SLR15 AR15 / M16 / M4 / AR308 Armorer Course

When:  January 30-31, 2024

Where:  Defiance, Missouri

We conducted a 2-day (16-hour) AR15 / M16 / M4 / AR308 Armorer course by the  St. Charles County Sheriff's Dept.  This was our second time teaching Armorer courses here, and we look forward to future courses.  The training room was set up to allow plenty of table space, great lighting to see small parts, and a large screen with projector and numerous HDTV's around the training room that allowed us to show project animated graphics of the weapons system and powerpoint of detailed pics of gun parts, especially when looking at finer detail things like machining, stress cracks & wear.

The student base was a mix of Law Enforcement Officers all over Missouri, and Kansas.

Rifles represented in this course were SLR15, Colt, Noveske, Daniel Defense, Diamondback, LWRC, Rockriver, DPMS, Aero Precision, Blackrain,  Aero Precision, Andereson, and a few custom builds.

Day-1 started the day by going through the course manual that all students are given.  Students were supplied with their own set of basic tools that are necessary to do 95% of the work on their rifles (short of restocking and rebarreling, of which wrenches and sometimes fixtures are necessary), Slip2000 "EWL" Extreme Weapons Lubricant and #725 Cleaner Degreaser, etc.  A short session of nomenclature was covered, at which time covered every feature and exterior piece of the rifle to include all the hidden design features that most people are not aware of, and everyone prepped the rifles for disassembly work.  Everyone was taught the procedure series of checks that we recommend.

Everyone was taught our recommended way to field strip a rifle, and why we do it this way so as not to cause damage, premature wear or stress on anything. We covered maintenance of where and what to clean, and what needs lubrication to keep it running.  We showed why not to use the firing pins as tools.  We showed everyone our recommendation of how to remove fouling and why, and everyone got to use our methods.

We also showed how to clean suppressors, and why we recommend that suppressors be cleaned on a regular basis.  There were several suppressed rifles in this class, and the consensus is that none of them had ever been cleaned or inspected, and several of these were estimated to have at least 10k-18k rounds through them.   Several of these Officers took advantage to use our cleaning tools and methods, and soaked them in Slip2000 Carbon Killer, which after a couple of hours of soaking people got to see huge amounts of the carbon fouling coming out.    

The entire bolt carrier assembly was covered, to include inspections, maintenance, upgrades, 3 types of gas rings, and differences in finishing and machining. carrier key (gas key) installation and staking, ejector systems, etc.  Everyone was introduced to the different types of gas rings.  We went through what each type does, and their proper installation order.   Bolts were fully gone through, which included extractors, extractor springs/inserts/O-rings.  The ejectors were removed, cleaned, and inspected.

Note:  A couple of bolt carrier assemblies were found to have worn out gas rings.  This is something we see on occasion, especially on suppressed rifles, which we attribute to the heavier carbon fouling build up and its effects of it wearing on parts.

Note:  Several bolts on the higher round count rifles were found to have worn out gas rings.  We supplied new gas rings, and got these back into proper working order.

Note:  There were two rifles in class from Diamondback.  Neither of these rifles had an extractor spring insert.  We supplied these Officers with new black ones, which were installed, and added O-rings as well.

Note:  We went through proper carrier key staking.  Several people found their gas keys were lightly staked.  We supplied everyone with a MOACKS and Sully Gas Key Staking Tools, everyone decided to use the Sully Gas Key Staking Tool and get things corrected.  The Noveske rifle in class was a guess about 7-8 years old according to its owner, and had a estimated round count of 1200rds.  It had a cracked gas key, right at the screw hole.  We offered to supply a new gas key and screws, along with staking tools, but the Officer declined stating he wanted to put it back into Noveske's hands to show them about the staking and let them fix it.

We got into the lower receiver assemblies, starting with the fire control group (trigger group).  We teach this in a building block format, starting with baby steps of getting things out and in, then build into how things work.  Everyone learned how to install and remove things so you don't cause damage.  We went through detailed inspections of all the sear engagement surfaces, spring types, single stage, and two stage trigger systems.

At the end of the day everyone put their rifles back together, making sure that everything was in proper working order.

Day-2 started with a review of everything that was covered on day-1, with some greater details and myths covered.  We then went back into trigger groups in great details, covering single stage, 2-stage, good and bad triggers, differences and options in spring systems, diagnosing problems when semi-auto turns into burst, and showing the differences in quality of triggers that are on the market.  Once done with semi-auto trigger systems, we went into select fire trigger groups covering full-auto and burst trigger groups, to include replacement and diagnosing and repairs when experiencing malfunctions.

After trigger systems, we went through the rest of the lower receivers.  Everyone in this class had collapsible stocks. We covered the proper mounting & gauging, and proper castle nut staking on the collapsible stocks, and there were a few that had to be remounted to get them properly indexed, and a hand full of them needed to be staked.

Everyone stripped their lower receivers, which allowed a chance for further inspections, and we went through a session on troubleshooting.  Once everyone was comfortable with the entire lower receiver assembly, they were put back together, inspected, and made sure everything is in proper working order.

We then got into a session on the timing.  This is where we cover proper cycling, covering what effects timing, and how & what happens when it is out or proper time, dwell time, suppressor issues, etc, and how to get things into proper timing.  This also led us into piston systems.  We covered how the piston system works, break down and maintenance of the system (Yes piston systems do get dirty and have to be cleaned and maintained), how to properly adjust for timing changes, and trouble shooting.  We also covered dwell time, and how it pertains to cycling issues, and hopefully got the point across of why we do not recommend barrel lengths shorter than 11.5" on unsuppressed rifles.

Note:  During the timing session, we showed examples of adjustable gas blocks, and we also showed the gas control system from https://www.riflespeed.com/, which we like as it is adjustable with a quick turn by hand to one of the 12 different settings, and is well built for durability.

We showed how suppressors are properly mounted and gauged.  Several people took advantage of the bore gauges that we make, and checked their alignment on their rifles that had suppressors.

The last half of day-2 was spent on the upper receiver assembly.  We covered barrel removal, mounting, fixturing, gauging  & inspections.  We show numerous ways to fixture a barrel into a vise, and our preference as to which fixtures/methods to use when and how.  We showed how to  mount, then properly torque and gauge the barrel system, which ensures it is in proper working order.

Note:  One Officer had brought one of his departments M16's to class as it was out of service for an ejection port cover that was flopping loose, where the spring was unwound.  Upon closer inspection, it was found to have a bend ejection port cover door and guide rod.  We supplied the Officer a new one, and it was replaced an gotten back into proper working order.  It is always a bonus to make the needed repairs in class and get duty firearms back into service.  

At the end of the day everyone put their rifles back together, everything was inspected and gauged to make sure it was in proper working order.  Everyone did chamber inspections, checked & gauged the four gas seals, firing pin protrusion, trigger press, and headspace.

Here is a brief overview of a few things that were covered:
History of the Weapon
Cycles of Function
General Disassembly & Assembly
Identification of Common Problems and Parts
Nomenclature
Identification of Group Components
Semi, Burst, and Full Auto Parts and Conversions
Complete Armoring Disassembly / Assembly
Barrel Replacement
Cleaning and Maintenance
Sight and Distance Considerations
Ballistic Issues
Barrel: Twist, Length, and Profiles
Gas Systems & Piston Systems
Parts Interchangeability, including Brands
Headspace
Firing Pin Protrusion
Trigger Systems
Chamber Inspection and Issues
Troubleshooting, diagnosis & repair
Gauging, Inspections, Stress & Interval Issues
Accessories and Customizing
Tool Options and Selection
SOP/MOD Accessories and Additions



CY6
Greg Sullivan "Sully"
SLR15 Rifles
DefensiveEdge.com
(763) 712-0123