Posted: 8/20/2015 10:51:48 PM EDT
[Last Edit: Talyn][Edited]
|
Is your 45 deg selectors compatible?
Ruger has set the RPR with a 45 degree throw. Thx |
|
Originally Posted By wdigeorge:
We have not tested the Ruger RPR. If it does not have the clearance cut for the "safety pin" then it would not be compatible. Thx. But one just has to grind the pin off right? Ruger seems to have just put a standard single-side AR selector in the RPR, and there is slop in it. But the throw is only 45 deg. So because of that would it be best to put a standard ambi dexterous selector in to replace it, or even though there's a 45 deg throw would a 45 deg selector not be suitable? I try to use your selectors on all my ARs and would like to do the same on the RPR. Regards |
|
The Ruger Precision Rifle (RPR) is not an AR, but it uses a AR safety leaver. Ruger has designed the safety throw is to be 45 deg. So would the 45 deg. BAD would be appropriate since the RPR is set up for a 45 deg. movement vs. a standard AR throw and BAD?
Your reply is appreciated. Thx |
|
Originally Posted By cormorantslayer:
From what I can understand the selector is a standard AR15 style. The 45 degree throw seems to be incorporated into the trigger design.... Thanks, I know all that since I have an RPR, but thanks for your conclusion. I'll go from there. |