If you've got BCM, post it. (Page 9 of 12)
|
Originally Posted By Stickman:
Beautiful. Thank you sir! ---------- Pic thread: Here's what wolf gray and tactical gray look like together... I ended up swapping them back through. Top is also a 16" w/ KMR13 
Pinned 14.5" w/ KMR13 
16" ELW w/ KMR15 and a 16" standard middy 
|
|
|
|
Originally Posted By Stickman:
http://66.media.tumblr.com/54a34391a022ebf11cf95524d24ec3f0/tumblr_obii4ntqXS1rrcg2fo1_1280.jpg So that company uses the same mounting "hardware" and bcm' KMR? |
--------------------------------
Get on the train, citizen.
--------------------------------
Get on the train, citizen.
--------------------------------
|
|
|
I finally finished my build with the PredatAR barrel that I won this summer. I'm hoping to take it out next weekend, what do y'all think? I was going for a lightweight build but I haven't decided on a red dot yet so I threw my Accupower on it for now.
Specs: - 16" Larue PredatAR barrel with M4 feedramps - BCM upper receiver - BCM 15" KMR-A - BCM mod 4 CH - Spikes Florida HTF lower receiver - BCM Gunfighter stock - Magpul K2 grip - Trijicon Accupower 1-4 
|
|
|
Originally Posted By Dlow:
So that company uses the same mounting "hardware" and bcm' KMR? Originally Posted By Dlow:
Originally Posted By Stickman:
http://66.media.tumblr.com/54a34391a022ebf11cf95524d24ec3f0/tumblr_obii4ntqXS1rrcg2fo1_1280.jpg So that company uses the same mounting "hardware" and bcm' KMR? Sorry for the late reply, yes, they licensed it from BCM. It was all done above the board. |
|
Originally Posted By GoRebels:
Thinking I'm doing a 13.7 BCM with 13.5 KMR next after I complete my G Rail 13.7.................. 14.5" Carbine http://i1291.photobucket.com/albums/b543/powerstrokin06/Mobile%20Uploads/image_zpsfj7io8wx.jpeg http://i1291.photobucket.com/albums/b543/powerstrokin06/Mobile%20Uploads/image_zpso4dtdcnu.jpeg That is pretty much a perfect GP AR in my mind, all quality components. While there are people who prefer one stock or grip over another, I don't think anyone would have a problem using this as is. Very nicely done!! |
|
|
Originally Posted By Stickman:
Sorry for the late reply, yes, they licensed it from BCM. It was all done above the board. Originally Posted By Stickman:
Originally Posted By Dlow:
Originally Posted By Stickman:
http://66.media.tumblr.com/54a34391a022ebf11cf95524d24ec3f0/tumblr_obii4ntqXS1rrcg2fo1_1280.jpg So that company uses the same mounting "hardware" and bcm' KMR? Sorry for the late reply, yes, they licensed it from BCM. It was all done above the board. that's funny when you read what's on the rail 
|
I got screwed in the butt department. -OnlineAllTheTime
I can't imagine being so utterly clueless and then thinking you have a valid point to make in a public forum. -Lumpy196
I can't imagine being so utterly clueless and then thinking you have a valid point to make in a public forum. -Lumpy196
" />
|
Originally Posted By Stickman:
http://67.media.tumblr.com/c58ff6aecc31387254caa48c38e54ed6/tumblr_oenlmyRPy51rrcg2fo1_1280.jpg A BCM dissipator  Please make this happen! I've been patiently waiting since the 2010 "Should they make it or not" thread 
|
|
I needs one of these.................
|
|
Stick is Rainier doing these custom KMR-A cuts for FSB? |
|
I bought this upper a while back to mount on a
Stag lower.... BCM Upper I have not fired it yet, but I am quite pleased with the weight and how well it points... I have a Vortex Strike Eagle mounted to the top and yet feel as if I could just tilt it to the one o'clock position for room clearing, it feels like it flows that well... I have a class later this week and hope I can test it then. 
|
I remember when I lost my mind. But it wasn't because I didn't know enough. I just knew too much....
I'm taking comfort in the fact that Jesus wasn't liked when he was alive either.
I'm taking comfort in the fact that Jesus wasn't liked when he was alive either.
Some BCM/AAC two stamp goodness
Attached File Sir James... |
Live on the wet side of WA but the Hi-Line is home
|
Attached File Next up will be a BFH LW with pinned BC and C4 midcutout rail and lastly a LW with Mlok when releases |
If you've got BCM, post it. (Page 9 of 12)
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter