CP33 (Page 1 of 8)
Posted: 1/22/2019 4:18:17 PM EDT
[Last Edit: Trunkmonkey4][Edited]
I think this is way cool, and I want one... as soon as a pistol brace (collapsible or folding) is released for it. Seems like a way fun gun to burn through my excess 22lr.
|
|
Dahlonega Gold and Pawn, cheapest gun store I know of including online retailers.
ETA: Just fired 33 rounds of standard velocity in the back yard suppressed, just a test I really don't have a proper setup. It didn't pick up the second round, the mag follower is a tiny bit sticky but after than every round cycled perfectly. It says HV ammo only but it was slinging the brass into low earth orbit with the Aguila SuperExtra 40gr. |
| Anyone use the 22Uplula on the CP33 mags? http://www.maglula.com/product/22uplula-22lr-double-stack-mag-loader/ |
|
That's not going to work with the loading procedure of the mags. https://www.facebook.com/376139184639/posts/10157049411279640?sfns=mo |
|
Found a 3D printed magazine loader on Amazon so I decided to order and try it out. So far...I loaded 6 magazines using 3 different types of ammo (Gemtech, CCI SV, Federal Value Pack red box, and Winchester Xperts). My first couple of magazines...I did have a couple of dented cases..but I think it was my plunge technique. Looks like stagger on all 6 magazines are perfect. On average...it took about 2-3 seconds per round (grab rounds from box/holder; load round into the loader; plunge; repeat)....pretty freakin easy. I'll check for function at the range in a few days.
Here is a picture of the loaded magazines and loader and here the link to the manufacturer and where I ordered the loader: https://americanspeedloaders.com/ https://www.amazon.com/gp/product/B07QCQFHNR/ 
|
|
Originally Posted By seattlite:
Found a 3D printed magazine loader on Amazon so I decided to order and try it out. So far...I loaded 6 magazines using 3 different types of ammo (Gemtech, CCI SV, Federal Value Pack red box, and Winchester Xperts). My first couple of magazines...I did have a couple of dented cases..but I think it was my plunge technique. Looks like stagger on all 6 magazines are perfect. On average...it took about 2-3 seconds per round (grab rounds from box/holder; load round into the loader; plunge; repeat)....pretty freakin easy. I'll check for function at the range in a few days. Here is a picture of the loaded magazines and loader and here the link to the manufacturer and where I ordered the loader: https://americanspeedloaders.com/ https://www.amazon.com/gp/product/B07QCQFHNR/ https://lh3.googleusercontent.com/j1ZZcgKzXI5-PBK550b8lubelc5QzR5PlwnLUerIjVHv-jUtMPUWGqCXuWV5tEERl1lS2L3oIZeqcpKRlUwut3QRFFIeu412Yrs0_DdAxyUKE91kuxVrJnM_nlkkKYfvCfxiao1yAEM=w1702-h1276-no |
|
Originally Posted By OhioRangeTime: No sir and I look pretty often. I'll probably pick up a 22 suppressor before I buy the gun at this rate |
|
Originally Posted By anathema:
Found one Friday, during gun show setup. One of the local gun whores had it priced at $450. I asked how much if I buy today? $400 Sold. Well dang if I didn't just get lucky. At 2:30AM I started searching all over the net for the CP-33 due to a post by aimforthemedic in GD, there were NONE to be found (in my searches). Everyone was asking at or close to MSRP ($475) and asked if I wanted to be notified when back in stock. A good friend, and ARFCOM member, saw my reply in this thread and let me know he saw one just come it at a LGS near to us. So I promptly went down when the doors opened and snagged it. But it was only $369! Even came with a second mag which I wasn't expecting 
|
|
Originally Posted By Winston_Wolf:
... Awesome! Well dang if I didn't just get lucky. At 2:30AM I started searching all over the net for the CP-33 due to a post by aimforthemedic in GD, there were NONE to be found (in my searches). Everyone was asking at or close to MSRP ($475) and asked if I wanted to be notified when back in stock. A good friend, and ARFCOM member, saw my reply in this thread and let me know he saw one just come it at a LGS near to us. So I promptly went down when the doors opened and snagged it. But it was only $369! Even came with a second mag which I wasn't expecting https://www.AR15.Com/media/mediaFiles/1430/20190908_111944_HDR-1083403.jpg Originally Posted By Winston_Wolf:
Originally Posted By anathema:
Found one Friday, during gun show setup. One of the local gun whores had it priced at $450. I asked how much if I buy today? $400 Sold. Well dang if I didn't just get lucky. At 2:30AM I started searching all over the net for the CP-33 due to a post by aimforthemedic in GD, there were NONE to be found (in my searches). Everyone was asking at or close to MSRP ($475) and asked if I wanted to be notified when back in stock. A good friend, and ARFCOM member, saw my reply in this thread and let me know he saw one just come it at a LGS near to us. So I promptly went down when the doors opened and snagged it. But it was only $369! Even came with a second mag which I wasn't expecting https://www.AR15.Com/media/mediaFiles/1430/20190908_111944_HDR-1083403.jpg I have only seen one on the shelf and it was $499. |
O.K....I sold all my HKs, but I have to keep my Identity!
|
Originally Posted By seattlite:
Got me some accessories: https://lh3.googleusercontent.com/J1N4CtGnXQ8JKqzE_UG18FlGBbeY3CypNeeZzLzkVKncu3nFUGZ6A_XMGN7Ltzw49mLIP6WJSWS3lxshvWNJnujeRy13dZrxSfc0kDVfYmgrzB67flmJG453OoqUwZor2alFAcxSohY=w1440-h1068-no Looks great! |
O.K....I sold all my HKs, but I have to keep my Identity!
|
Originally Posted By HK_DUDE: How do you like the brace adaptor? Is it pretty well made, pretty solid?? Looks great! The brace feels nice; the carbon rods are more comfy than metal on the cheek; and the LOP is perfect for me. Overall build/installation is pretty solid. |
|
Originally Posted By seattlite:
Got me some accessories: https://lh3.googleusercontent.com/J1N4CtGnXQ8JKqzE_UG18FlGBbeY3CypNeeZzLzkVKncu3nFUGZ6A_XMGN7Ltzw49mLIP6WJSWS3lxshvWNJnujeRy13dZrxSfc0kDVfYmgrzB67flmJG453OoqUwZor2alFAcxSohY=w1440-h1068-no |
Your rifle is only a tool. It is a hard heart that kills.
I f*ckin hate leftists.... seriously, I do.
Joined:
May 2004
Posts:
13022
EE: 100% (191)
USA
|
Originally Posted By seattlite:
Got me some accessories: https://lh3.googleusercontent.com/J1N4CtGnXQ8JKqzE_UG18FlGBbeY3CypNeeZzLzkVKncu3nFUGZ6A_XMGN7Ltzw49mLIP6WJSWS3lxshvWNJnujeRy13dZrxSfc0kDVfYmgrzB67flmJG453OoqUwZor2alFAcxSohY=w1440-h1068-no |
|
Originally Posted By Winston_Wolf:
... Awesome! Mine will look almost exactly like that in a week or so Originally Posted By Winston_Wolf:
Originally Posted By seattlite:
Got me some accessories: https://lh3.googleusercontent.com/J1N4CtGnXQ8JKqzE_UG18FlGBbeY3CypNeeZzLzkVKncu3nFUGZ6A_XMGN7Ltzw49mLIP6WJSWS3lxshvWNJnujeRy13dZrxSfc0kDVfYmgrzB67flmJG453OoqUwZor2alFAcxSohY=w1440-h1068-no 
|
|
Originally Posted By Winston_Wolf:
... done, did https://www.AR15.Com/media/mediaFiles/1430/CP33_a-1090287.jpg |
O.K....I sold all my HKs, but I have to keep my Identity!
|
Where can the CP33 Loader be found and bought? I have emailed the guy from the link above, and received only what I was asking about back, No reply to my question. Very odd indeed!Took him awhile also to email me back as well too. If any would has any ideal, it would be much appreciated... to know something. Would love to buy one of these magazine loaders. Thanks in advance everyone.
Spector |
|
Originally Posted By spector:
Where can the CP33 Loader be found and bought? I have emailed the guy from the link above, and received only what I was asking about back, No reply to my question. Very odd indeed!Took him awhile also to email me back as well too. If any would has any ideal, it would be much appreciated... to know something. Would love to buy one of these magazine loaders. Thanks in advance everyone. Spector |
|
Originally Posted By Winston_Wolf:
... done, did https://www.AR15.Com/media/mediaFiles/1430/CP33_a-1090287.jpg |
| I just received and installed my FarrowTech Tailhook telescoping brace adapter. Wow! It is damn solid and nice piece. Just don’t plan on using the factory sights with it, as you can’t get your head down low enough to use them. It works very nicely with an RMR with raised mount. |
"I see dumb people... they're everywhere. They walk around like everyone else. They don't even know that they're dumb."
|
Thanks to you guys, now I need one of these.
Took the first step and ordered the mag loader 
Now I need the actual gun, 4 more mags and the brace setup. Thanks for helping me spend my money that I don't actually have..haha. For those that have the brace and a reddot...how is the cheek weld on the brace adaptor rods? Is the charging handle easy to run with rhe brace setup installed? A left side extension seems in order. |
O.K....I sold all my HKs, but I have to keep my Identity!
|
Originally Posted By HK_DUDE: Thanks to you guys, now I need one of these. Took the first step and ordered the mag loader Now I need the actual gun, 4 more mags and the brace setup. Thanks for helping me spend my money that I don't actually have..haha. For those that have the brace and a reddot...how is the cheek weld on the brace adaptor rods? Is the charging handle easy to run with rhe brace setup installed? A left side extension seems in order. The carbon rods are nice and smooth. |
|
In the information on the brace/adaptor it says the length of pull is under 13.5".....as per ATF.
I thought 12.5" was the magic number? Either way, what is the LOP? Not that it should be shouldered, but out of curiosity. |
O.K....I sold all my HKs, but I have to keep my Identity!
|
Originally Posted By seattlite:
Nice! So....what do you think about the combo? Originally Posted By seattlite:
Originally Posted By Winston_Wolf:
... done, did https://www.AR15.Com/media/mediaFiles/1430/CP33_a-1090287.jpg
|