Posted: 3/13/2024 1:04:26 PM EDT
|
Question if I have a 5.56 AR that I want to mount AEMB Brake in 1/2x28 ID thread, and building a 300 blk out AR that will have AEMB in 5/8X24 ID thread, is the OD for both brakes the same where I could switch the AEM5-30K can between the two gun's? They used to have technical drawings on the old Allen Engineering site, but cant find them on the new site, and 3 days into waiting for a reply from them, just wondering if you might have had anyone trying to do the same? |
|
Originally Posted By MDFI_29: Question if I have a 5.56 AR that I want to mount AEMB Brake in 1/2x28 ID thread, and building a 300 blk out AR that will have AEMB in 5/8X24 ID thread, is the OD for both brakes the same where I could switch the AEM5-30K can between the two gun's? The external thread on the muzzle brake is the same whether the suppressor is 5.56 or 7.62 |
I'm no good at telling people what they want to hear when I dont believe it myself :)
|
Awesome, so I can switch the "CAN" back and forth between guns, thanks for the quick reply. Couple more questions, can that brake be pined and welded? and on your site it's said you have your own collar you use when setting up the mounting system is that correct? Do you offer a Brake that would work as well? |