Posted: 8/16/2018 5:40:43 AM EDT
|
Hey guys I just bought a new Tipton carbon fiber cleaning rod for my RPR 6.5 creedmoore.
The only size they had @ the store was the 44" 27-45 cal. With the 6.5cm technically being .264 this rod I have is too big. 
But I ran it thru my bore and bore guide and it seems to fit perfectly. My question is , am I good to go to keep this size? Or do I need to drop down to the 22-25 cal when they get one in. It doesn't feel like the rod is touching inside of rifling so I think I'm in the clear? Any input appreciated as I don't want to wreck my barrel |
| While it might fit through I would be worried about how tight it actually is in there. You are starting with a size that is meant for a size larger than the bore you have. I use the .22-.25s on my rifles. I would return it and get the other one. |
http://www.teamblaster.net
|
I have a similar Tipton carbon fiber cleaning rod... the brass end measures 0.245" so the clearance inside your bore would be about 0.020" (0.010" on each side). While that might be OK when cleaning a relatively clean bore, what happens if there is some grit in your bore? If you are cleaning a plinking rifle, I don't think it would be a problem but if you are talking about a "precision" rifle, I'd suggest going down to the recommended size. Alternatively, you could just run a boresnake through the bore to remove any "big" grit before using the rod...
Personally, I haven't used a rod in my bore (except to push bullets out of the throat of my rifle when I am using my Hornady comparitor to find my lands CBTO) since break-in. |
|
Thanks for the info guys I think I'll just play it safe and return it for the correct size.
Only thing that sucks is they didn't have the tipton in the correct size. They did however have a Montana extreme rod in correct length and caliber. It looks like a nicer rod but it's more $ and it's coated vs the carbon fiber |
|
Originally Posted By Pilotscrappy:
Thanks for the info guys I think I'll just play it safe and return it for the correct size. Only thing that sucks is they didn't have the tipton in the correct size. They did however have a Montana extreme rod in correct length and caliber. It looks like a nicer rod but it's more $ and it's coated vs the carbon fiber |
