User Panel
Posted: 3/26/2024 11:49:43 AM EDT
No way I can get that unarchived, is there?
They've added a dedicated HF board to it, and now there is a chip to increase presets by like a factor of four, and I don't want to start a new thread. Sorry i didn't tend this garden, family illness has been my priority, and I just can't focus on technical stuff... |
|
|
[#1]
Uh, link?
|
|
|
[#2]
|
|
|
[#3]
I don't know about that thread. This was mine:
https://www.ar15.com/forums/Outdoors/Anysecu-UV-K5-first-thoughts/22-705305/ I just hadn't had time to keep up with all the stuff people have been doing to the thing. I am still hoping for someone to massage the filtering stage over, or select a different component or two in the RF out stages to make it less shitty when it is being used wideband. There is a LOT of custom firmware out there for it, including computer control, which I think is going to wind up being a big deal in time. |
|
|
[Last Edit: smeeg]
[#4]
Originally Posted By high_order1: No way I can get that unarchived, is there? They've added a dedicated HF board to it, and now there is a chip to increase presets by like a factor of four, and I don't want to start a new thread. Sorry i didn't tend this garden, family illness has been my priority, and I just can't focus on technical stuff... View Quote This what you’re talking about? Listen only correct? HF FULL BAND Mod. - Quansheng UV-K5 (Si4732 new chip module) |
|
|
[#5]
Originally Posted By smeeg: This what you're talking about? Listen only correct? https://www.youtube.com/watch?v=jxwBlp8HfKU View Quote Makes you a $12 sw radio you can hand to someone and not worry about getting your good one back. Lots of other good things going on as well. Haven't had time to look at how they are getting along at trimming those horrendous spurs off though |
|
|
[#6]
Who's offering an assembled HF chip kit for these?
Had an at length talk on the air last night with a local friend who did a bunch of firmware mods with his. Says he likes it better than his Baofeng. For $30 plus whatever money I'd have in better HF reception it would be worth experimenting. |
|
|
[Last Edit: Shootindave]
[#7]
Shootindave wants. But I have been humbled by tiny surface capacitor soldering before and have conceded defeat.
|
|
|
[#8]
Damn Buy It Now ...
|
|
|
[#9]
Originally Posted By smeeg: This what you're talking about? Listen only correct? https://www.youtube.com/watch?v=jxwBlp8HfKU View Quote Interesting video. For the price it would be fun to attempt the mod. But I don't like having to leave out that screw to fit the new choke. There has to be a way to fit it in there without removing the screw. |
|
|
[#10]
|
|
Preferred Pronoun: Space Lord Mutherfucker
|
[#11]
|
|
|
[#12]
Originally Posted By high_order1: I don't know about that thread. This was mine: https://www.ar15.com/forums/Outdoors/Anysecu-UV-K5-first-thoughts/22-705305/ I just hadn't had time to keep up with all the stuff people have been doing to the thing. I am still hoping for someone to massage the filtering stage over, or select a different component or two in the RF out stages to make it less shitty when it is being used wideband. There is a LOT of custom firmware out there for it, including computer control, which I think is going to wind up being a big deal in time. View Quote Would like to see this thread unarchived as well. Good discussion taking place and significant development since. |
|
"Zeal without prudence is like a ship adrift."
|
[#13]
Gotta say, this little radio has brought some of my interest back to amature radio. I'm running the nunu firmware, and the dock software for remote control. Pretty fun!
|
|
|
[#14]
Buy another one, and try the new two antenna HF mod. They say with a couple of component changes, it's actually pretty decent.
I haven't been able to keep up with all the firmware forks. Someone told me they are massaging the matching network and found a better PA as well, too. |
|
|
[#15]
I'm going to bump this to keep it out of the archives.
If I get to feeling better, I'll try to do a rollup/rundown of what's going on. I also alluded to another inexpensive handheld for sat work, but, I have it, just can't characterize it presently for a few reasons. Also, in the 152 thread, there is a guy that posted screencaps of him transmitting on... 53Mhz(?) pretty clean with the newest version. Interesting time to be alive! |
|
|
[#16]
I got my UV-K5(8) about a week or so ago
An affordable, hand held general coverage receiver is of great interest to me so the HF mod interests me, and I have the know-how and tools to do it... just don't have a lot of time to mess around with it at that level yet. the only thing I've done so far, is flashed a few changes easily here: https://whosmatt.github.io/uvmod/configurator.html you only need the UV-5R cable to do so, (as well as chirp for channel programming, so if you have one already, it's pretty low-cost of ownership.) |
|
MIA: M/SGT James W. Holt USSF 2-7-68 SVN
"Your freedom to be you includes my freedom to be free from you." -A. Wilkow |
[#17]
Originally Posted By RED_5: I got my UV-K5(8) about a week or so ago An affordable, hand held general coverage receiver is of great interest to me so the HF mod interests me, and I have the know-how and tools to do it... just don't have a lot of time to mess around with it at that level yet. the only thing I've done so far, is flashed a few changes easily here: https://whosmatt.github.io/uvmod/configurator.html you only need the UV-5R cable to do so, (as well as chirp for channel programming, so if you have one already, it's pretty low-cost of ownership.) View Quote You see any movement on them fixing the matching network? |
|
|
[#18]
For whatever reason, my two metal faced k5(99) radios show a pretty clean transmit on 2m. The one plastic face I have is dirty on the 2nd and 4th harmonic. Allegedly they are identical on the inside. It's still a fun little thing to play with!
|
|
|
[Last Edit: ZF-1]
[#19]
Where are you ordering them from?
I see this but it says UV-K6 then UV-K5(8)??
??? |
|
Now a real killer, when he picked up the ZF1, would have immediately asked about the little red button on the bottom of the gun.
|
[#20]
Originally Posted By ZF-1: Where are you ordering them from? I see this but it says UV-K6 then UV-K5(8)?? www.amazon.com/dp/B0CBRZRKXS www.amazon.com/dp/B0CL939BVY ??? View Quote The k5 is usually black with a speaker grill offset to the right. It has a smaller speaker. Some come in camos or grays. The k6/k5(8) has a metalic face around the lcd, and a larger speaker than the k5. The k6/k5(99)has no metal face surrounding the lcd, and comes in differing colors, and also has larger speaker. Summary K5, older smaller speaker offset to the right. K6/k5(8), larger speaker metal face. K6/k5(99), larger speaker no metal face. Internally any k6/k5(xx) is the same. Any plane k5 is the same circutry with a smaller speaker. I'm basing this on my observations which could be wrong, but I purchased 1 of each. Pretty fun to play with. |
|
|
[Last Edit: ZF-1]
[#21]
Originally Posted By shooter64738: The k5 is usually black with a speaker grill offset to the right. It has a smaller speaker. Some come in camos or grays. The k6/k5(8) has a metalic face around the lcd, and a larger speaker than the k5. The k6/k5(99)has no metal face surrounding the lcd, and comes in differing colors, and also has larger speaker. Summary K5, older smaller speaker offset to the right. K6/k5(8), larger speaker metal face. K6/k5(99), larger speaker no metal face. Internally any k6/k5(xx) is the same. Any plane k5 is the same circutry with a smaller speaker. I'm basing this on my observations which could be wrong, but I purchased 1 of each. Pretty fun to play with. View Quote Thank you for the breakdown. I ordered the k6/k5(8), an adapter, and an antenna from signal stuff. Now to go over all the firmwares to figure out what I want to do. I think I read the EGZUMER has the spectrum analyzer on it? https://github.com/egzumer/uv-k5-firmware-custom/wiki/Spectrum-analyzer |
|
Now a real killer, when he picked up the ZF1, would have immediately asked about the little red button on the bottom of the gun.
|
[#22]
I was at an event recently, and some guys had older low band VHF stuff. They were having issues figuring out if their channels were programming correctly....... pulled the UV-K5 out of the vehicle and found the signals down in the 30Mhz range FM.
Cheap little tool. |
|
|
[#23]
that's awesome!
|
|
|
[#24]
There's some filter mods documented for 11/10/6m now. Looks pretty clean. Cleaner than the stock 2m/70cm filters. Sill fm, with dsb emulated. I'm trying to finish up my 6m mods but I keep tinkering with other stuff.
|
|
|
[#25]
I haven't seen it.
The groups are inundated with the HF receive only board mods, so I hadn't really looked lately. Add that to the old farts that do nothing but say the radios are garbage, and it's hard to pick through the noise floor to see what's been innovated recently. The guy that makes the dock had to quit working on that project, I hope someone picks it up. |
|
|
[Last Edit: shooter64738]
[#26]
Originally Posted By high_order1: I haven't seen it. The groups are inundated with the HF receive only board mods, so I hadn't really looked lately. Add that to the old farts that do nothing but say the radios are garbage, and it's hard to pick through the noise floor to see what's been innovated recently. The guy that makes the dock had to quit working on that project, I hope someone picks it up. View Quote This is the HF mod for tx. Same guy is also working on a 6m mod. He may get done before I do. HF TX mod I down loaded the dock source and have been looking at making some changes. I'm also looking at some firmware changes I want to implement, but I need to shrink it down to make room. And yea, there's a while lot of cranky old men who just don't like it and complain... |
|
|
[#27]
Originally Posted By shooter64738: This is the HF mod for tx. Same guy is also working on a 6m mod. He may get done before I do. HF TX mod I down loaded the dock source and have been looking at making some changes. I'm also looking at some firmware changes I want to implement, but I need to shrink it down to make room. And yea, there's a while lot of cranky old men who just don't like it and complain... View Quote Do you know what happened with finding a better final PA? Allegedly it was part of the problem. |
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.