Posted: 11/29/2025 5:28:27 PM EDT
[Last Edit: DirtyHandsRob][Edited]
|
I'm getting a fancy 22 Creedmoor bolt action to hunt coyotes. I was using your 5.56 Mini Boar for an AR/223 and would like to use something similar for this new gun kit. Do you guys have anything that will fit 10-12 rd AICS mags? ETA: So after looking at the website more, I wonder if a Shooter's Harness with some of your AICS pouches would be what I need. So, Stu & Co - what do you think? |
Avatar by NorthPolar
|
Hello Rob. Sorry. I have not been monitoring this as well as I normally would be. We do have an AICS magazine pouch and it will fit nicely on a molle webbing with a few different types of attachments. The Malice clip is my preferred method. |
Esstac’s Retarded Social Media Influencer
|
The shooters harness would be the best option for you as we really don’t have a molle only vest (tons of usgi options there and we didn’t reinvent the wheel.) if you have plates and a plate carrier we do have molle only front panels that you could use to put a couple of those pouches on as well. It would also take them on the sides depending on what cumberbund version you selected. @dirtyhandsrob Again, sorry for the delay. |
Esstac’s Retarded Social Media Influencer
|
Originally Posted By DirtyHandsRob: Thanks @NachoDip This won't be used with a PC since the coyotes haven't figured out how to shoot back. I need to really get a new rig set up as my gun should be finished soon. How many mags are you planning to carry for this setup? |
Esstac’s Retarded Social Media Influencer
|
Originally Posted By NachoDip: How many mags are you planning to carry for this setup? Originally Posted By NachoDip: Originally Posted By DirtyHandsRob: Thanks @NachoDip This won't be used with a PC since the coyotes haven't figured out how to shoot back. I need to really get a new rig set up as my gun should be finished soon. How many mags are you planning to carry for this setup? Probably just 2 spare mags. Would it help if I post my 556 chest rig so you get an idea what I want to replicate? |
Avatar by NorthPolar
|
Originally Posted By NachoDip: Post it on up. I’ll see if we can figure it out. Originally Posted By NachoDip: Originally Posted By DirtyHandsRob: Probably just 2 spare mags. Would it help if I post my 556 chest rig so you get an idea what I want to replicate? Post it on up. I’ll see if we can figure it out. This is what I currently have and I'm looking to do something similar with AICS mags. 1 spare 30rd mag, Foxpro remote, top pouch has hand calls, dangler has light, TQ/IFAK items. The remote fits behind the magazine when I don't need to hold it.  My biggest complaint is how hard it is to get the back straps correct while wearing a few layers of clothes and a heavy jacket. @NachoDip |
Avatar by NorthPolar
|
Originally Posted By DirtyHandsRob: This is what I currently have and I'm looking to do something similar with AICS mags. 1 spare 30rd mag, Foxpro remote, top pouch has hand calls, dangler has light, TQ/IFAK items. The remote fits behind the magazine when I don't need to hold it. https://www.ar15.com/media/mediaFiles/204013/1183-3684845.jpg My biggest complaint is how hard it is to get the back straps correct while wearing a few layers of clothes and a heavy jacket. @NachoDip Edited. Rethinking. Ok. So what I want to do is suggest this I want to try an experiment with fitment of some pieces in the shop. I think this might be able to be used with a small spacer added under the mag. It will give you a 4 mag capacity and you can add the similar items to your other setup on the outside. Some slight adjustments may be needed. I can find out on Jan 1st if it will work. I can also play around with things at the shop and see if I can make a config that will do what you’re looking for. To be clear. Not recommending this until I can do some test fitting. Will post an update Jan1 
|
Esstac’s Retarded Social Media Influencer
|
Originally Posted By NachoDip: Edited. Rethinking. Ok. So what I want to do is suggest this I want to try an experiment with fitment of some pieces in the shop. I think this might be able to be used with a small spacer added under the mag. It will give you a 4 mag capacity and you can add the similar items to your other setup on the outside. Some slight adjustments may be needed. I can find out on Jan 1st if it will work. I can also play around with things at the shop and see if I can make a config that will do what you’re looking for. To be clear. Not recommending this until I can do some test fitting. Will post an update Jan1 https://www.ar15.com/media/mediaFiles/77421/IMG_3611-3685073.png Ok, standing by. |
Avatar by NorthPolar
|
Big thanks to @NachoDip for helping me spend my money at Esstac. He answered numerous questions and he made the magic happen. So I ended up going with a split front 7.62 Boar and a couple of pouches all in MC Arid. The middle 2 mag pouches have AI mag inserts so they fit the shorter AICS mags. The split front helps don and off the chest rig when wearing a thick/heavy jacket. I can't wait to slay coyotes with it! 
|
Avatar by NorthPolar
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter