Posted: 11/3/2022 12:23:25 AM EDT
Who has articulating duals that are not 31s or dtnvg(old and new style)
|
|
Originally Posted By Magsz18: Tell me more... BNVD 1431's. I could use something like this for work! Originally Posted By Magsz18: Tell me more... BNVD 1431's. I could use something like this for work! I know one specific bnvd has already been test fit and was gtg but it's been months and waiting for a reply of what brand it is. Under the impression there are many different makers using the name bnvd? Probably wrong tho Originally Posted By Stillnothere: I have a Katana, though if you want to borrow it you'll have to wait till the end of the month. Think katana is gtg. Believe that's the photonis loaner set we have on hand but it wasn't in the shop yesterday for me to confirm brand before posting. Will know more and snag pics later today |
|
Originally Posted By esstac-: Sounds gross and huge.... I'll post dimensions later. There is another option that might fit that I'll post pics of later also Originally Posted By esstac-: Originally Posted By DirtyHandsRob: What about PVS14/MH25 combo on a Wilcox bridge? Sounds gross and huge.... I'll post dimensions later. There is another option that might fit that I'll post pics of later also Stop being gross and huge - or I'll email Stu about it. |
Avatar by NorthPolar
|
Originally Posted By esstac-: Who has articulating duals that are not 31s or dtnvg(old and new style) https://www.ar15.com/media/mediaFiles/72956/PXL_20221103_041959709-2585944.jpg |
Dear NASA,
I was big enough for your mom.
Sincerely,
Pluto
I was big enough for your mom.
Sincerely,
Pluto
|
Originally Posted By Millennial: I’ve got NPBM bridged -14’s … if those count. And an RH25 bridged with a 14 on a fake Wilcox bridge … jury is still out on whether it’s more than a novelty though. Forgot to actually measure the inside dims.... I'll half ass measure it now 6tall x 7.5wide x 2.25-2.5deep(pouch is wider in the center for the bridge) |
|
Originally Posted By Stillnothere: Nice. What about any of those options with a coti attached? Can have the Coti mount mounted but obviously not the Coti. Depending on the housing it may fit in the case, may* The larger padded case will fit the Coti off to the side or your helmet mount. Or both. Small tegris lined case pictured is meant to be as small as possible. Toss in a pack or whatever. And offer as much protection as possible in it's size constraint. Pretty beefy for it's size with the 12 layer tegris. There is also a side pouch that attaches to this one for other crap as an option if this is not to be mounted itself to something. Can fit some batts in with the nods now like I already do buy more options with the thin side pouch. |
|
Originally Posted By esstac-: Forgot to actually measure the inside dims.... I'll half ass measure it now 6tall x 7.5wide x 2.25-2.5deep(pouch is wider in the center for the bridge) Where is this on the site? Can I get it by next Friday? |
Dear NASA,
I was big enough for your mom.
Sincerely,
Pluto
I was big enough for your mom.
Sincerely,
Pluto
|
Originally Posted By esstac-: 6tall x 7.5wide x 2.25-2.5deep(pouch is wider in the center for the bridge) Using my trusty Harbor Freight tape measure, I measured my PVS/MH25 on a Wilcox bridge it is When flat it is 10.25" x 5.25" x 4.25" When arms are down it is 5" x 7" x 6" It looks too buku to you. |
Avatar by NorthPolar
|
Originally Posted By DirtyHandsRob: Using my trusty Harbor Freight tape measure, I measured my PVS/MH25 on a Wilcox bridge it is When flat it is 10.25" x 5.25" x 4.25" When arms are down it is 5" x 7" x 6" It looks too buku to you. Obvious compensating is obviously |
|
Originally Posted By southerncross: Because I'm not a bitch? Attached File |
|
Originally Posted By southerncross: Tittieshttps://www.ar15.com/media/mediaFiles/157261/PXL_20221115_030648770-2600476.jpghttps://www.ar15.com/media/mediaFiles/157261/PXL_20221115_030657524-2600477.jpghttps://www.ar15.com/media/mediaFiles/157261/PXL_20221115_030725092-2600478.jpghttps://www.ar15.com/media/mediaFiles/157261/PXL_20221115_030730804-2600479.jpg Awesome as usual. Thanks Stu! What nods were those? And assuming they fit |
|
Originally Posted By southerncross: Tittieshttps://www.ar15.com/media/mediaFiles/157261/PXL_20221115_030648770-2600476.jpghttps://www.ar15.com/media/mediaFiles/157261/PXL_20221115_030657524-2600477.jpghttps://www.ar15.com/media/mediaFiles/157261/PXL_20221115_030725092-2600478.jpghttps://www.ar15.com/media/mediaFiles/157261/PXL_20221115_030730804-2600479.jpg Awesome as usual. Thanks Stu! That is really neat! Is it hard sided? Tegris insert? |
I swear to God I'm going to pistol whip the next guy who says, " Shenanigans."