Ruger Precision Rifle (Page 86 of 90)
|
Originally Posted By AR-fan:
I have to ask, is there any reason for me to get a 6mm or 6.5mm creedmoor Ruger Precision rifle when the longest range I have is 300 yards. I have a .223 RPR and also shoot a 6.5 Grendel AR. I don't have any targets to show but they are both really accurate with the Ruger being out front with hand loads. Also, was there a reason for Ruger to stop production of the .223 RPR? |
Chicken Farmer by choice hunter of shade tree's and hiding spots by nature.
| Well I picked up a new gen 3 today and already returned it. Barrel was not center on the receiver. Luckily I was able to return it with no hassel. It wasn't the first one of the current gen 3 that the store had accepted back. This is the first time I have ever had an issue with a Ruger product. |
|
Traded out the stock for a prs. Grip for a penguin and new gen 2pst glass. Attached File |
| How was it going from the RPR stock to a PRS? I've got a 6.5 and a .338 LM. While I don't have any issues at all with the original stock, I've been thinking about switching it out for the PRS. However, the PRS would add approximately an inch to the LOP for me at its shortest. For me that would be stretching it. |
|
Originally Posted By coyotewillie:
How was it going from the RPR stock to a PRS? I've got a 6.5 and a .338 LM. While I don't have any issues at all with the original stock, I've been thinking about switching it out for the PRS. However, the PRS would add approximately an inch to the LOP for me at its shortest. For me that would be stretching it. |
Rule#1: Cardio
If assholes could fly, this place would be a damned airport!
If assholes could fly, this place would be a damned airport!
|
Alright folks, I'm very seriously considering picking an RPR up. My plan is getting This one and slapping a Vudu 5-25 on it in a quality mount or rings. I wont be shooting matches or anything, but there is a strong possibility this rifle would be used for work (SWAT). I see that the Brits are using them in this way, but I want to hear from the folks who own me and have a bunch of trigger time on them. What do y'all think? |
|
Originally Posted By Kiltakaze:
Alright folks, I'm very seriously considering picking an RPR up. My plan is getting This one and slapping a Vudu 5-25 on it in a quality mount or rings. I wont be shooting matches or anything, but there is a strong possibility this rifle would be used for work (SWAT). I see that the Brits are using them in this way, but I want to hear from the folks who own me and have a bunch of trigger time on them. What do y'all think? |
Chicken Farmer by choice hunter of shade tree's and hiding spots by nature.
|
I am seeing the 6mm CM's for ~$900. If I was buying it for me I would pick that up and pick up a match barrel in the caliber I wanted and swap it out. I would sell the 6mm barrel to recoup some of the money. Swapping the barrel is pretty simple but IDK what your department would say about that. |
|
Originally Posted By Shooter_556:
the barrel off center from the receiver or off center in the handguard? I already took the rail off the top of the receiver and cleaned the hell out of it and torqued it to specs. |
|
Originally Posted By Kiltakaze:
Alright folks, I'm very seriously considering picking an RPR up. My plan is getting This one and slapping a Vudu 5-25 on it in a quality mount or rings. I wont be shooting matches or anything, but there is a strong possibility this rifle would be used for work (SWAT). I see that the Brits are using them in this way, but I want to hear from the folks who own me and have a bunch of trigger time on them. What do y'all think? |
|
Originally Posted By Gerkyn:
I'm pretty sure mine is. The shots go further and further right the longer the range, and it's certainly not spin drift. I believe it's about 8MOA at 1000 yards. I already took the rail off the top of the receiver and cleaned the hell out of it and torqued it to specs. Originally Posted By Gerkyn:
Originally Posted By Shooter_556:
the barrel off center from the receiver or off center in the handguard? I already took the rail off the top of the receiver and cleaned the hell out of it and torqued it to specs. |
"And then I woke up."
"Next time the worlds ending, grab a gun.”
Dean
"Next time the worlds ending, grab a gun.”
Dean
|
Originally Posted By Kiltakaze:
Alright folks, I'm very seriously considering picking an RPR up. My plan is getting This one and slapping a Vudu 5-25 on it in a quality mount or rings. I wont be shooting matches or anything, but there is a strong possibility this rifle would be used for work (SWAT). I see that the Brits are using them in this way, but I want to hear from the folks who own me and have a bunch of trigger time on them. What do y'all think? That’s my 1 and only issue. I think it’s a fantastic rifle at the price point. Mine shoots amazing, and I’m not a bolt guy. Sub .5” groups are not that challenging. |
Callsign: Boom.
|
Originally Posted By AHC222:
A 5-25 seems like a lot of glass on a work gun. Something like a 2-10 NF seems to fit the role better IMO. |
|
Originally Posted By sparkyD:
I think your could learn a lot by going back through this thread and reading it. Both my rifles have been really accurate. Price wise I think you might do better shopping around. Only thing where SWAT work is concerned the RPR is really heavy! 
|
| Given the concerns with weight, are there any go-to solutions for making this pig lighter? I haven't the chance to really shoot mine, other than from static positions, so the weight hasn't been an issue. At some point, when I'm confident enough, I'd like to shoot a PRS-style match with it. If I could get away with using the RPR, with a few tweaks to make it more manageable, I'd prefer to go that route. Dropping money on another rifle just for an occasional match seems a little foolish. How much weight can one save, realistically, with a swap of the hardware, and barrel? |
Feed a cold, starve a fever, sleep off a concussion!
|
Originally Posted By webman:
Given the concerns with weight, are there any go-to solutions for making this pig lighter? I haven't the chance to really shoot mine, other than from static positions, so the weight hasn't been an issue. At some point, when I'm confident enough, I'd like to shoot a PRS-style match with it. If I could get away with using the RPR, with a few tweaks to make it more manageable, I'd prefer to go that route. Dropping money on another rifle just for an occasional match seems a little foolish. How much weight can one save, realistically, with a swap of the hardware, and barrel? |
Rule#1: Cardio
If assholes could fly, this place would be a damned airport!
If assholes could fly, this place would be a damned airport!
|
Originally Posted By Kiltakaze:
Not any heavier than issued guns Originally Posted By Kiltakaze:
Originally Posted By sparkyD:
I think your could learn a lot by going back through this thread and reading it. Both my rifles have been really accurate. Price wise I think you might do better shopping around. Only thing where SWAT work is concerned the RPR is really heavy! |
Chicken Farmer by choice hunter of shade tree's and hiding spots by nature.
|
Originally Posted By sparkyD:
The county issue rifle is a 700sps with a 3.5x10 leupold that’s quite a bit lighter than either of my RPR’s but then again our county is poor and the ar15’s are usually grabbed first and to tell the truth most of our deputies actually shoot them better than they do the bolt gun. I think the local gun store donated the rifle to the county sheriffs or they wouldn’t have it. |
|
Originally Posted By Kiltakaze:
We issue our snipers AI AT308s with Nightforce ATACR 5-25s. Heavy SOBs but amazing rifles. We aren't poor, but we aren't rolling in money either. We have started to try and upgrade all of our firearms. Originally Posted By Kiltakaze:
Originally Posted By sparkyD:
The county issue rifle is a 700sps with a 3.5x10 leupold that’s quite a bit lighter than either of my RPR’s but then again our county is poor and the ar15’s are usually grabbed first and to tell the truth most of our deputies actually shoot them better than they do the bolt gun. I think the local gun store donated the rifle to the county sheriffs or they wouldn’t have it. |
Chicken Farmer by choice hunter of shade tree's and hiding spots by nature.
|
Originally Posted By sparkyD:
Sounds like y’all have a good armorer to setup the rifle system. I don’t know what the Poteau PD has but I bet it’s better than county. Our county is pretty large and the deputy’s have opted for the AR platform due to response time and the fact there’s so few deputies.
|
|
Originally Posted By Kiltakaze:
We issue our snipers AI AT308s with Nightforce ATACR 5-25s. Heavy SOBs but amazing rifles. We aren't poor, but we aren't rolling in money either. We have started to try and upgrade all of our firearms. |
Rule#1: Cardio
If assholes could fly, this place would be a damned airport!
If assholes could fly, this place would be a damned airport!
|
Originally Posted By 03PSD:
Being in Colorado I bet mile high shooting gives them a pretty decent deal on AI sticks. Originally Posted By 03PSD:
Originally Posted By Kiltakaze:
We issue our snipers AI AT308s with Nightforce ATACR 5-25s. Heavy SOBs but amazing rifles. We aren't poor, but we aren't rolling in money either. We have started to try and upgrade all of our firearms.
|
"And then I woke up."
"Next time the worlds ending, grab a gun.”
Dean
"Next time the worlds ending, grab a gun.”
Dean
|
Originally Posted By Kiltakaze:
Just talked admin into buying 60 Gen5 G17s with TLR1s and RMRs too |
John 3:16 For God so loved the world, that he gave his only Son, that whoever believes in him should not perish but have eternal life.
|
Originally Posted By EzGoingKev:
I am seeing the 6mm CM's for ~$900. If I was buying it for me I would pick that up and pick up a match barrel in the caliber I wanted and swap it out. I would sell the 6mm barrel to recoup some of the money. Swapping the barrel is pretty simple but IDK what your department would say about that. The barrel swap wasn't any more difficult than swapping an AR barrel. Just need go/no go gauges. |
|
Originally Posted By molar:
The barrel swap wasn't any more difficult than swapping an AR barrel. Just need go/no go gauges. I used: - Magpul AR wrench - Seekins Precision action rod - Go/No guages - Vice - Breaker bar - Torque wrench |
|
Originally Posted By ziarifleman:
Are you 100% positive your scope tracks perfectly? Originally Posted By ziarifleman:
Originally Posted By Gerkyn:
Originally Posted By Shooter_556:
the barrel off center from the receiver or off center in the handguard? I already took the rail off the top of the receiver and cleaned the hell out of it and torqued it to specs. I did a tracking test today and it's definitely tracking right. I confirmed scope level when I got home Scope is a Vortex Viper PST 6/24x50 FFP Test shot at 100yards, went up 8MOA each shot starting at 100yard zero. The line on the test was leveled using my phone since I forgot the level at home. Could their be a problem with the scope? I am not sure how much the scopes bubble level plays into it since I am not of a skill level to be able to pay attention to it and all the other fundamentals of long range. 
Level of the scope using a line on the wall and a light down the scope. (The line on the left with an actual level, the right line is my phone to check its calibration) Tracking test 
Level on the scope rail(right), scope turret(center) and the scopes bubble level is apparently off, I was trying to keep it level during the test(left) Rifle is pointing to the left in this image 
|
|
Originally Posted By RJeff21:
Figured this would be the best place to ask: Does Ruger sell the stock RPR buttstock separately or are there any retailers that carry them? I’ve been searching all over and can’t seem to find one. |
BikerNut:
Normal people like motorcycles. Real people like motorcycles.
People who don't like motorcycles are just... weird.
Normal people like motorcycles. Real people like motorcycles.
People who don't like motorcycles are just... weird.
|
Maybe this has been covered already, 86 pages and all.
I have had a couple end cap strikes with RPR with a Dead Air Sandman L. Spoke to Dead Air about it today. The rep said its probably because im shooting subsonic rounds. that they dont stabilize in the 1/10 barrel. Is there anyone making a 1/7 barrel? Also what ammo are you shooting in your suppressed .308? |
PFG #397
Rob3220:
"Walmart Ammo isn't good for anything. I don't think it even breaks skin. Rounds are made of compressed Jell-O, if I recall correctly."
Rob3220:
"Walmart Ammo isn't good for anything. I don't think it even breaks skin. Rounds are made of compressed Jell-O, if I recall correctly."
|
Originally Posted By jake-cutter:
Well I picked up a new gen 3 today and already returned it. Barrel was not center on the receiver. Luckily I was able to return it with no hassel. It wasn't the first one of the current gen 3 that the store had accepted back. This is the first time I have ever had an issue with a Ruger product. |
|
A co-worker and I both bought Gen 3s a couple weeks ago at a big sale our local BX was having. His a 6.5CM and mine a 308. Both had loose handguards and mis-timed comps. My comp was not only mis-timed but loose and easily movable by hand. I fixed my issues and have been finishing up customizing the rifle the past couple weeks before firing. I’m hoping no other issues arise, especially accuracy issues.
- Vortex Viper PST II - Magpul PRS - Harris BRMS Attached File |
|
Originally Posted By gopeder111: Now I’m kind of nervous, the 2 I looked at yesterday both had slightly misaligned mlok handguards and I was told most of them were like this. I did not check to see if the barrel itself was off center to the receiver before buying the one with the least misaligned handguard. Is this a known issue with the gen 3’s? I might have to send it to ruger right away when I pick it up in a few days.  I ended up canceling the purchase and going with a tikka instead. I really wanted the RPR to work out for me due to the ease of barrel changes and incredible magazine compatibility but every single gen 3 I looked at seemed to have some sort of QC issue unfortunately.
|
|
Originally Posted By gopeder111: Now I’m kind of nervous, the 2 I looked at yesterday both had slightly misaligned mlok handguards and I was told most of them were like this. I did not check to see if the barrel itself was off center to the receiver before buying the one with the least misaligned handguard. Is this a known issue with the gen 3’s? I might have to send it to ruger right away when I pick it up in a few days. |
|
Today I pulled my rifle out of the safe after not shooting it at all this year. First shot...nothing, pulled the round, no firing pin strike at all...tried 4 more rounds, still nothing, none of the primers had any marking or indentation whatsoever. I figured the firing pin was gummed up or something so I took the bolt apart and found this little chunk come out when I took the 'shroud' off. Looks like it is one of the cocking cams. How did it happen? The rifle has MAYBE 150 rounds through it, all factory Hornady ammo. No overcharged reloads or anything. And how do I replace the part? Is this something I'll have to send to Ruger? Looks like it is called the ‘firing pin back’. Attached File 
|
Signatures are stupid and annoying.
|
I just swapped mine out last night with one of these -
https://adarmscustomrifles.com/collections/custom-components/products/ruger-cocking-piece I have 1850 rounds through mine without any issues but I figured for $65 I would swap it out for something I did not have to worry about. |
|
Originally Posted By EzGoingKev:
I just swapped mine out last night with one of these - https://adarmscustomrifles.com/collections/custom-components/products/ruger-cocking-piece I have 1850 rounds through mine without any issues but I figured for $65 I would swap it out for something I did not have to worry about. |
Signatures are stupid and annoying.
|
Originally Posted By Techsan02:
Did you do it just because? Or did yours break also? Originally Posted By Techsan02:
Originally Posted By EzGoingKev:
I just swapped mine out last night with one of these - https://adarmscustomrifles.com/collections/custom-components/products/ruger-cocking-piece I have 1850 rounds through mine without any issues but I figured for $65 I would swap it out for something I did not have to worry about. |
|
Originally Posted By EzGoingKev:
I just swapped mine out last night with one of these - https://adarmscustomrifles.com/collections/custom-components/products/ruger-cocking-piece I have 1850 rounds through mine without any issues but I figured for $65 I would swap it out for something I did not have to worry about. |
Chicken Farmer by choice hunter of shade tree's and hiding spots by nature.
|
Originally Posted By sparkyD:
I book marked this page. Did it help smooth or lighten the upward cocking of the bolt handle? I have not shot the rifle in a while. I have over 1800 rounds on it with A LOT of working the action back and forth and dry firing the rifle. I never really noticed any issues with the factory part. There is a guy over on the hide that rigged something up so he could use his trigger pull gauge to measure it. He recorded a significant change. https://forum.snipershide.com/threads/ruger-precision-rifle-discussion.6252612/post-8025176 It was much easier to swap out than I thought it would be. |
|
Originally Posted By EzGoingKev:
It seemed like it did but I am not 100% sure. I really need to run the gun. I have not shot the rifle in a while. I have over 1800 rounds on it with A LOT of working the action back and forth and dry firing the rifle. I never really noticed any issues with the factory part. There is a guy over on the hide that rigged something up so he could use his trigger pull gauge to measure it. He recorded a significant change. https://forum.snipershide.com/threads/ruger-precision-rifle-discussion.6252612/post-8025176 It was much easier to swap out than I thought it would be. Originally Posted By EzGoingKev:
Originally Posted By sparkyD:
I book marked this page. Did it help smooth or lighten the upward cocking of the bolt handle? I have not shot the rifle in a while. I have over 1800 rounds on it with A LOT of working the action back and forth and dry firing the rifle. I never really noticed any issues with the factory part. There is a guy over on the hide that rigged something up so he could use his trigger pull gauge to measure it. He recorded a significant change. https://forum.snipershide.com/threads/ruger-precision-rifle-discussion.6252612/post-8025176 It was much easier to swap out than I thought it would be. 
|
Chicken Farmer by choice hunter of shade tree's and hiding spots by nature.
|
Originally Posted By EzGoingKev:
Let us know what your native language is and maybe someone can translate the text in bold for you. Originally Posted By EzGoingKev:
Originally Posted By Techsan02:
Originally Posted By EzGoingKev:
I just swapped mine out last night with one of these - https://adarmscustomrifles.com/collections/custom-components/products/ruger-cocking-piece I have 1850 rounds through mine without any issues but I figured for $65 I would swap it out for something I did not have to worry about. |
Signatures are stupid and annoying.
Ruger Precision Rifle (Page 86 of 90)
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter