User Panel
Posted: 4/23/2024 8:33:28 PM EDT
For a bedside gun? Any functioning problems or not worth any headaches?
Basically a stock G34 with an RDS, 9mm+P, and a Surefire light. It's got a threaded bbl, but I could always just put a thread protector on it. |
|
"An age of glory passed like a lightning flash. The mandate of heaven passed from you but you didn't see. Times change and power passes. It is the pity of the world."
Song dynasty poet |
[Last Edit: Urimaginaryfrnd]
[#1]
Should have been a poll.
1. Add Suppressor 2. Choose larger caliber Glock 35 3. 1911 or go home 4. Add Comp direct gas up to mitigate severe 9mm recoil. 5. Add tripod & training wheels 6. Thread protector will do till suppressor gets out of jail. I’m going with #2 only because I have a 35 but no 34 |
|
|
[Last Edit: ScoutH57]
[#2]
I like comped 9mm handguns but I really wouldn’t bother with it on a 34. Can take some tweaking to get them to run depending on the comp
If I did I’d have it ported. Works better anyway |
|
|
[#3]
Originally Posted By Urimaginaryfrnd: Should have been a poll. 1. Add Suppressor 2. Choose larger caliber Glock 35 3. 1911 or go home 4. Add Comp direct gas up to mitigate severe 9mm recoil. 5. Add tripod & training wheels 6. Thread protector will do till suppressor gets out of jail. I’m going with #2 only because I have a 35 but no 34 View Quote I don't do multi-option polls because it smacks of GD without providing useful information. |
|
"An age of glory passed like a lightning flash. The mandate of heaven passed from you but you didn't see. Times change and power passes. It is the pity of the world."
Song dynasty poet |
[#4]
Originally Posted By Strela: For a bedside gun? Any functioning problems or not worth any headaches? Basically a stock G34 with an RDS, 9mm+P, and a Surefire light. It's got a threaded bbl, but I could always just put a thread protector on it. View Quote I would say no. You will probably be blind after the first shot anyway. JD |
|
|
[Last Edit: Urimaginaryfrnd]
[#5]
Correct answer is a suppressor, either sound or flash.
Compensators tend to be louder from the shooters position likely with increased flash. I’m inclined to say: go to a Smith Vortex flash suppressor instead that spins gasses forward saving your vision. https://www.smithenterprise.com/product/pn-1001v-g6a3-cz-9mm-vortex-1-2x28/ |
|
|
[#6]
Originally Posted By Urimaginaryfrnd: Correct answer is a suppressor, either sound or flash. Compensators tend to be louder from the shooters position likely with increased flash. I’m inclined to say: go to a Smith Vortex flash suppressor instead that spins gasses forward saving your vision. https://www.smithenterprise.com/product/pn-1001v-g6a3-cz-9mm-vortex-1-2x28/ View Quote I've used numerous Vortex FHs on ARs, but never on a handgun. Won't the weight affect functioning? As far as flash, I'm sure a 9mm comp can't be worse than the 5.56 AR next to the bed. |
|
"An age of glory passed like a lightning flash. The mandate of heaven passed from you but you didn't see. Times change and power passes. It is the pity of the world."
Song dynasty poet |
[Last Edit: Urimaginaryfrnd]
[#7]
AR will likely have a flash suppressor even if it’s the standard one it won’t be directing gas back.
Smith Vortex on a threaded Glock 34 should be good to go. The weight forward isn’t much certainly not as much as a weapon light. If anything it should not only help significantly reduce flash while weight forward reduces muzzle flip, not that a 9 with that much barrel length has much recoil but the fact that it does not re direct gases back or add back pressure but instead spins the gasses forward should be the most desirable and beneficial outcome as it reduces flash saving your vision allowing you to aim after the first shot, reduces muzzle flip, and in the event the flash suppressor is in direct contact with the body of your attacker you get “blow bye” not “blow back” . With “blow back” the un- modified barrel upon firing in direct contact with the attacker’s body causes vacuum pressure that sucks blood etc back into the barrel causing a failure. With the flash suppressor the holes along its sides mitigate that and the blood etc sprays to the sides not entering the barrel. Yes it will look different but range test it at night to see how much it mitigates the flash. Want to test “blow by” put it up against a steak. I’ve run a modified Smith Vortex (5/8 24 reamed to .500 on a lathe) on .44 & .45 with good results. The difference is what direction the gas goes. |
|
|
[#8]
Originally Posted By Urimaginaryfrnd: AR will likely have a flash suppressor even if it’s the standard one it won’t be directing gas back. Smith Vortex on a threaded Glock 34 should be good to go. The weight forward isn’t much certainly not as much as a weapon light. If anything it should not only help significantly reduce flash while weight forward reduces muzzle flip, not that a 9 with that much barrel length has much recoil but the fact that it does not re direct gases back or add back pressure but instead spins the gasses forward should be the most desirable and beneficial outcome as it reduces flash saving your vision allowing you to aim after the first shot, reduces muzzle flip, and in the event the flash suppressor is in direct contact with the body of your attacker you get “blow bye” not “blow back” . With “blow back” the un- modified barrel upon firing in direct contact with the attacker’s body causes vacuum pressure that sucks blood etc back into the barrel causing a failure. With the flash suppressor the holes along its sides mitigate that and the blood etc sprays to the sides not entering the barrel. Yes it will look different but range test it at night to see how much it mitigates the flash. Want to test “blow by” put it up against a steak. I’ve run a modified Smith Vortex (5/8 24 reamed to .500 on a lathe) on .44 & .45 with good results. The difference is what direction the gas goes. View Quote The flash/blast from a 5.56, no matter how good a (non-suppressor) flash hider, is much more severe than any standard 9mm round There's a difference between weight attached to the frame and hanging off the end of the bbl with a modified Browning-style locking system. .44 & .45 revolvers? |
|
"An age of glory passed like a lightning flash. The mandate of heaven passed from you but you didn't see. Times change and power passes. It is the pity of the world."
Song dynasty poet |
[Last Edit: Urimaginaryfrnd]
[#9]
Glock 21 👍
Henry X. 👍 Why would you think there would be a significant difference between the weight of a compensator vs the Smith Vortex? Lots of people are running compensators on pistols. If that’s the route you prefer it’s ok it still gives blow by not blow back. 9mm compensators I guess I think it would work on a Glock 34 because it works on a Glock 21…. Your mileage may vary, but where do you think the weight of a sound suppressor is? |
|
|
[#10]
I put a comp on a Gen 4 34 years ago for fun and it sucked. It wouldn't cycle half of the stuff I had on hand (mostly 115 and 124 blaster rounds), stovepipe 5-6 times a mag, lazy ejection, etc.
Looked kind cool...but was a waste of time overall. |
|
|
[Last Edit: jrs93accord]
[#11]
I would not bother with a comp on a G34 for general purpose use. I would just throw a thread protector on the barrel and call it good.
|
|
"A bad day shooting beats a great day working!"
|
[Last Edit: Urimaginaryfrnd]
[#12]
Surely someone here is running a sound suppressor on a Glock 34. It would be great to know their thoughts on this.
https://lonewolfdist.com/lwd-flash-hider-9mm/ This Might work. |
|
|
[#13]
If your plan is to shoot it indoors, suppress it.
|
|
If the truth makes you uncomfortable, don't blame the truth. Blame the lie that made you comfortable. -James Ng Uni
|
[#14]
|
|
|
[#15]
Originally Posted By Urimaginaryfrnd: Glock 21 👍 Henry X. 👍 Why would you think there would be a significant difference between the weight of a compensator vs the Smith Vortex? Lots of people are running compensators on pistols. If that’s the route you prefer it’s ok it still gives blow by not blow back. 9mm compensators I guess I think it would work on a Glock 34 because it works on a Glock 21…. Your mileage may vary, but where do you think the weight of a sound suppressor is? View Quote Because less than one ounce for a Faxon comp vs. 3 ounces for a Smith Vortex would I think make a difference in functioning on a Browning-style system. My Gemtech Vortex can (no booster) is really light, but it will only function reliably on a Beretta. |
|
"An age of glory passed like a lightning flash. The mandate of heaven passed from you but you didn't see. Times change and power passes. It is the pity of the world."
Song dynasty poet |
[Last Edit: patw]
[#16]
Personally, I don't see the benefit on a G34 size gun. The recoil is very little due to it's longer barrel/slide. At night, the escaping gases/flash from a comp could play havoc with your vision. With that said, I have a few pistols with a comp but I don't use one for a night stand/home defense gun.
|
|
Be the change you want in this world.
|
[#17]
I would find a ported barrel on ebay.
|
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.