User Panel
Quoted: The shorter barrel should allow for a slightly lighter bolt than normal. If the bolt is still too light though it shouldn't be a problem to drill a few holes in it and fill them with tungsten. View Quote I wouldn't lighten a Marlin Camp bolt by a grain. Adding tungsten or lead would be ideal. |
|
Quoted: I wouldn't lighten a Marlin Camp bolt by a grain. Adding tungsten or lead would be ideal. View Quote View All Quotes View All Quotes Quoted: Quoted: The shorter barrel should allow for a slightly lighter bolt than normal. If the bolt is still too light though it shouldn't be a problem to drill a few holes in it and fill them with tungsten. I wouldn't lighten a Marlin Camp bolt by a grain. Adding tungsten or lead would be ideal. I'm not saying to lighten it, I'm saying the shorter barrel should work better with the stock bolt than the 16" barrel does. |
|
Quoted: I'm not saying to lighten it, I'm saying the shorter barrel should work better with the stock bolt than the 16" barrel does. View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: The shorter barrel should allow for a slightly lighter bolt than normal. If the bolt is still too light though it shouldn't be a problem to drill a few holes in it and fill them with tungsten. I wouldn't lighten a Marlin Camp bolt by a grain. Adding tungsten or lead would be ideal. I'm not saying to lighten it, I'm saying the shorter barrel should work better with the stock bolt than the 16" barrel does. Agreed. |
|
Quoted: Without optics, longer sight radius is more accurate. OP is using optics. What grn loads do you plan to use & at what range, OP? If 124 or 115, barrel length and the transonic range come into play. View Quote Same Federal 147gr I use in the X-Five. I was thinking about avoiding the transonic issue too. Quoted: I might wait until I firmed up the pistol grip idea, or at least start with a lot longer barrel than you think you want. The visual integration and aesthetic you end up going for will dictate barrel length more than any practical consideration. Your first approximation reminds of a Ruger charger in a laminated stock https://www.americanrifleman.org/media/va3c2h1j/charger_007_rcpa_boyds_adapttac_01s.jpg https://assets.basspro.com/image/upload/c_limit,dpr_2.0,f_auto,h_100,q_auto,w_100/c_limit,h_100,w_100/v1/ProductImages/450/usedgun_101424711_main?pgw=1 View Quote Certainly fair! Both shortening the barrel and forming the pistol grip will be taken care of at roughly the same time so aesthetics can be taken into consideration then |
|
Quoted: Same Federal 147gr I use in the X-Five. I was thinking about avoiding the transonic issue too. View Quote View All Quotes View All Quotes Quoted: Quoted: Without optics, longer sight radius is more accurate. OP is using optics. What grn loads do you plan to use & at what range, OP? If 124 or 115, barrel length and the transonic range come into play. Same Federal 147gr I use in the X-Five. I was thinking about avoiding the transonic issue too. Solves that problem. Threading for a can? |
|
Quoted: Solves that problem. Threading for a can? View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: Without optics, longer sight radius is more accurate. OP is using optics. What grn loads do you plan to use & at what range, OP? If 124 or 115, barrel length and the transonic range come into play. Same Federal 147gr I use in the X-Five. I was thinking about avoiding the transonic issue too. Solves that problem. Threading for a can? Eh probably not. I considered threading for a compensator but I think just a crowned barrel will work for my purposes |
|
Quoted: Eh case hardening is something I’m gonna save for the revolver projects. This is gonna be a little more colorful/playful. I’ve been looking at laminated wood blocks for grips, and I really like some of the two-color options here: https://www.cwp-usa.com/collections/spectraply-panels?page=1 Maybe the orange and black? It’d be MCR colors and in line with another The Expanse theme, and this will certainly wind up looking very spacegun-ish… https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcR7H_vFKdD6QIhs0wekFXrsN1H2KcbhRoIMFeTgzhdbmA&s https://globeflags.com/cdn/shop/products/H6d3899cbb03c4eed8272817f2cbd1530i_1080x.jpg?v=1647891123 View Quote MCRN Marlin Camp Rifle Neutered |
|
Quoted: Quoted: Eh case hardening is something I’m gonna save for the revolver projects. This is gonna be a little more colorful/playful. I’ve been looking at laminated wood blocks for grips, and I really like some of the two-color options here: https://www.cwp-usa.com/collections/spectraply-panels?page=1 Maybe the orange and black? It’d be MCR colors and in line with another The Expanse theme, and this will certainly wind up looking very spacegun-ish… https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcR7H_vFKdD6QIhs0wekFXrsN1H2KcbhRoIMFeTgzhdbmA&s https://globeflags.com/cdn/shop/products/H6d3899cbb03c4eed8272817f2cbd1530i_1080x.jpg?v=1647891123 MCRN Marlin Camp Rifle Neutered HA Not bad but I think I’m gonna stick with Martini |
|
Quoted: Eh probably not. I considered threading for a compensator but I think just a crowned barrel will work for my purposes View Quote I could be wrong, but wouldn't a can also increase back-pressure on the bolt? So if designed for no can, then added one, the bolt may be too light. Just something to consider. Not sure how much "wiggle" this will have to compensate for the difference. |
|
Quoted: I could be wrong, but wouldn't a can also increase back-pressure on the bolt? So if designed for no can, then added one, the bolt may be too light. Just something to consider. Not sure how much "wiggle" this will have to compensate for the difference. View Quote View All Quotes View All Quotes Quoted: Quoted: Eh probably not. I considered threading for a compensator but I think just a crowned barrel will work for my purposes I could be wrong, but wouldn't a can also increase back-pressure on the bolt? So if designed for no can, then added one, the bolt may be too light. Just something to consider. Not sure how much "wiggle" this will have to compensate for the difference. The bolt's too light already. In my brother's experience, the Camp 9 does not suppress well. Threading does allow things like linear comps & flash cans though. |
|
The current plan is to leave the shortened barrel unthreaded with a target crown. If the felt recoil is still a bit much to handle, I’ll have them thread it and put a comp/brake on to help tame it a bit further, but I don’t imagine that will be required. I don’t mind if the recoil is fairly sharp, as long as it’s mostly linear with minimal muzzle rise
|
|
Quoted: The current plan is to leave the shortened barrel unthreaded with a target crown. If the felt recoil is still a bit much to handle, I’ll have them thread it and put a comp/brake on to help tame it a bit further, but I don’t imagine that will be required. I don’t mind if the recoil is fairly sharp, as long as it’s mostly linear with minimal muzzle rise View Quote Drilling the top of the bolt & filling w/ lead in the holes might help. |
|
Quoted: Drilling the top of the bolt & filling w/ lead in the holes might help. View Quote View All Quotes View All Quotes Quoted: Quoted: The current plan is to leave the shortened barrel unthreaded with a target crown. If the felt recoil is still a bit much to handle, I’ll have them thread it and put a comp/brake on to help tame it a bit further, but I don’t imagine that will be required. I don’t mind if the recoil is fairly sharp, as long as it’s mostly linear with minimal muzzle rise Drilling the top of the bolt & filling w/ lead in the holes might help. I’ll certainly talk with my gunsmith about it! It’ll probably be an “if needed” kind of thing like a compensator though |
|
Quoted: I’ll certainly talk with my gunsmith about it! It’ll probably be an “if needed” kind of thing like a compensator though View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: The current plan is to leave the shortened barrel unthreaded with a target crown. If the felt recoil is still a bit much to handle, I’ll have them thread it and put a comp/brake on to help tame it a bit further, but I don’t imagine that will be required. I don’t mind if the recoil is fairly sharp, as long as it’s mostly linear with minimal muzzle rise Drilling the top of the bolt & filling w/ lead in the holes might help. I’ll certainly talk with my gunsmith about it! It’ll probably be an “if needed” kind of thing like a compensator though Wanted to do that w/ a CMR-30 to get it to run 30 grn reliably. |
|
|
You really need a direct mount pistol optic. For a rifle, that looks fine. For the pistol you're building, that a lot of unnecessary height over bore.
|
|
A 509T mounting plate bolted directly to the receiver would probably be the cleanest look. The receiver doesn't look like it has enough meat to cut it directly.
ETA: I'd see if your smith can cut the receiver for the Arisaka offset optics plates. |
|
Quoted: A 509T mounting plate bolted directly to the receiver would probably be the cleanest look. The receiver doesn't look like it has enough meat to cut it directly. ETA: I'd see if your smith can cut the receiver for the Arisaka offset optics plates. View Quote Or just drill the receiver directly to mount the optic? Wouldn't have any recoil lugs, but the receiver isn't moving like a slide. |
|
Quoted: Or just drill the receiver directly to mount the optic? Wouldn't have any recoil lugs, but the receiver isn't moving like a slide. View Quote View All Quotes View All Quotes Quoted: Quoted: A 509T mounting plate bolted directly to the receiver would probably be the cleanest look. The receiver doesn't look like it has enough meat to cut it directly. ETA: I'd see if your smith can cut the receiver for the Arisaka offset optics plates. Or just drill the receiver directly to mount the optic? Wouldn't have any recoil lugs, but the receiver isn't moving like a slide. |
|
Quoted: The optic he's using doesn't work that way, it uses a clamp instead of bolting down. And there's still movement from recoil, even if it's not as violent as a slide reciprocating, it's still more force than should be contained by only two screws. View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: A 509T mounting plate bolted directly to the receiver would probably be the cleanest look. The receiver doesn't look like it has enough meat to cut it directly. ETA: I'd see if your smith can cut the receiver for the Arisaka offset optics plates. Or just drill the receiver directly to mount the optic? Wouldn't have any recoil lugs, but the receiver isn't moving like a slide. The optic he's using doesn't work that way, it uses a clamp instead of bolting down. And there's still movement from recoil, even if it's not as violent as a slide reciprocating, it's still more force than should be contained by only two screws. The Picatinny mount he's using now is only held to the receiver with a few screws. |
|
Quoted: The Picatinny mount he's using now is only held to the receiver with a few screws. View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: Quoted: A 509T mounting plate bolted directly to the receiver would probably be the cleanest look. The receiver doesn't look like it has enough meat to cut it directly. ETA: I'd see if your smith can cut the receiver for the Arisaka offset optics plates. Or just drill the receiver directly to mount the optic? Wouldn't have any recoil lugs, but the receiver isn't moving like a slide. The optic he's using doesn't work that way, it uses a clamp instead of bolting down. And there's still movement from recoil, even if it's not as violent as a slide reciprocating, it's still more force than should be contained by only two screws. The Picatinny mount he's using now is only held to the receiver with a few screws. Four, but this is a fair point. I’ll see if I can find a more direct-mount option that can be accommodated |
|
Quoted: I’m waiting a bit longer to take the Marlin to my gunsmith. After a bit of indecision I decided to purchase a used factory grip from a Benelli MP95E pistol: https://www.imfdb.org/images/4/4a/Benelli_MP95E_Chromed.jpg These grips are unique among the factory target pistols in that they’re ambidextrous in the manner that I want the grip for my pistol to be. My thinking is not to utilize the actual Benelli grip on the Marlin via some means of extensive modification, but to use it as a starting point of comparison with my gunsmith as to what I want the Marlin’s grip to look like and feel like, how large it should be, grip angle, etc. That grip should be here this weekend. I also imagine once I’m done with it I should be able to sell it again for basically the same amount I paid for it and re-coup some of the cost View Quote You're paying a $200 tax stamp & chopping the barrel on an out of production $1k rifle, and NOW you're wanting to recoup costs? |
|
Quoted: You're paying a $200 tax stamp & chopping the barrel on an out of production $1k rifle, and NOW you're wanting to recoup costs? View Quote View All Quotes View All Quotes Quoted: Quoted: I’m waiting a bit longer to take the Marlin to my gunsmith. After a bit of indecision I decided to purchase a used factory grip from a Benelli MP95E pistol: https://www.imfdb.org/images/4/4a/Benelli_MP95E_Chromed.jpg These grips are unique among the factory target pistols in that they’re ambidextrous in the manner that I want the grip for my pistol to be. My thinking is not to utilize the actual Benelli grip on the Marlin via some means of extensive modification, but to use it as a starting point of comparison with my gunsmith as to what I want the Marlin’s grip to look like and feel like, how large it should be, grip angle, etc. That grip should be here this weekend. I also imagine once I’m done with it I should be able to sell it again for basically the same amount I paid for it and re-coup some of the cost You're paying a $200 tax stamp & chopping the barrel on an out of production $1k rifle, and NOW you're wanting to recoup costs? If I were actually using the grip it wouldn’t bother me at all, but in this case I just paid nearly $300 for what amounts to a visual aid that I have no other use for |
|
Quoted: If I were actually using the grip it wouldn’t bother me at all, but in this case I just paid nearly $300 for what amounts to a visual aid that I have no other use for View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: I’m waiting a bit longer to take the Marlin to my gunsmith. After a bit of indecision I decided to purchase a used factory grip from a Benelli MP95E pistol: https://www.imfdb.org/images/4/4a/Benelli_MP95E_Chromed.jpg These grips are unique among the factory target pistols in that they’re ambidextrous in the manner that I want the grip for my pistol to be. My thinking is not to utilize the actual Benelli grip on the Marlin via some means of extensive modification, but to use it as a starting point of comparison with my gunsmith as to what I want the Marlin’s grip to look like and feel like, how large it should be, grip angle, etc. That grip should be here this weekend. I also imagine once I’m done with it I should be able to sell it again for basically the same amount I paid for it and re-coup some of the cost You're paying a $200 tax stamp & chopping the barrel on an out of production $1k rifle, and NOW you're wanting to recoup costs? If I were actually using the grip it wouldn’t bother me at all, but in this case I just paid nearly $300 for what amounts to a visual aid that I have no other use for Clearly you now need a Benelli MP95E. |
|
Quoted: Quoted: Quoted: Quoted: I’m waiting a bit longer to take the Marlin to my gunsmith. After a bit of indecision I decided to purchase a used factory grip from a Benelli MP95E pistol: https://www.imfdb.org/images/4/4a/Benelli_MP95E_Chromed.jpg These grips are unique among the factory target pistols in that they’re ambidextrous in the manner that I want the grip for my pistol to be. My thinking is not to utilize the actual Benelli grip on the Marlin via some means of extensive modification, but to use it as a starting point of comparison with my gunsmith as to what I want the Marlin’s grip to look like and feel like, how large it should be, grip angle, etc. That grip should be here this weekend. I also imagine once I’m done with it I should be able to sell it again for basically the same amount I paid for it and re-coup some of the cost You're paying a $200 tax stamp & chopping the barrel on an out of production $1k rifle, and NOW you're wanting to recoup costs? If I were actually using the grip it wouldn’t bother me at all, but in this case I just paid nearly $300 for what amounts to a visual aid that I have no other use for Clearly you now need a Benelli MP95E. I actually serious considered that for a while when I was first researching these things. Even found a decent used one for sale. Just couldn’t bring myself to pay that much money for a .22. I’m certain each of the guns from Pardini, Walther, Benelli, etc are more than worth the asking price. Just not something I can justify dropping that much money on when I’d rather spend the same amount to build my own version exactly as I want it |
|
Quoted: I actually serious considered that for a while when I was first researching these things. Even found a decent used one for sale. Just couldn’t bring myself to pay that much money for a .22. I’m certain each of the guns from Pardini, Walther, Benelli, etc are more than worth the asking price. Just not something I can justify dropping that much money on when I’d rather spend the same amount to build my own version exactly as I want it View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: Quoted: Quoted: I’m waiting a bit longer to take the Marlin to my gunsmith. After a bit of indecision I decided to purchase a used factory grip from a Benelli MP95E pistol: https://www.imfdb.org/images/4/4a/Benelli_MP95E_Chromed.jpg These grips are unique among the factory target pistols in that they’re ambidextrous in the manner that I want the grip for my pistol to be. My thinking is not to utilize the actual Benelli grip on the Marlin via some means of extensive modification, but to use it as a starting point of comparison with my gunsmith as to what I want the Marlin’s grip to look like and feel like, how large it should be, grip angle, etc. That grip should be here this weekend. I also imagine once I’m done with it I should be able to sell it again for basically the same amount I paid for it and re-coup some of the cost You're paying a $200 tax stamp & chopping the barrel on an out of production $1k rifle, and NOW you're wanting to recoup costs? If I were actually using the grip it wouldn’t bother me at all, but in this case I just paid nearly $300 for what amounts to a visual aid that I have no other use for Clearly you now need a Benelli MP95E. I actually serious considered that for a while when I was first researching these things. Even found a decent used one for sale. Just couldn’t bring myself to pay that much money for a .22. I’m certain each of the guns from Pardini, Walther, Benelli, etc are more than worth the asking price. Just not something I can justify dropping that much money on when I’d rather spend the same amount to build my own version exactly as I want it Was discussing with my brother last night about his Pardini & Benelli, watched a couple of videos on the Benelli lever delay 9mm pistol. What's your plan to improve the trigger on the Marlin? Would be very interesting when you're done to compare the recoil between your Martini and a Yeet Cannon - both have drums available! |
|
Quoted: Was discussing with my brother last night about his Pardini & Benelli, watched a couple of videos on the Benelli lever delay 9mm pistol. What's your plan to improve the trigger on the Marlin? Would be very interesting when you're done to compare the recoil between your Martini and a Yeet Cannon - both have drums available! View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: Quoted: Quoted: Quoted: I’m waiting a bit longer to take the Marlin to my gunsmith. After a bit of indecision I decided to purchase a used factory grip from a Benelli MP95E pistol: https://www.imfdb.org/images/4/4a/Benelli_MP95E_Chromed.jpg These grips are unique among the factory target pistols in that they’re ambidextrous in the manner that I want the grip for my pistol to be. My thinking is not to utilize the actual Benelli grip on the Marlin via some means of extensive modification, but to use it as a starting point of comparison with my gunsmith as to what I want the Marlin’s grip to look like and feel like, how large it should be, grip angle, etc. That grip should be here this weekend. I also imagine once I’m done with it I should be able to sell it again for basically the same amount I paid for it and re-coup some of the cost You're paying a $200 tax stamp & chopping the barrel on an out of production $1k rifle, and NOW you're wanting to recoup costs? If I were actually using the grip it wouldn’t bother me at all, but in this case I just paid nearly $300 for what amounts to a visual aid that I have no other use for Clearly you now need a Benelli MP95E. I actually serious considered that for a while when I was first researching these things. Even found a decent used one for sale. Just couldn’t bring myself to pay that much money for a .22. I’m certain each of the guns from Pardini, Walther, Benelli, etc are more than worth the asking price. Just not something I can justify dropping that much money on when I’d rather spend the same amount to build my own version exactly as I want it Was discussing with my brother last night about his Pardini & Benelli, watched a couple of videos on the Benelli lever delay 9mm pistol. What's your plan to improve the trigger on the Marlin? Would be very interesting when you're done to compare the recoil between your Martini and a Yeet Cannon - both have drums available! What Pardini and Benelli guns does your brother have? Target pistols? For what it is it’s honestly a surprisingly good trigger. No slop or side to side movement, just a couple millimeters of take-up before the wall and then the proverbial breaking glass rod. No grit, creep, mush, or anything else. As far as the crispness in isolation, I’d say it even rivals the X-Five. It’s just heavy, about 7ish pounds by feel. I know one thing that can be done is disabling/removing the magazine disconnect safety. It reportedly drops the pull weight by a couple pounds, and it’s just something I don’t need or want on the gun. After that I’ll have to see if anyone offers lightened trigger springs for the platform. I haven’t put much effort into looking into it yet |
|
Quoted: Holy hell you guys https://www.ar15.com/media/mediaFiles/414849/IMG_9358-3204785.jpg This is, by orders of magnitude, the most comfortable pistol grip I’ve ever had in my hand. The right size, right shape, right texture, everything. I think getting one of these as an example piece was the right move. Here’s the grip mocked up on the Marlin receiver for a sense of what it will end up looking like: https://www.ar15.com/media/mediaFiles/414849/IMG_9352-3204786.jpg The beavertail will be a bit higher, and the wood will likely extend forward along the sides of the receiver and out under the barrel for aesthetics, but that’ll pretty much be it. Tomorrow I’ll take this stuff in to see my gunsmith and see what he thinks, then we’ll go from there! View Quote Okay... I am now very interested in seeing where this goes. |
|
One thing you could do right now is take the riser off your red dot mount.
That grip really looks good. |
|
|
|
Quoted: As November5 mentioned, it’s not a riser. Or at least it’s the lowest possible riser one can use while mounting to a picatinny rail View Quote View All Quotes View All Quotes Quoted: Quoted: One thing you could do right now is take the riser off your red dot mount. That grip really looks good. As November5 mentioned, it’s not a riser. Or at least it’s the lowest possible riser one can use while mounting to a picatinny rail Oh, bugger. Just mounted a Romeo to my Sinister's Cx4, & it came w/ a lower mount in the box. It'll work fine, it's just unnecessary height over bore. |
|
Quoted: Oh, bugger. Just mounted a Romeo to my Sinister's Cx4, & it came w/ a lower mount in the box. It'll work fine, it's just unnecessary height over bore. View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: One thing you could do right now is take the riser off your red dot mount. That grip really looks good. As November5 mentioned, it’s not a riser. Or at least it’s the lowest possible riser one can use while mounting to a picatinny rail Oh, bugger. Just mounted a Romeo to my Sinister's Cx4, & it came w/ a lower mount in the box. It'll work fine, it's just unnecessary height over bore. I’m certainly still open to the possibility of changing it! Right now I’m just more focused on getting the grip/stock sorted out and making it a truly functional pistol before fine-tweaking and finalizing the optic setup |
|
The Marlin is in the capable hands of my ‘smith. He’s worked on target pistols before including Hammerli and Pardini examples, so he’s well familiar with the style and feel we’re going for
Current plan of attack is to approach the build in stages - stage one, getting the grip/stock sorted. Stage two will be SBRing and cutting the barrel down to pistol length. When he gets back from vacation in a couple weeks he’ll really dive into it and start drafting some ideas for the grip, getting the aesthetics and ergonomics dialed in. More to come! |
|
Quoted: The Marlin is in the capable hands of my 'smith. He's worked on target pistols before including Hammerli and Pardini examples, so he's well familiar with the style and feel we're going for Current plan of attack is to approach the build in stages - stage one, getting the grip/stock sorted. Stage two will be SBRing and cutting the barrel down to pistol length. When he gets back from vacation in a couple weeks he'll really dive into it and start drafting some ideas for the grip, getting the aesthetics and ergonomics dialed in. More to come! View Quote |
|
Quoted: The Marlin is in the capable hands of my ‘smith. He’s worked on target pistols before including Hammerli and Pardini examples, so he’s well familiar with the style and feel we’re going for Current plan of attack is to approach the build in stages - stage one, getting the grip/stock sorted. Stage two will be SBRing and cutting the barrel down to pistol length. When he gets back from vacation in a couple weeks he’ll really dive into it and start drafting some ideas for the grip, getting the aesthetics and ergonomics dialed in. More to come! View Quote Such a gunsmith exists in my state? I'd feel like an ass bothering him with my pedestrian requests, but you know, if you want to drop a brother an IM, that would be cool. |
|
Quoted: Sounds like you've got an awesome gunsmith. View Quote Indeed Quoted: Such a gunsmith exists in my state? I'd feel like an ass bothering him with my pedestrian requests, but you know, if you want to drop a brother an IM, that would be cool. View Quote Bart Miller and team at Legacy Gunsmithing: https://centennialgunclub.com/cgc-legacy-gunsmithing/ He did all the hard work on the Schofield, and he’s currently got the Marlin and the 1858 Remington. He’s an absolute artist and a master with metal and wood blasters. Highly recommended! |
|
Oh and @backbencher will be glad to hear - he expressed concern that the SCRS would “disrupt the visual flow” of the final gun as a quasi-classic target pistol, so it’s been removed as of now and will probably not be going back on the gun Probably gonna try it out on the Schofield as an alternative to the 512…
|
|
|
Quoted: Oh and @backbencher will be glad to hear - he expressed concern that the SCRS would “disrupt the visual flow” of the final gun as a quasi-classic target pistol, so it’s been removed as of now and will probably not be going back on the gun Probably gonna try it out on the Schofield as an alternative to the 512… View Quote Ha! Not all my instincts are bad. Next time you see him ask him if he could mill a HiPoint for a red dot. |
|
Quoted: Ha! Not all my instincts are bad. Next time you see him ask him if he could mill a HiPoint for a red dot. View Quote View All Quotes View All Quotes Quoted: Quoted: Oh and @backbencher will be glad to hear - he expressed concern that the SCRS would “disrupt the visual flow” of the final gun as a quasi-classic target pistol, so it’s been removed as of now and will probably not be going back on the gun Probably gonna try it out on the Schofield as an alternative to the 512… Ha! Not all my instincts are bad. Next time you see him ask him if he could mill a HiPoint for a red dot. I was strongly influenced by the siren song of never having to change the battery on the optic I do think that’s the future of pistol optics though honestly. But for the sake of proper aesthetics I’ll deal with the migraine of swapping coin batteries once a year |
|
Quoted: I was strongly influenced by the siren song of never having to change the battery on the optic I do think that’s the future of pistol optics though honestly. But for the sake of proper aesthetics I’ll deal with the migraine of swapping coin batteries once a year View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: Oh and @backbencher will be glad to hear - he expressed concern that the SCRS would “disrupt the visual flow” of the final gun as a quasi-classic target pistol, so it’s been removed as of now and will probably not be going back on the gun Probably gonna try it out on the Schofield as an alternative to the 512… Ha! Not all my instincts are bad. Next time you see him ask him if he could mill a HiPoint for a red dot. I was strongly influenced by the siren song of never having to change the battery on the optic I do think that’s the future of pistol optics though honestly. But for the sake of proper aesthetics I’ll deal with the migraine of swapping coin batteries once a year I don't think your choice of optic was bad, it just needs a lower riser. The SIG Romeos I bought have an AR height riser & a low mount in the box. And the future of electic optics on firearms is Seebeck generators. I'm thinking of putting one of the NcStar folding optics on my Fold AR w/ the folding pistol grip & the collapsible stock. I'd like a folding mount for it though, not much point in collapsing an optic sitting on top of a riser. |
|
Quoted: I don't think your choice of optic was bad, it just needs a lower riser. The SIG Romeos I bought have an AR height riser & a low mount in the box. And the future of electic optics on firearms is Seebeck generators. I'm thinking of putting one of the NcStar folding optics on my Fold AR w/ the folding pistol grip & the collapsible stock. I'd like a folding mount for it though, not much point in collapsing an optic sitting on top of a riser. View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: Quoted: Oh and @backbencher will be glad to hear - he expressed concern that the SCRS would “disrupt the visual flow” of the final gun as a quasi-classic target pistol, so it’s been removed as of now and will probably not be going back on the gun Probably gonna try it out on the Schofield as an alternative to the 512… Ha! Not all my instincts are bad. Next time you see him ask him if he could mill a HiPoint for a red dot. I was strongly influenced by the siren song of never having to change the battery on the optic I do think that’s the future of pistol optics though honestly. But for the sake of proper aesthetics I’ll deal with the migraine of swapping coin batteries once a year I don't think your choice of optic was bad, it just needs a lower riser. The SIG Romeos I bought have an AR height riser & a low mount in the box. And the future of electic optics on firearms is Seebeck generators. I'm thinking of putting one of the NcStar folding optics on my Fold AR w/ the folding pistol grip & the collapsible stock. I'd like a folding mount for it though, not much point in collapsing an optic sitting on top of a riser. For a while there I very seriously considered putting a NcStar folding optic on a Full Conceal folding Glock. With folding BUIS, of course: https://knsprecisioninc.com/switchsight-folding-pistol-sights/ Yes, it’s real |
|
Quoted: For a while there I very seriously considered putting a NcStar folding optic on a Full Conceal folding Glock. With folding BUIS, of course: https://knsprecisioninc.com/switchsight-folding-pistol-sights/ Yes, it’s real View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: Quoted: Quoted: Oh and @backbencher will be glad to hear - he expressed concern that the SCRS would “disrupt the visual flow” of the final gun as a quasi-classic target pistol, so it’s been removed as of now and will probably not be going back on the gun Probably gonna try it out on the Schofield as an alternative to the 512… Ha! Not all my instincts are bad. Next time you see him ask him if he could mill a HiPoint for a red dot. I was strongly influenced by the siren song of never having to change the battery on the optic I do think that’s the future of pistol optics though honestly. But for the sake of proper aesthetics I’ll deal with the migraine of swapping coin batteries once a year I don't think your choice of optic was bad, it just needs a lower riser. The SIG Romeos I bought have an AR height riser & a low mount in the box. And the future of electic optics on firearms is Seebeck generators. I'm thinking of putting one of the NcStar folding optics on my Fold AR w/ the folding pistol grip & the collapsible stock. I'd like a folding mount for it though, not much point in collapsing an optic sitting on top of a riser. For a while there I very seriously considered putting a NcStar folding optic on a Full Conceal folding Glock. With folding BUIS, of course: https://knsprecisioninc.com/switchsight-folding-pistol-sights/ Yes, it’s real I might have to put those on my 26 some day, after I get it cut for a red dot & get a threaded barrel. |
|
Quoted: I might have to put those on my 26 some day, after I get it cut for a red dot & get a threaded barrel. View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: Quoted: Quoted: Quoted: Oh and @backbencher will be glad to hear - he expressed concern that the SCRS would “disrupt the visual flow” of the final gun as a quasi-classic target pistol, so it’s been removed as of now and will probably not be going back on the gun Probably gonna try it out on the Schofield as an alternative to the 512… Ha! Not all my instincts are bad. Next time you see him ask him if he could mill a HiPoint for a red dot. I was strongly influenced by the siren song of never having to change the battery on the optic I do think that’s the future of pistol optics though honestly. But for the sake of proper aesthetics I’ll deal with the migraine of swapping coin batteries once a year I don't think your choice of optic was bad, it just needs a lower riser. The SIG Romeos I bought have an AR height riser & a low mount in the box. And the future of electic optics on firearms is Seebeck generators. I'm thinking of putting one of the NcStar folding optics on my Fold AR w/ the folding pistol grip & the collapsible stock. I'd like a folding mount for it though, not much point in collapsing an optic sitting on top of a riser. For a while there I very seriously considered putting a NcStar folding optic on a Full Conceal folding Glock. With folding BUIS, of course: https://knsprecisioninc.com/switchsight-folding-pistol-sights/ Yes, it’s real I might have to put those on my 26 some day, after I get it cut for a red dot & get a threaded barrel. Innovation can be a sonofabitch |
|
I hesitate to recommend it, but NCStar has some "futuristic" looking red dot sights that might work. They even have some that flip up.
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.