User Panel
User Panel
User Panel
ME, USA
|
Posted: 1/12/2015 2:40:57 AM EST
[Last Edit: Cavitation]
[#1]
Top is a 18 inch 6.8 Bottom is a 16 inch 5.56
PSA lowers with PSA / BLACKHAWK parts. Uppers and upper parts with bolts are PSA. UTG rails. The 5.56 has a DPMS A2 stock. 
|
|
|
NV, USA
|
Posted: 1/16/2015 9:00:12 AM EST
[Last Edit: tenchi]
[#2]
edited
|
|
|
CO, USA
|
Posted: 1/17/2015 2:23:21 PM EST
[#3]
Here is my most recent build. M4 Palmetto Premium upper. The Lower is a Nat Mil with a Palmetto build kit. Troy Backup sites, Samson rail, and a leupold Mark AR 1.5-4 in an ADM mount. I realy like this setup.
|
|
|
PA, USA
|
Posted: 1/18/2015 8:30:44 AM EST
[#4]
|
|
|
NC, USA
|
Posted: 1/20/2015 9:24:01 AM EST
[Last Edit: Fobba_Beans]
[#5]
Here's my M4 build. I color filled it last week and this rifle rocks.
|
|
|
MN, USA
|
Posted: 1/24/2015 2:37:07 AM EST
[Last Edit: check-raiser]
[#6]
16" 9mm PSA upper on a blem PSA lower, finished
with FDE B5 Systems Sopmod stock, midlength keymod handguard, grip, trigger guard, and qd sling plate. Rear sight en route from PSA 
|
|
|
IN, USA
|
Posted: 1/28/2015 8:08:20 PM EST
[Last Edit: wsenefeld]
[#7]
|
|
|
SD, USA
|
Posted: 1/28/2015 8:38:50 PM EST
[#8]
|
|
|
AK, USA
|
Posted: 1/31/2015 8:20:13 PM EST
[#9]
Quote HistoryOriginally Posted By Cavitation:
Top is a 18 inch 6.8 Bottom is a 16 inch 5.56 PSA lowers with PSA / BLACKHAWK parts. Uppers and upper parts with bolts are PSA. UTG rails. The 5.56 has a DPMS A2 stock. http://i306.photobucket.com/albums/nn244/Velocitywhore/078_zps1990a208.jpg http://i306.photobucket.com/albums/nn244/Velocitywhore/12131415571_zps48addd6a.jpg What's the scope and mount on your 6.8? And how's it working for you? |
|
|
KY, USA
|
Posted: 2/5/2015 6:24:14 AM EST
[Last Edit: darink300zx]
[#10]
My first PSA "build" although it was really not much of a build. I bought both the assembled upper, m16 bcg/carry handle, and complete lower from PSA and slapped em together. lol. I've since traded off this rifle, but it shot great. It's a PTAC 189.99 special upper. I had no issues with it. Cheap UTG red dot and magpul bus. The parts (minus the sights) were right at 525 dollars which includes shipping and FFL fee.
Oh and I did a video on my youtube channel about this rifle if your interested. [youtube]https://www.youtube.com/watch?v=dt4R0jibnEc&list=UUJ9TysEIGyveqp2tL7cq-Tg[/youtube] Darin. Edit: When I previewed my post it showed my pic, not a link, is there something I'm doing wrong? |
|
|
|
Posted: 2/7/2015 1:08:01 PM EST
[#11]
here is mine, just completed it, working out the bugs but so far am happy with it. flash hider and barrel were both sent off to wmd guns, barrel is stainless and wanted it black.
came out nice.   |
|
|
|
AL, USA
|
Posted: 2/8/2015 10:30:48 AM EST
[Last Edit: Bigboreshooter]
[#12]
|
|
|
AK, USA
|
Posted: 2/8/2015 7:00:36 PM EST
[Last Edit: Nomad91]
[#13]
 " />
PSA CHF MID complete upper W/BCG. RF micro gas block. UTG Keymod 15" FDE cerakote rail. MBUS FRONT. KNS .034" front post. KAC 2-6 micro rear sight. Bushnell TRS-25 red dot w/cowitness riser. PSA Complete FDE cerakote lower. QMS FCG w/JP red and yellow springs. spikes moe clone grip. MFT stock homemade "VTAC" style sling. |
|
|
IL, USA
|
Posted: 2/16/2015 3:02:32 AM EST
[Last Edit: SHAD0WF0X]
[#14]
Here's a pic of my recently completed PSA PA10
Upper: PSA PA10 Upper Receiver PSA 18" 1:10 416 SS barrel Midwest Industries 15" SSK Rail PA-10 bolt carrier group. 9310 steel Phosphated bolt PSA CH PSA Firing Pin Lower: PSA PA10 lower PSA PA10 Classic lower build kit Magpul MOE SL Stock ALG ACT Trigger Optic: Vortex Viper PST 1-4x24mm |
|
|
TN, USA
|
Posted: 2/28/2015 1:00:04 PM EST
[#15]
Great build, great photos.
|
|
|
TN, USA
|
Posted: 2/28/2015 2:13:15 PM EST
[Last Edit: gruvmann]
[#16]
Seeing all these great builds, I remembered "wait a minute, I painted my PSA build a while back and never posted photos..." You can find my original build thread here, with links to a range report as well.
Nothings changed except the paint. Went for a grey/urban type camo on the rifle, optic, and mags. The paint is starting to wear and look really nice:) 
my original PSA build, made new... 
Primary Arms red-dot... although recent use has me considering a 1-4 optic... 
receiver from Tactical Innovations... 
the barrel spec and "Palmetto" imprint is still barely visible... |
|
|
KY, USA
|
Posted: 3/1/2015 9:36:45 AM EST
[#17]
16 inch SS fluted upper with 13.5 inch SQR rail. PSA nickel boron BCG. BCM mod 4 CH. Anderson lower with PSA lower parts kit, MOE grip, and Magpul ASC-L stock. Nice shooter.
Visit my channel for some videos about this gun. Darink300zx Youtube channel. |
|
|
IN, USA
|
Posted: 3/12/2015 7:27:44 PM EST
[#18]
|
|
|
NC, USA
|
Posted: 3/14/2015 8:42:50 AM EST
[Last Edit: PhilDNice]
[#19]
|
|
|
TN, USA
|
Posted: 3/14/2015 5:32:23 PM EST
[Last Edit: eastbound12000]
[#20]
PA-10 with ss 18" barrel, Diamondhead 15" rail, Magpul M-Pro's, RRA two-stage trigger, and a FSC-30 flash suppressor. Had to take a tiny bit off the back end of the RRA hammer to allow the bolt to run without hanging up, but no other issues during assembly.
PA-10 with 18" barrel and 15" Samson Evolution rail. 
|
|
|
UT, USA
|
Posted: 3/17/2015 12:18:54 PM EST
[#21]
https://www.flickr.com/photos/130231646@N06/16844864241/ PSA lower, BRB tactical upper, chrome BCG, Magpul accessories, and sightmark optic. Its my new bedside gun. |
|
|
UT, USA
|
Posted: 3/17/2015 12:28:16 PM EST
[Last Edit: dgrenshaw]
[#22]
how come I cant get my pics to auto format? |
|
|
VA, USA
|
Posted: 3/31/2015 11:10:11 PM EST
[#23]
Latest ar15 build PSA CHF stainless mid length
Bushnell Ar Optics Magpul Stock and Handguards 
|
|
|
VA, USA
|
Posted: 3/31/2015 11:16:45 PM EST
[Last Edit: bdp1174]
[#24]
|
|
|
MI, USA
|
Posted: 4/7/2015 12:13:45 PM EST
[#25]
|
|
|
IN, USA
|
Posted: 4/7/2015 2:21:08 PM EST
[#26]
|
|
|
|
Posted: 4/16/2015 8:05:15 AM EST
[#27]
Assembled this last night.
PTAC TAC-10 lower PSA PA10 complete upper -- 18" melonited barrel, 15" SS15G2 rail (+ MI panels/bipod stud), PSA BCG/CH/etc... PSA PA10 LPK w/ ACT trigger + JP springs + JoeBob set screw grip screw PSA PA10 buffer tube/ H marked buffer/spring MIAD AR10/SR25 grip B5 SOPMOD stock PA 4-14x44 FFP ACSS mounted in an ADM RECON mount Harris S-BRM bipod 
|
|
|
|
|
Posted: 4/17/2015 4:25:23 PM EST
[#28]
Quote HistoryOriginally Posted By wsenefeld:
My second PSA PA-10 build. Wondering if they have the trigger bug worked out? I purchased this lower during the Easter sale, put in a Geissele SSA-E and the bcg cycles without any issues. <a href="http://s1101.photobucket.com/user/wsenefeld/media/Mobile%20Uploads/2015-04-07_151128.jpg.html" target="_blank">http://i1101.photobucket.com/albums/g432/wsenefeld/Mobile%20Uploads/2015-04-07_151128.jpg</a> Nice!! 
|
|
|
|
NH, USA
|
Posted: 4/20/2015 3:08:20 PM EST
[Last Edit: NHForester]
[#29]
Here is a PSA Dissipator build recently completed. Anderson lower.
|
|
|
FL, USA
|
Posted: 4/29/2015 6:13:11 PM EST
[Last Edit: DiverDoc]
[#30]
http://s36.photobucket.com/user/crazydoc68/media/PA10/image.jpg1_zpsm3pjrzvo.jpg.html?sort=3&o=7
Here's mine! |
|
|
FL, USA
|
Posted: 4/29/2015 6:14:41 PM EST
[#31]
|
|
|
|
Posted: 4/30/2015 10:54:36 AM EST
[#32]
|
|
|
|
|
Posted: 5/2/2015 1:18:05 PM EST
[#33]
|
|
|
|
CA, USA
|
Posted: 5/10/2015 1:48:13 AM EST
[Last Edit: lapriester]
[#34]
PA10 in 308. Palmetto upper:
PA10 260 Remington. Built from stripper Palmetto blem upper receiver, DPMS light profile target crown 20" barrel, UTG Pro HG, AIM DPMS style BCG, YHM low pro clamp on GB, BCM charging handle: 
Same lower on both uppers. |
|
|
WA, USA
|
Posted: 5/14/2015 10:45:26 AM EST
[Last Edit: artener]
[#35]
PA10 20" SS
25yd 
|
|
|
AR, USA
|
Posted: 5/24/2015 2:14:28 PM EST
[#36]
 SDC11012 by [url=https://www.flickr.com/photos/pygar1967/]" />
 SDC11017 by [url=https://www.flickr.com/photos/pygar1967/]" />
My latest Palmetto State project; PSA Freedom upper, 16" stainless barrel, mid-length gas system Magpul MOE handguard, grip and fixed carbine stock Troy BUIS TNArms FDE lower Aim Surplus NiB BCG Critical Capabilities LPK |
|
|
PA, USA
|
Posted: 5/24/2015 9:39:33 PM EST
[#37]
-PTAC 16" govt profile barrel
-YHM rifle length diamond rail -Primary Arms AA Red Dot -Troy fixed front sight -Magpul MBUS rear sight -Nitecore P12 w/ offset mount -PSA blem lower 
|
|
|
WA, USA
|
Posted: 5/25/2015 1:16:49 PM EST
[Last Edit: artener]
[#38]
With rifle stock...
|
|
|
UT, USA
|
Posted: 5/26/2015 2:46:50 PM EST
[#39]
Shipping was great, fit and finish are great, BCG staking is questionable but I'm no operator
PSA "Blem" Lower PSA MOE Lower Build Kit DPMS Armorers Wrench Promag Stock wrench PSA 5.56 Premium HPT/MPI Full Auto Bolt Carrier Group - No Logo BCM Gunfighter Mod 4 Charging Handle The Outdoor Connection Single Point Sling Adapter PSA 16" Mid-length 5.56 NATO 1/7 Premium Upper I had the Miculek Brake and the removable carry handle, and magazines in my parts bin already Left to do: Hiperfire TH24 Trigger (waiting for release) and CavArms C6 Handgaurds 
|
|
|
PA, USA
|
Posted: 5/29/2015 6:14:24 PM EST
[Last Edit: ShaulWolf]
[#40]
Took the accessories off my YHM railed rifle and put them on a new upper I received yesterday.
-PSA upper -PSA Freedom 16" SS lightweight barrel -MI 12" SSK keymod rail I'm quite pleased with how light she is now, and the balance is much closer to the mag well. Very nice ergos and balance, and the mid length gas system keeps her extremely controllable. I'm probably going to throw a Miculek brake on her, and save up for a Primary Arms 1-4x scope to put on the YHM railed upper now. Keep the KMR'd upper as a light close-in/run-and-gun rifle, and turn the quad railed upper into something of a recce-ish build. 
|
|
|
|
Posted: 5/31/2015 7:46:06 PM EST
[Last Edit: panzersergeant]
[#41]
Okay, this is my latest PSA build. Just finished installing the Trijicon night sights; the rear sight was a piece of cake... the front not so much. There are a lot of scratches around the front sight where I had to file the crap out of the novak notch to get the sight to fit.
The beavertail is for a government model which is what I thought this was... the rear of the frame is actually cut for a commander grip safety. I will be replacing it soon. If you have never built a 1911 you are in for a treat. 
I hope it's okay to post it here.
|
|
|
|
|
Posted: 6/3/2015 2:42:14 PM EST
[#42]
Quote HistoryOriginally Posted By blk03shkr:
Pa 10 http://<a href=http://i32.photobucket.com/albums/d22/blk03shkr/8632BA3F-9243-4825-80EB-826606477FB6_zpsrcud7pxe.jpg</a>" /> http://<a href=http://i32.photobucket.com/albums/d22/blk03shkr/7EAF90C5-3E2C-4411-AB7F-C6C414A6A7DE_zpsjqfdijbu.jpg</a>" /> http://<a href=http://i32.photobucket.com/albums/d22/blk03shkr/61F3821F-B0BB-421D-97CE-23D870FE7F05_zpsaezo5pcc.jpg</a>" /> http://i32.photobucket.com/albums/d22/blk03shkr/98FAA9E0-287D-456B-905B-E58EF3792ECA_zps6ohrmgzi.jpg what forearm is that? |
|
|
|
PA, USA
|
Posted: 6/4/2015 12:28:26 AM EST
[Last Edit: ShaulWolf]
[#43]
Looks like a MI SS12G2. Link
|
|
|
WA, USA
|
Posted: 6/5/2015 10:13:09 AM EST
[Last Edit: artener]
[#44]
Freedom 16" SS middy, mine arrived with a fair scrape on the barrel, marks on the barrel nut and a dimple on upper rcvr. I added the lower, scope/scope mount, f/r sights, bcg, CH and bipod.
Zeroed pretty well at 100yrd with Federal xm193. 
|
|
|
IL, USA
|
Posted: 6/5/2015 8:46:26 PM EST
[Last Edit: ARHutch]
[#45]
Just put this one together. Runs great.
Psa upper and lower Psa (FN) CHF 14.7 lightweight, Shaved FSB with pinned BCM mod 0 comp. Geissle SSA Spikes st-t2 Magpul SL stock Magpul moe grip Bcm 13.5 KMR PSA premium bcg BCM mod 4 CH Magpul pro buis Aim point pro 
|
|
|
LA, USA
|
Posted: 6/7/2015 9:06:16 PM EST
[#46]
Those of you with PA-10 with fixed stocks, how did you do it?
I have red DPMS stuff will work, but what about Rock River? it's cheaper. |
|
|
PA, USA
|
Posted: 6/14/2015 11:48:33 AM EST
[#48]
Simple. Spartan. I like.
|
|
|
|
Posted: 6/24/2015 11:50:53 PM EST
[#50]
Finally picked up my PA10 lower and built it tonight:
|
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
