuses together for joining mortars and boxes. Worked like a charm with standard 3mm visco fuse.
 Attached File |
|
|
|
|
Posted: 7/5/2024 2:53:20 PM EDT
[Last Edit: nikdfish]
[#46]
Printed the parts from flash forge to add enclosure components to the 5M. Will add the pre-cut plexy panels from the enclosure accessory kit they sell. Still haven't unboxed the 5M but probably will pretty soon. Will be disassembling the E3 & lack enclosure to make room for it.
|
|
|
|
|
Posted: 7/5/2024 3:25:36 PM EDT
[Last Edit: Firestarter123]
[#47]
I finally have all of the dimensions perfect for the heat set inserts and as well as the 1/4-20 adapter on the bottom for tripod mounting.
|
|
|
|
|
Posted: 7/5/2024 6:21:51 PM EDT
[#48]
Quote HistoryOriginally Posted By Firestarter123: I finally have all of the dimensions perfect for the heat set inserts and as well as the 1/4-20 adapter on the bottom for tripod mounting. https://nextcloud.fstech.ltd/s/rBr9sjFnTELNtAz/preview https://nextcloud.fstech.ltd/s/TdR9qw9KBFDLnaE/preview Got a link to that? Have wanted one of those but wouldn't use it enough to justify the cost. |
|
|
|
|
Posted: 7/5/2024 10:37:00 PM EDT
[#49]
 Chairmanwon 19x. |
|
|
|
|
Posted: 7/7/2024 9:33:03 AM EDT
[Last Edit: nikdfish]
[#50]
Did a tripod base for a portable vertical antenna. 1/2" EMT conduit is used for the legs and are a slip fit. SO-239 on the bottom, 3/8-24 threaded hole on the top. Assembly done with M3 caphead screws and M4 caphead screws w/ nuts
 Attached File Attached File Attached File Attached FileSource & files on printables: https://www.printables.com/model/934873-antenna-tripod-with-emt-legs |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
Attached File
Attached File
Attached File
Attached File
Attached File
Attached File
Attached File
Attached File
